| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Test: Run recovery_unit_test on marlin.
Test: `Run graphics test` on marlin.
Change-Id: I8239c3d9fb288f80ee11f615402768ff8ef8ecd0
|
|
These functions take the given GRSurface instances as inputs, which
shouldn't be altered.
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test.
Test: `Run graphics test` on marlin.
Change-Id: I51bf408e85faae2b497d4f148ab1dec22dd16c93
|
|
This CL adds GRSurface::Create() and dtor for managing the allocated
memory in GRSurface class. It also adds GRSurface::data() that hides the
underlying implementation, with both of const and non-const overloads.
This allows `const GRSurface&` to be more useful - previously it only
ensured a const member variable of `data`, instead of a read-only buffer
it points to.
It also marks the parameters in gr_texticon() and gr_blit() as const, as
they're incoming source that shouldn't be altered. It corrects the type
of gr_draw, which is the sink to be painted on (an earlier attempt was
made in [1], but didn't get the full picture correctly).
[1] https://android-review.googlesource.com/c/platform/bootable/recovery/+/704757/
Test: mmma -j bootable/recovery
Test: recovery_unit_test on marlin
Test: Run graphics test on marlin (fbdev).
Test: Run graphics test on blueline (drm).
Change-Id: I7904df084cd6c08fa04a9da97d01b4b1a6e3a20c
|
|
Add a function in screenUI to display the pre-generated graphs for
rescue party. If these graphs are not valid, falls back to display
the old text strings.
Right now we haven't generated the localized graphs yet, so the UI
always shows the TextMenu.
Bug: 116655889
Test: check rescue party under recovery
Change-Id: I0558cb536b659cdc25c8b7946d3a39820935b003
|
|
As we plan to show localized rescue party dialogs under recovery mode
with pre-generated images, it becomes necessary to show the menu headers
and items with images.
This cl converts the menu class to a interface and derived TextMenu &
GraphicMenu classes. And the GraphicMenu uses GRSurfaces* as the menu header
and a list of GRSurfaces* as menu items.
Moreover, factor out the Draw* functions in the ScreenUI into a separate
DrawInterface. Therefore, the Menu class can access these draw functions and
use them to implement the DrawHeaders & DrawItems neatly.
Bug: 74397117
Test: unittests pass, boot into recovery and check menu
Change-Id: I95cee30f3e5eb666eb6fbcdfc873a7260fc177c1
|
|
The matching change to build system now writes these values as build
properties for recovery image. This allows us dropping the dependency on
Android.mk (as well as having more flexibility to do UI customization).
Also rename a few constant names, as the naming doesn't fully follow the
style guide (which reads "whose value is fixed for the duration of the
program").
Bug: 110380063
Test: Build and flash recovery image on taimen, which uses custom margin
height. Check the UI and choose `Run graphics test`.
Change-Id: I2c50326123639cb36022f51b62cdeed925d77ba7
|
|
Change pthread usage to std::mutex,
lock_guard, unique_lock, thread, or
condition_variable as appropriate.
Test: Recovery works, recovery_component_test pass
Bug: 78793464
Change-Id: Ibf0b1bbedcf0b6e32fc4ee6aaadd17f21b4d7077
|
|
Test: Build and boot into recovery on walleye. Check the long press
detection; `Run graphics test`.
Change-Id: Ic3e9b0652fc3ff6fb3ad118df5ebb9bb4abda2cd
|
|
Add the ability to change the contents of
the title lines, displayed at the top of
the screen. Once set, the same lines are
displayed for all menus until changed again.
Test: Recovery works
Bug: 78793464
Change-Id: I7ef5594b0d76dbbd2e01ad7508863af1270b2a2a
|
|
Test: mmma -j bootable/recovery
Test: Build and boot into recovery, w/ and w/o enabling quiescent mode
respectively.
Change-Id: I5d9bb945a6c3c9a3b96199fa0c8071a2f91339a0
|
|
The last character at EOL is cut when showing the prompt-for-data-wipe
message on angler. Address the issue by keeping symmetrical margins
based on the given offset.
Test: Trigger prompt-and-wipe-data menu. No cutout character at EOL.
Change-Id: Id6e8dc7815bf681435bcaf13e7bdd09cf870d95f
|
|
ScreenRecoveryUI already has the info in locale_.
Also when showing "Current locale: X/Y" on screen, use 1-based index for
X, so that we have 1 <= X <= Y.
Test: Build anf flash recovery image on aosp_bullhead-userdebug. Choose
`Run locale test` from UI.
Change-Id: I5dd4de82e63890ddf755f4e23cd2290ad5d50ece
|
|
This removes some reliance on the global
locale and ui variables.
Test: Recovery works
Bug: 78793464
Change-Id: I78f1a2b321f5d50aa58b10735a73ae137283353a
|
|
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin.
Test: Build and boot into recovery image on angler. Check the UI that
shows menu ('View recovery log', 'Wipe data', 'Run locale test').
Test: Start recovery with '--prompt_and_wipe_data'. Check the UI.
Change-Id: If8a4209e0bb4ca64f719f9f9465d3b3589a69cdc
|
|
Since we instantiate a Menu object each time for a given set of
header/items, we don't have a use case of re-populating an existing Menu
with different data (which is what Menu::Start() does).
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin.
Test: Build and boot into recovery image on angler. Check the UI.
Change-Id: Iaa2ba9d406ebd74c015e43198c17c5335b38df53
|
|
Test: mmma -j bootable/recovery
Test: Build and boot into recovery image on angler. Check the UI.
Test: Repeat the same test on devices using wearable UI.
Change-Id: I1a67ff4ae8de4d7a8dc66326cf07f95c89e95152
|
|
Remove the use of fopen_path() in screen_ui.cpp, as this is the only
place that requires the dependency on common.h. The mounting work should
be done by the caller.
Also change the parameter in RecoveryUI::ShowFile() from const char* to
const std::string&.
Test: mmma -j bootable/recovery
Test: Build and boot into recovery image on angler. Choose 'View
recovery logs'.
Change-Id: I8e63f14a8e2b12b856e5a92476e4226cd6ea39fb
|
|
From caller's PoV, RecoveryUI::{Start,Select,End}Menu should always be
used together, i.e. to show a menu and get user's selection. This CL
provides ShowMenu() as one-stop service (which is based on
get_menu_selection() from recovery.cpp).
Also move RecoveryUI::{Start,Select,End}Menu into ScreenRecoveryUI, with
a dropped access level from public to protected.
Due to the dependency on recovery / librecovery refactoring, will add
testcases in follow-up CLs.
Test: Build and boot into recovery image. Check the menus (main menu,
'View recovery logs', 'Wipe data/factory reset').
Change-Id: Ie17aa78144871a12affd6f9075e045f76608a0ba
|
|
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI
and WearRecoveryUI. This helps us to support text icons as menu in the
future.
Bug: 74397117
Test: Check the menu under recovery on bullhead and a wear device.
Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b
Merged-In: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b
|
|
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI
and WearRecoveryUI. This helps us to support text icons as menu in the
future.
Bug: 74397117
Test: Check the menu under recovery on bullhead and a wear device.
Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b
(cherry picked from commit 2b3f80068ece1040ba7c923afe1e70b705535ad5)
|
|
Change drawing of horizontal bars.
Implement image and background drawing.
Bug: 65556996
Test: Viewed graphics test
Change-Id: I68ddd997123607dbebf972af5a455ce8ef0c7075
|
|
Add a new option "Run locale test" to check the background text
images (i.e. texts for "erasing", "error", "no_command" and "installing"
with different locales.)
Use volume up/down button to cycle through all the locales embedded in
the png file, and power button to go back to recovery main menu.
Test: Run locale test with bullhead.
Change-Id: Ib16e119f372110cdb5e611ef497b0f9b9b418f51
|
|
Localized texts only make sense on devices with screens.
Test: Run fake OTA on angler; check the on-screen texts.
Change-Id: I3a644294c8b1f2056cfb78b2d61a598b8ddf2acf
|
|
By grouping similar kinds together, in an order of types, constants,
ctor/dtor, all other methods and data members.
Also rename ScreenRecoveryUI::density_ to ScreenRecoveryUI::kDensity to
align with others.
Test: mmma bootable/recovery
Change-Id: I1ba2d15c05ba7be8c39762f3d9dadf1fb2130de4
|
|
After the cleanup to WearRecoveryUI, text_top_ now always equals to
((text_row_ + 1) % text_rows_).
Test: Check the recovery UI and 'View recovery logs'.
Change-Id: I69a7f377bbd990db2194f9d3efae257c323c06a8
|
|
Prior to this CL, menu_ is allocated with a fixed length of text_rows_.
However, because we support scrollable menu in wear_ui, there might be
more menu entries than text_rows_, which would lead to out-of-bounds
array access. This CL addresses the issue by switching to std::vector.
Bug: 65416558
Test: Run 'View recovery logs' on angler.
Test: Set large margin height that leaves text_rows less than 21. Then
run 'View recovery logs' with 21 menu entries.
Change-Id: I5d4e3a0a097039e1104eda7d494c6269053dc894
(cherry picked from commit e15d7a5104978cd8399501636aec0df9c1a4823c)
|
|
Prior to this CL, menu_ is allocated with a fixed length of text_rows_.
However, because we support scrollable menu in wear_ui, there might be
more menu entries than text_rows_, which would lead to out-of-bounds
array access. This CL addresses the issue by switching to std::vector.
Bug: 65416558
Test: Run 'View recovery logs' on angler.
Test: Set large margin height that leaves text_rows less than 21. Then
run 'View recovery logs' with 21 menu entries.
Change-Id: I5d4e3a0a097039e1104eda7d494c6269053dc894
|
|
This CL adds ScreenRecoveryUI::DrawWrappedTextLines() to better handle
long menu header texts. It does a word wrap at spaces, if available.
This avoids fixed-length menu headers being truncated on small screens.
Bug: 64293520
Test: On bullhead, boot into recovery with --prompt_and_wipe_data, and
check the prompt texts.
Change-Id: Ia22746583516dd230567a267584aca558429395e
(cherry picked from commit 2bbc6d642d1fbfb007905d95b629fe5f833b2a1b)
|
|
This CL adds ScreenRecoveryUI::DrawWrappedTextLines() to better handle
long menu header texts. It does a word wrap at spaces, if available.
This avoids fixed-length menu headers being truncated on small screens.
Bug: 64293520
Test: On bullhead, boot into recovery with --prompt_and_wipe_data, and
check the prompt texts.
Change-Id: Ia22746583516dd230567a267584aca558429395e
|
|
With the following Makefile variables, we can reduce the work of writing
(copy/pasting) device-specific WearRecoveryUI classes.
The list of Makefile variables (the ones useful for Wear devices):
- TARGET_RECOVERY_UI_MARGIN_HEIGHT (default: 0)
- TARGET_RECOVERY_UI_MARGIN_WIDTH (default: 0)
Specify the margin space that we don't want to display texts. They
replace the former outer_width and outer_height.
- TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD (default: 50)
- TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD (default: 90)
Specify the sensitivity of recognizing a swipe. Devices give absolute
positions, so for some devices we need to adjust the thresholds.
- TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE
Specify the progress bar vertical position, which should be adjusted
to the actual height of a device. It replaces the former
progress_bar_y.
- TARGET_RECOVERY_UI_ANIMATION_FPS (default: 30)
Specify the animation FPS if using device-specific animation images.
It replaces the former animation_fps.
Devices can specify "TARGET_RECOVERY_UI_LIB := librecovery_ui_wear",
with optionally defined Makefile vars above, in BoardConfig.mk to
customize their WearRecoveryUI.
Also remove the obsolete wear_touch.{cpp,h}, which has been merged into
ui.cpp in commit 5f8dd9951d986b65d98d6a9ea38003427e9e46df.
Bug: 64307776
Test: Change the device BoardConfig.mk and test recovery image.
Change-Id: Id0fb2d4e3977ab5ddd31e71f9535470cab70e41b
(cherry picked from commit 0470ceea381775b09eee931858c3320be88cc637)
|
|
With the following Makefile variables, we can reduce the work of writing
(copy/pasting) device-specific WearRecoveryUI classes.
The list of Makefile variables (the ones useful for Wear devices):
- TARGET_RECOVERY_UI_MARGIN_HEIGHT (default: 0)
- TARGET_RECOVERY_UI_MARGIN_WIDTH (default: 0)
Specify the margin space that we don't want to display texts. They
replace the former outer_width and outer_height.
- TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD (default: 50)
- TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD (default: 90)
Specify the sensitivity of recognizing a swipe. Devices give absolute
positions, so for some devices we need to adjust the thresholds.
- TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE
Specify the progress bar vertical position, which should be adjusted
to the actual height of a device. It replaces the former
progress_bar_y.
- TARGET_RECOVERY_UI_ANIMATION_FPS (default: 30)
Specify the animation FPS if using device-specific animation images.
It replaces the former animation_fps.
Devices can specify "TARGET_RECOVERY_UI_LIB := librecovery_ui_wear",
with optionally defined Makefile vars above, in BoardConfig.mk to
customize their WearRecoveryUI.
Also remove the obsolete wear_touch.{cpp,h}, which has been merged into
ui.cpp in commit 5f8dd9951d986b65d98d6a9ea38003427e9e46df.
Bug: 64307776
Test: Change the device BoardConfig.mk and test recovery image.
Change-Id: Id0fb2d4e3977ab5ddd31e71f9535470cab70e41b
|
|
Get rid of pixel offset variables, and use makefile variables in
BoardConfigs.
Cherry picked from commit 81a8e4cab2a20fd1b1a4716563d4d2586bd1e1de
Bug: 37779982
Test: Verified vr ui has same behavior.
Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
|
|
A version of screen ui with specific adjustments for vr device
compatibility.
Cherry picked from commit a44dba7f4e7296077f65fd571232e8a61aed9418
Bug: 37779982
Test: "adb reboot recovery" to view
Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
|
|
Move away from taking int* for the Y-offset. Change it to int and return
the offset instead.
Test: Check the recovery menu and 'Wipe data' menu.
Change-Id: Ib15e070a0d576a0f8f66f35605cb8479e7071f26
|
|
Test: mmma bootable/recovery
Change-Id: I66e328614423488a4027d7878f4569fbf3a3721e
|
|
All cosmetic changes about indentation reformatting in this CL.
Test: mmma bootable/recovery
Change-Id: I4539e6244697d1f356b7eb10b961b52d7db561f7
|
|
Get rid of pixel offset variables, and use makefile variables in
BoardConfigs.
Bug: 37779982
Test: Verified vr ui has same behavior.
Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
(cherry picked from commit 81a8e4cab2a20fd1b1a4716563d4d2586bd1e1de)
|
|
Get rid of pixel offset variables, and use makefile variables in
BoardConfigs.
Bug: 37779982
Test: Verified vr ui has same behavior.
Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
|
|
Instead of defining device-specific UI class, this CL allows using
Makefile variables to specify margin values directly.
Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and
TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will
default to zero.
Bug: 62732748
Test: Specify the height and width and check recovery texts.
Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
(cherry picked from commit a92d8fb45676566a56d7c27d2e8fb644523adc94)
|
|
For round screen or screens with rounded corners, we don't want to show
texts within the margin which could otherwise be invisible.
Move the density computation to ScreenRecoveryUI ctor so that the value
can be used earlier.
Note that this is similar to the existing stuff in wear UI (outer_width,
outer_height). This CL gets ScreenRecoveryUI and WearRecoveryUI one-step
closer.
Bug: 62732748
Test: Setting and not setting margin_{width,height}_ on angler. Check the
recovery texts (recovery menu as well as 'View recovery logs').
Change-Id: Ibf6238c9cc8949a42ed8a410e1c09d55b0b5a151
(cherry picked from commit 87f4650874346f1d0238e70b148a31cea5e19a2e)
|
|
Instead of defining device-specific UI class, this CL allows using
Makefile variables to specify margin values directly.
Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and
TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will
default to zero.
Bug: 62732748
Test: Specify the height and width and check recovery texts.
Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
(cherry picked from commit a92d8fb45676566a56d7c27d2e8fb644523adc94)
|
|
Instead of defining device-specific UI class, this CL allows using
Makefile variables to specify margin values directly.
Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and
TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will
default to zero.
Bug: 62732748
Test: Specify the height and width and check recovery texts.
Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
|
|
We already have outer_width and outer_height in wear UI, and x_offset
and y_offset in VR UI. This CL adds margin_width_ and margin_height_ to
their base class (ScreenRecoveryUI) to shorten the gap. This will be in
general useful for round or round-cornered screens.
Move the density computation to ScreenRecoveryUI ctor so that the value
can be used earlier.
Bug: 62732748
Test: Setting and not setting margin_{width,height}_ on angler. Check the
recovery texts (recovery menu as well as 'View recovery logs').
Change-Id: Ibf6238c9cc8949a42ed8a410e1c09d55b0b5a151
(cherry picked from commit 87f4650874346f1d0238e70b148a31cea5e19a2e)
|
|
For round screen or screens with rounded corners, we don't want to show
texts within the margin which could otherwise be invisible.
Move the density computation to ScreenRecoveryUI ctor so that the value
can be used earlier.
Note that this is similar to the existing stuff in wear UI (outer_width,
outer_height). This CL gets ScreenRecoveryUI and WearRecoveryUI one-step
closer.
Bug: 62732748
Test: Setting and not setting margin_{width,height}_ on angler. Check the
recovery texts (recovery menu as well as 'View recovery logs').
Change-Id: Ibf6238c9cc8949a42ed8a410e1c09d55b0b5a151
|
|
A version of screen ui with specific adjustments for vr device
compatibility.
(cherrypick of a44dba7f4e7296077f65fd571232e8a61aed9418 to AOSP)
Bug: 37779982
Test: "adb reboot recovery" to view
Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
|
|
A version of screen ui with specific adjustments for vr device
compatibility.
Bug: 37779982
Test: "adb reboot recovery" to view
Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
|
|
This functions do not change class variables
Would be good to mark them as const, so
class variables are not changed by coincidence
Change-Id: Iea34f6d26dbd1bde813035160e07ff2a681989e6
|
|
For libminui static and shared libraries.
Test: build
Change-Id: Ib30dc5e2ef4a3c8b3ca3a0cec68cb65e229a0c16
|
|
UI text is broken (doesn't show any text during FDR) due to commit
d530449e54bd327e9c26209ffa0490c6508afe6c, which reordered the calls to
RecoveryUI::SetLocale() and RecoveryUI::Init().
Because Init() uses the locale info to load the localized texts (from
images), the locale must be set prior to that via SetLocale(). This CL
refactors Init() to take the locale parameter, and removes the odd
SetLocale() API.
Bug: 34029338
Test: 'Run graphics test' under recovery.
Change-Id: I620394a3d4e3705e9af5a1f6299285d143ae1b01
|
|
This allows recovery to work on devices without screen.
The stub recovery UI does nothing except print to stdout.
Test: write 'recovery\n--wipe_data\n--reason=wipe_data_from_ota\n'
to misc and boot to recovery on a device without screen.
Bug: 33175036
Change-Id: Icde698aa2e2e29f4b3d0532dfd3c6a939ac2bc63
|
|
Copy pasta is never as delicious as ones hopes.
Also fix the Pike not rendering recovery bug.
Change-Id: I903da7da436e3347a22ff51633e8a0f28fea2c46
|
|
Add support for landscape layouts to the existing portrait support.
Bug: http://b/29418855
Test: tested manually with "Run graphics test" on flounder/fugu/ryu.
Change-Id: Ib4a62bf5f2b8a1cef6028a01f05145104660560a
|
|
Add a new command "--security" to boot commands. If this command is
observed as part of BCB, choose a different background text picture
for installing stage in recovery UI. As a result, users will see
"installing security update" instead of "installing system update"
when applying a security update package.
Bug: 27837319
Change-Id: I2e2253a124993ecc24804fa1ee0b918ac96837c5
|
|
* Use new animation.
* Use new non-holo progress bars.
* Use recommended spacing for recovery UI.
Bug: http://b/26548285
Change-Id: I8411e89d6a6a9ce638b8645e19e5082d0d968cee
|
|
Switch to a Wear-like intro/loop system. We don't have an intro yet,
but hopefully this will let Wear delete more code when they move to N.
Unlike them, we don't hard-code the number of frames: we just look to
see what we have available. We do hard-code the fps though.
Also add a graphics test mode so you can see a demo of the UI components
without having to actually apply an OTA.
Also fix a bug where default locale is null rather than en-US: it's
more useful to show _some_ text if we don't have a locale (which should
only be during development anyway).
Bug: http://b/26548285
Change-Id: I63422e3fef3c41109f924d96fb5ded0b3ae7815d
|
|
The only difference from SetColor in ScreenRecoveryUI is the that the
LOG messages have slightly different colors. That's not enough to
warrant a duplicate function. So this patch removes SetColor and uses
the parent class version.
This patch also moves the DrawTextLine* functions into ScreenRecoveryUI
since they're mostly the same. It also moves char_width and char_height
into the class instead of keeping them as static variables.
Bug: 27407422
Change-Id: I30428c9433baab8410cf710a01c9b1c44c217bf1
|
|
The function that modifies rtl_locale exists only in the base class,
and so the variable should not have a duplicate in the derived class,
otherwise there may be incosistent values when it is read by the derived
class (the thinking being that invoking the function will modify the
base class version of the variable, and not the derived class version).
Remove the updateMutex variable, and instead re-use the one in the base
class.
Also remove LoadBitmap from WearUI since it is identical to the one in
ScreenRecoveryUI.
Bug: 27407422
Change-Id: Idd823fa93dfa16d7b2c9c7160f8d0c2559d28731
|
|
This reverts commit 1c7b2230d8aac9f064f68c48b6aa26aca000cc9d.
This change can lead to the derived class indirectly (and incorrectly) calling some functions from the base class, which can lead to unpredictable behavior.
Bug: 27407422
Change-Id: I126a7489b0787dc195e942e2ceea6769de20d70c
|
|
This patch performs the following modifications:
- Remove setBackground function, and currentIcon member variable.
- Remove common Progress*, Redraw and EndMenu functions.
Bug: 27407422
Change-Id: Ic3c0e16b67941484c3bc1d04c9b61288e8896808
Signed-off-by: Prashant Malani <pmalani@google.com>
|
|
We allow vendor-specific icon installing image but have defined private
animation_fps that can't be overridden. This CL changes the image
generator to optionally embed FPS (otherwise use the default value of
20) into the generated image.
For wear devices, they are using individual images instead of the
interlaced one. Change the animation_fps from private to protected so
that it can be customized.
Bug: 26009230
Change-Id: I9fbf64ec717029d4c54f72316f6cb079e8dbfb5e
|
|
Although stdout and stderr are both redirected to log file with no
buffering, we are seeing some outputs are mixed in random order.
This is because ui_print commands from the updater are passed to the
recovery binary via a pipe, which may interleave with other outputs
that go to stderr directly.
In recovery, adding ui::PrintOnScreenOnly() function to handle
ui_print command, which skips printing to stdout. Meanwhile, updater
prints the contents to stderr in addition to piping them to recovery.
Change-Id: Idda93ea940d2e23a0276bb8ead4aa70a3cb97700
|
|
This makes it easier to go back and forth without losing current output.
Also make the display more like regular more(1).
Bug: http://b/20834540
Change-Id: Icc5703e9c8a378cc7072d8ebb79e34451267ee1b
(cherry picked from commit c049163234003ef463bca018920622bc8269c69b)
|
|
This makes it easier to go back and forth without losing current output.
Also make the display more like regular more(1).
Bug: http://b/20834540
Change-Id: Icc5703e9c8a378cc7072d8ebb79e34451267ee1b
|
|
gr_surface was causing confusion for no good reason.
Change-Id: If7120187f9a00dd16297877fc49352185a4d4ea6
|
|
This makes it easier for us to deal with arbitrary information at the
top, and means that headers added by specific commands don't overwrite
the default ones.
Add the fingerprint back, but broken up so it fits even on sprout's
display.
Change-Id: Id71da79ab1aa455a611d72756a3100a97ceb4c1c
|
|
Change-Id: I76a042432aede08ceaf250319cf5eeb25d601150
|
|
Most importantly, this one no longer skips lines because of wrapping.
Change-Id: Ic1c1944682ab8cbf3d542418ee86d29819173fc9
|
|
Currently fugu has a custom subclass to handle this. The default code
supports devices with trackballs but not all shipping Nexus devices?
That's just silly.
Change-Id: Id2779c91284899a26b4bb1af41e7033aa889df10
|
|
This fixes the N9 performance problem.
Change-Id: I00c10d4162ff266a6243285e5a5e768217f6f799
|
|
The original attempt missed the fact that Print is a member function,
so the first argument is the implicit 'this'.
Change-Id: I963b668c5432804c767f0a2e3ef7dea5978a1218
|
|
Dynamically allocate the text and menu arrays instead.
Change-Id: Idbfc3fe4e4b50db4fee62ac2b6a7323cad369749
|
|
Return to the recovery to the holo appearance.
Bug: 15424396
Change-Id: Id4d3f23e0a6251a12aa42f3793cff347f38b4243
|
|
Since we don't have quantum assets for recovery yet, go back to the
holo appearance (dark background, blue glowing progress bar) for
lmp-preview.
Change-Id: Id4d3f23e0a6251a12aa42f3793cff347f38b4243
|
|
Provide different recovery UI resources for different display
densities. Right now only the text images and the progress bars are
rescaled; the main icon will get scaled when it's updated for QP.
Lightly quantum-ify the rest of the recovery interface. (Light
background, progress bars, etc.)
Change-Id: Ia639c4ce8534b01bc843524efbc4b040c1cf38b3
|
|
Reduce the number of copies of libpng boilerplate. Rename
res_create_* functions to be more clear. Make explicit the use of the
framebuffer pixel format for images, and handle more combinations of
input and output (eg, loading a grayscale image for display rather
than use as a text alpha channel).
Change-Id: I3d41c800a8f4c22b2f0167967ce6ee4d6b2b8846
|
|
Instead of one 'base' installing image and a number of overlay images
that are drawn on top of it, we represent the installing animation
with one PNG that contains all the animation frames, interlaced by
row. The PNG is expected to have a text chunk with the keyword
'Frames' and a value that's the number of frames (as an ascii
string). This representation provides better compression, removes the
need to subclass ScreenRecoveryUI just to change the position of the
overlay or number of frames, and doesn't require gr_blit() to support
an alpha channel.
We also remove the 'indeterminate' progress bar used when wiping data
and/or cache. The main animation serves the same purpose (showing
that the device is still alive); the spinning progress bar has been
redundant for a while.
This changes the default recovery animation to include the
antenna-wiggling and gear-turning that's used in the Nexus 5 recovery
animation.
Change-Id: I51930a76035ac09969a25472f4e572b289418729
Conflicts:
screen_ui.cpp
screen_ui.h
|
|
Instead of one 'base' installing image and a number of overlay images
that are drawn on top of it, we represent the installing animation
with one PNG that contains all the animation frames, interlaced by
row. The PNG is expected to have a text chunk with the keyword
'Frames' and a value that's the number of frames (as an ascii
string). This representation provides better compression, removes the
need to subclass ScreenRecoveryUI just to change the position of the
overlay or number of frames, and doesn't require gr_blit() to support
an alpha channel.
We also remove the 'indeterminate' progress bar used when wiping data
and/or cache. The main animation serves the same purpose (showing
that the device is still alive); the spinning progress bar has been
redundant for a while.
This changes the default recovery animation to include the
antenna-wiggling and gear-turning that's used in the Nexus 5 recovery
animation.
Change-Id: I51930a76035ac09969a25472f4e572b289418729
|
|
In order to support multi-stage recovery packages, we add the
set_stage() and get_stage() functions, which store a short string
somewhere it can be accessed across invocations of recovery. We also
add reboot_now() which updater can invoke to immediately reboot the
device, without doing normal recovery cleanup. (It can also choose
whether to boot off the boot or recovery partition.)
If the stage string is of the form "#/#", recovery's UI will be
augmented with a simple indicator of what stage you're in, so it
doesn't look like a reboot loop.
Change-Id: I62f7ff0bc802b549c9bcf3cc154a6bad99f94603
|
|
update image.
b/10952479
Change-Id: I59bb834f271f702fb529054dab7926b816fa35cc
|
|
Recovery changes:
- add a method to the UI class that is called when a key is held down
long enough to be a "long press" (but before it is released).
Device-specific subclasses can override this to indicate a long
press.
- do color selection for ScreenRecoveryUI's menu-and-log drawing
function. Subclasses can override this to customize the colors they
use for various elements.
- Include the value of ro.build.display.id in the menu headers, so you
can see on the screen what version of recovery you are running.
Change-Id: I426a6daf892b9011638e2035aebfa2831d4f596d
|
|
Get rid of the notion of a font's "ascent"; the reference point for
drawing is the top-left corner of the character box rather than the
baseline. Add some more space between the menu entries and make the
highlight bar around the text.
Replace the default font.png with two images; the build system will
include one or the other based on the resolutions of the device.
Restore the original compiled-in bitmap font, to fall back on when
font.png can't be found (eg, in the charger binary).
Add support for bold text (when a font.png image is used).
Change-Id: I6d211a486a3636f20208502b1cd2aeae8b9f5b02
|
|
Add images of text for all locales we support. Make the progress bar
fill the correct way for RTL languages. (Flip the direction the
spinner turns, too, just for good measure.)
Bug: 7064142
Change-Id: I5dddb26e02ee5275c57c4dc4a03c6d68432ac7ba
|
|
Add images of text for all locales we support. Make the progress bar
fill the correct way for RTL languages. (Flip the direction the
spinner turns, too, just for good measure.)
Bug: 7064142
Change-Id: I5dddb26e02ee5275c57c4dc4a03c6d68432ac7ba
|
|
- recovery takes a --locale argument, which will be passed by the main
system
- the locale is saved in cache, in case the --locale argument is
missing (eg, when recovery is started from fastboot)
- we include images that have prerendered text for many locales
- we split the background states into four (installing update,
erasing, no command, error) so that appropriate text can be shown.
Change-Id: I731b8108e83d5ccc09a4aacfc1dbf7e86b397aaf
|
|
Move the key for handling keys from ScreenRecoveryUI to RecoveryUI, so
it can be used by devices without screens. Remove the UIParameters
struct and replace it with some new member variables in
ScreenRecoveryUI.
Change-Id: I70094ecbc4acbf76ce44d5b5ec2036c36bdc3414
|
|
Move the key for handling keys from ScreenRecoveryUI to RecoveryUI, so
it can be used by devices without screens. Remove the UIParameters
struct and replace it with some new member variables in
ScreenRecoveryUI.
Change-Id: I4c0e659edcbedc0b9e86ed261ae4dbb3c6097414
|
|
Replace the device-specific functions with a class. Move some of the
key handling (for log visibility toggling and rebooting) into the UI
class. Fix up the key handling so there is less crosstalk between the
immediate keys and the queued keys (an increasing annoyance on
button-limited devices).
Change-Id: I698f6fd21c67a1e55429312a0484b6c393cad46f
|
|
Move all the functions in ui.c to be members of a ScreenRecoveryUI
class, which is a subclass of an abstract RecoveryUI class. Recovery
then creates a global singleton instance of this class and then invoke
the methods to drive the UI. We use this to allow substitution of a
different RecoveryUI implementation for devices with radically
different form factors (eg, that don't have a screen).
Change-Id: I76bdd34eca506149f4cc07685df6a4890473f3d9
|
|
Replace the device-specific functions with a class. Move some of the
key handling (for log visibility toggling and rebooting) into the UI
class. Fix up the key handling so there is less crosstalk between the
immediate keys and the queued keys (an increasing annoyance on
button-limited devices).
Change-Id: I8bdea6505da7974631bf3d9ac3ee308f8c0f76e1
|
|
Move all the functions in ui.c to be members of a ScreenRecoveryUI
class, which is a subclass of an abstract RecoveryUI class. Recovery
then creates a global singleton instance of this class and then invoke
the methods to drive the UI. We use this to allow substitution of a
different RecoveryUI implementation for devices with radically
different form factors (eg, that don't have a screen).
Change-Id: I7fd8b2949d0db5a3f47c52978bca183966c86f33
|
