| Commit message (Collapse) | Author | Files | Lines |
|---|
|
The matching change to build system now writes these values as build
properties for recovery image. This allows us dropping the dependency on
Android.mk (as well as having more flexibility to do UI customization).
Also rename a few constant names, as the naming doesn't fully follow the
style guide (which reads "whose value is fixed for the duration of the
program").
Bug: 110380063
Test: Build and flash recovery image on taimen, which uses custom margin
height. Check the UI and choose `Run graphics test`.
Change-Id: I2c50326123639cb36022f51b62cdeed925d77ba7
|
|
Normally calling a UI method will block
indefinitely until the UI is actually
used. This creates a method to interrupt
the UI, causing waitKey to return -2. This
in turn, will cause ShowMenu to return -2.
This allows switching between recovery and
fastbootd via usb commands.
Test: adb shell /data/nativetest64/recovery_unit_test/recovery_unit_test
Bug: 78793464
Change-Id: I4c6c9aa18d79070877841a5c9818acf723fa6096
|
|
gr_init() does general initialization works, in addition to loading font
file. InitTextParams() handles text related works.
Also check the font initialization result before using, as gr_init()
would ignore font initialization failures.
Test: recovery_unit_test on marlin.
Test: Boot into recovery. Run graphics test.
Change-Id: I12da22dfe8d13448cfbc83dbc51cd96f23c2deee
|
|
ScreenRecoveryUI calls gr_init() during Init(), and should release any
allocated resource upon destructing. It's a no-op to call gr_exit() if
gr_init() was not called or didn't finish successfully.
Test: recovery_unit_test on marlin.
Test: Boot into recovery. Run graphics test.
Change-Id: Ib9632170174cdacd51d382f23c8daf6a9bc59f7a
|
|
The threads in RecoveryUI only get initialized if their Init()s finish
successfully.
Test: recovery_unit_test on marlin.
Change-Id: Ic4b62300a3cbd47887d9f4a90dc26f8a7deab616
|
|
Change pthread usage to std::mutex,
lock_guard, unique_lock, thread, or
condition_variable as appropriate.
Test: Recovery works, recovery_component_test pass
Bug: 78793464
Change-Id: Ibf0b1bbedcf0b6e32fc4ee6aaadd17f21b4d7077
|
|
Test: Build and boot into recovery on walleye. Check the long press
detection; `Run graphics test`.
Change-Id: Ic3e9b0652fc3ff6fb3ad118df5ebb9bb4abda2cd
|
|
Add the ability to change the contents of
the title lines, displayed at the top of
the screen. Once set, the same lines are
displayed for all menus until changed again.
Test: Recovery works
Bug: 78793464
Change-Id: I7ef5594b0d76dbbd2e01ad7508863af1270b2a2a
|
|
Test: mmma -j bootable/recovery
Test: Build and boot into recovery, w/ and w/o enabling quiescent mode
respectively.
Change-Id: I5d9bb945a6c3c9a3b96199fa0c8071a2f91339a0
|
|
The last character at EOL is cut when showing the prompt-for-data-wipe
message on angler. Address the issue by keeping symmetrical margins
based on the given offset.
Test: Trigger prompt-and-wipe-data menu. No cutout character at EOL.
Change-Id: Id6e8dc7815bf681435bcaf13e7bdd09cf870d95f
|
|
The CL in [1] moved android.os.RecoverySystem to send the locale
argument in well-formed BCP 47 language tags (e.g. "en-US" instead of
"en_US"), with the matching changes to recovery code in [2]. However,
the one in ScreenRecoveryUI::SetLocale() was missed, which broke RTL
locale detection when using new format.
[1] commit 38715228 in platform/frameworks/base
[2] commit 2078b22e in platform/bootable/recovery
Test: Set the locale to "ar-EG". `Run graphics test` under recovery.
Check the progress bar.
Test: Run recovery_unit_test on marlin.
Change-Id: I7c7f5e0725bfb096109c7192c19f3f008e8e47e3
|
|
In order to support that, this CL adds Paths::set_resource_dir() to
override the default resource dir ("/res/images/") that's only available
under recovery. Note that since there're external modules depending on
libminui, it adds a separate function of res_set_resource_dir(), instead
of requiring the dependency on libotautil for everyone.
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin.
Change-Id: I0a7dcf4476808bea9e634eaffc9676f6cbaf92b7
|
|
ScreenRecoveryUI already has the info in locale_.
Also when showing "Current locale: X/Y" on screen, use 1-based index for
X, so that we have 1 <= X <= Y.
Test: Build anf flash recovery image on aosp_bullhead-userdebug. Choose
`Run locale test` from UI.
Change-Id: I5dd4de82e63890ddf755f4e23cd2290ad5d50ece
|
|
This removes some reliance on the global
locale and ui variables.
Test: Recovery works
Bug: 78793464
Change-Id: I78f1a2b321f5d50aa58b10735a73ae137283353a
|
|
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin.
Test: Build and boot into recovery image on angler. Check the UI that
shows menu ('View recovery log', 'Wipe data', 'Run locale test').
Test: Start recovery with '--prompt_and_wipe_data'. Check the UI.
Change-Id: If8a4209e0bb4ca64f719f9f9465d3b3589a69cdc
|
|
Since we instantiate a Menu object each time for a given set of
header/items, we don't have a use case of re-populating an existing Menu
with different data (which is what Menu::Start() does).
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin.
Test: Build and boot into recovery image on angler. Check the UI.
Change-Id: Iaa2ba9d406ebd74c015e43198c17c5335b38df53
|
|
Test: mmma -j bootable/recovery
Test: Build and boot into recovery image on angler. Check the UI.
Test: Repeat the same test on devices using wearable UI.
Change-Id: I1a67ff4ae8de4d7a8dc66326cf07f95c89e95152
|
|
Remove the use of fopen_path() in screen_ui.cpp, as this is the only
place that requires the dependency on common.h. The mounting work should
be done by the caller.
Also change the parameter in RecoveryUI::ShowFile() from const char* to
const std::string&.
Test: mmma -j bootable/recovery
Test: Build and boot into recovery image on angler. Choose 'View
recovery logs'.
Change-Id: I8e63f14a8e2b12b856e5a92476e4226cd6ea39fb
|
|
From caller's PoV, RecoveryUI::{Start,Select,End}Menu should always be
used together, i.e. to show a menu and get user's selection. This CL
provides ShowMenu() as one-stop service (which is based on
get_menu_selection() from recovery.cpp).
Also move RecoveryUI::{Start,Select,End}Menu into ScreenRecoveryUI, with
a dropped access level from public to protected.
Due to the dependency on recovery / librecovery refactoring, will add
testcases in follow-up CLs.
Test: Build and boot into recovery image. Check the menus (main menu,
'View recovery logs', 'Wipe data/factory reset').
Change-Id: Ie17aa78144871a12affd6f9075e045f76608a0ba
|
|
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI
and WearRecoveryUI. This helps us to support text icons as menu in the
future.
Bug: 74397117
Test: Check the menu under recovery on bullhead and a wear device.
Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b
Merged-In: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b
|
|
Change drawing of horizontal bars.
Implement image and background drawing.
Bug: 65556996
Test: Viewed graphics test
Change-Id: I68ddd997123607dbebf972af5a455ce8ef0c7075
|
|
Small fix to position stage markers above screen margin.
Bug: 65556996
Test: Viewed graphics test
Change-Id: Idb4a56b06b8ec4e6653b3d3f3a446fa491f5ccb7
|
|
Add a new option "Run locale test" to check the background text
images (i.e. texts for "erasing", "error", "no_command" and "installing"
with different locales.)
Use volume up/down button to cycle through all the locales embedded in
the png file, and power button to go back to recovery main menu.
Test: Run locale test with bullhead.
Change-Id: Ib16e119f372110cdb5e611ef497b0f9b9b418f51
|
|
Localized texts only make sense on devices with screens.
Test: Run fake OTA on angler; check the on-screen texts.
Change-Id: I3a644294c8b1f2056cfb78b2d61a598b8ddf2acf
|
|
By grouping similar kinds together, in an order of types, constants,
ctor/dtor, all other methods and data members.
Also rename ScreenRecoveryUI::density_ to ScreenRecoveryUI::kDensity to
align with others.
Test: mmma bootable/recovery
Change-Id: I1ba2d15c05ba7be8c39762f3d9dadf1fb2130de4
|
|
After the cleanup to WearRecoveryUI, text_top_ now always equals to
((text_row_ + 1) % text_rows_).
Test: Check the recovery UI and 'View recovery logs'.
Change-Id: I69a7f377bbd990db2194f9d3efae257c323c06a8
|
|
Prior to this CL, menu_ is allocated with a fixed length of text_rows_.
However, because we support scrollable menu in wear_ui, there might be
more menu entries than text_rows_, which would lead to out-of-bounds
array access. This CL addresses the issue by switching to std::vector.
Bug: 65416558
Test: Run 'View recovery logs' on angler.
Test: Set large margin height that leaves text_rows less than 21. Then
run 'View recovery logs' with 21 menu entries.
Change-Id: I5d4e3a0a097039e1104eda7d494c6269053dc894
(cherry picked from commit e15d7a5104978cd8399501636aec0df9c1a4823c)
|
|
Prior to this CL, menu_ is allocated with a fixed length of text_rows_.
However, because we support scrollable menu in wear_ui, there might be
more menu entries than text_rows_, which would lead to out-of-bounds
array access. This CL addresses the issue by switching to std::vector.
Bug: 65416558
Test: Run 'View recovery logs' on angler.
Test: Set large margin height that leaves text_rows less than 21. Then
run 'View recovery logs' with 21 menu entries.
Change-Id: I5d4e3a0a097039e1104eda7d494c6269053dc894
|
|
ScreenRecoveryUI::DrawWrappedTextLines() should be called with
kMarginWidth only. Because it's using a line limit of text_cols_,
which is unaware of kMenuIdent.
Bug: 64293520
Test: No missing char with long header text.
Change-Id: Ib4d08de2c56473a483ff9964eb6cec31f8a74c9a
(cherry picked from commit 13aa4a902ba2fa304fc9fe826f797a4e0e2182b7)
|
|
ScreenRecoveryUI::DrawWrappedTextLines() should be called with
kMarginWidth only. Because it's using a line limit of text_cols_,
which is unaware of kMenuIdent.
Bug: 64293520
Test: No missing char with long header text.
Change-Id: Ib4d08de2c56473a483ff9964eb6cec31f8a74c9a
|
|
This CL adds ScreenRecoveryUI::DrawWrappedTextLines() to better handle
long menu header texts. It does a word wrap at spaces, if available.
This avoids fixed-length menu headers being truncated on small screens.
Bug: 64293520
Test: On bullhead, boot into recovery with --prompt_and_wipe_data, and
check the prompt texts.
Change-Id: Ia22746583516dd230567a267584aca558429395e
(cherry picked from commit 2bbc6d642d1fbfb007905d95b629fe5f833b2a1b)
|
|
This CL adds ScreenRecoveryUI::DrawWrappedTextLines() to better handle
long menu header texts. It does a word wrap at spaces, if available.
This avoids fixed-length menu headers being truncated on small screens.
Bug: 64293520
Test: On bullhead, boot into recovery with --prompt_and_wipe_data, and
check the prompt texts.
Change-Id: Ia22746583516dd230567a267584aca558429395e
|
|
With the following Makefile variables, we can reduce the work of writing
(copy/pasting) device-specific WearRecoveryUI classes.
The list of Makefile variables (the ones useful for Wear devices):
- TARGET_RECOVERY_UI_MARGIN_HEIGHT (default: 0)
- TARGET_RECOVERY_UI_MARGIN_WIDTH (default: 0)
Specify the margin space that we don't want to display texts. They
replace the former outer_width and outer_height.
- TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD (default: 50)
- TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD (default: 90)
Specify the sensitivity of recognizing a swipe. Devices give absolute
positions, so for some devices we need to adjust the thresholds.
- TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE
Specify the progress bar vertical position, which should be adjusted
to the actual height of a device. It replaces the former
progress_bar_y.
- TARGET_RECOVERY_UI_ANIMATION_FPS (default: 30)
Specify the animation FPS if using device-specific animation images.
It replaces the former animation_fps.
Devices can specify "TARGET_RECOVERY_UI_LIB := librecovery_ui_wear",
with optionally defined Makefile vars above, in BoardConfig.mk to
customize their WearRecoveryUI.
Also remove the obsolete wear_touch.{cpp,h}, which has been merged into
ui.cpp in commit 5f8dd9951d986b65d98d6a9ea38003427e9e46df.
Bug: 64307776
Test: Change the device BoardConfig.mk and test recovery image.
Change-Id: Id0fb2d4e3977ab5ddd31e71f9535470cab70e41b
(cherry picked from commit 0470ceea381775b09eee931858c3320be88cc637)
|
|
With the following Makefile variables, we can reduce the work of writing
(copy/pasting) device-specific WearRecoveryUI classes.
The list of Makefile variables (the ones useful for Wear devices):
- TARGET_RECOVERY_UI_MARGIN_HEIGHT (default: 0)
- TARGET_RECOVERY_UI_MARGIN_WIDTH (default: 0)
Specify the margin space that we don't want to display texts. They
replace the former outer_width and outer_height.
- TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD (default: 50)
- TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD (default: 90)
Specify the sensitivity of recognizing a swipe. Devices give absolute
positions, so for some devices we need to adjust the thresholds.
- TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE
Specify the progress bar vertical position, which should be adjusted
to the actual height of a device. It replaces the former
progress_bar_y.
- TARGET_RECOVERY_UI_ANIMATION_FPS (default: 30)
Specify the animation FPS if using device-specific animation images.
It replaces the former animation_fps.
Devices can specify "TARGET_RECOVERY_UI_LIB := librecovery_ui_wear",
with optionally defined Makefile vars above, in BoardConfig.mk to
customize their WearRecoveryUI.
Also remove the obsolete wear_touch.{cpp,h}, which has been merged into
ui.cpp in commit 5f8dd9951d986b65d98d6a9ea38003427e9e46df.
Bug: 64307776
Test: Change the device BoardConfig.mk and test recovery image.
Change-Id: Id0fb2d4e3977ab5ddd31e71f9535470cab70e41b
|
|
This is a regression when adding support for margin space in commit
171b4c4c.
We're losing one char when showing long log lines. Because text_ is
aware of kMarginWidth, but not the the added indent (TEXT_INDENT).
Test: 'View recovery logs' on angler, with no missing character.
Change-Id: I284d54681d603e85e69d8e9c25173b1437a704df
|
|
Get rid of pixel offset variables, and use makefile variables in
BoardConfigs.
Cherry picked from commit 81a8e4cab2a20fd1b1a4716563d4d2586bd1e1de
Bug: 37779982
Test: Verified vr ui has same behavior.
Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
|
|
A version of screen ui with specific adjustments for vr device
compatibility.
Cherry picked from commit a44dba7f4e7296077f65fd571232e8a61aed9418
Bug: 37779982
Test: "adb reboot recovery" to view
Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
|
|
Move away from taking int* for the Y-offset. Change it to int and return
the offset instead.
Test: Check the recovery menu and 'Wipe data' menu.
Change-Id: Ib15e070a0d576a0f8f66f35605cb8479e7071f26
|
|
We're not actually following the gaps as in the comments. For example,
Nexus 6P is supposed to use 220dp and 194dp gaps (top and bottom
respectively), but the actual numbers are 185dp and 194dp. Because the
animation icon and text sizes don't match the ones claimed (animation:
expected 200dp or 700px, actual 800px; text: claimed 14sp, actual 76px).
The top gap changes (shrinks) as we compute the baselines bottom-up.
This CL switches to using computed gaps: the major UI elements always
stay vertically centered, with identical top and bottom gaps.
Bug: 63093285
Test: 'Run graphics test' on angler/volantis/fugu/ryu.
Change-Id: I3cadbb34f728cf034afa47ac02a6deba8cb6b4e7
(cherry picked from commit 3250f723602244cd3a87327a14755dcde2f4e5dc)
|
|
We're not actually following the gaps as in the comments. For example,
Nexus 6P is supposed to use 220dp and 194dp gaps (top and bottom
respectively), but the actual numbers are 185dp and 194dp. Because the
animation icon and text sizes don't match the ones claimed (animation:
expected 200dp or 700px, actual 800px; text: claimed 14sp, actual 76px).
The top gap changes (shrinks) as we compute the baselines bottom-up.
This CL switches to using computed gaps: the major UI elements always
stay vertically centered, with identical top and bottom gaps.
Bug: 63093285
Test: 'Run graphics test' on angler/volantis/fugu/ryu.
Change-Id: I3cadbb34f728cf034afa47ac02a6deba8cb6b4e7
|
|
Test: mmma bootable/recovery
Change-Id: I66e328614423488a4027d7878f4569fbf3a3721e
|
|
All cosmetic changes about indentation reformatting in this CL.
Test: mmma bootable/recovery
Change-Id: I4539e6244697d1f356b7eb10b961b52d7db561f7
|
|
Get rid of pixel offset variables, and use makefile variables in
BoardConfigs.
Bug: 37779982
Test: Verified vr ui has same behavior.
Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
(cherry picked from commit 81a8e4cab2a20fd1b1a4716563d4d2586bd1e1de)
|
|
Get rid of pixel offset variables, and use makefile variables in
BoardConfigs.
Bug: 37779982
Test: Verified vr ui has same behavior.
Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
|
|
Instead of defining device-specific UI class, this CL allows using
Makefile variables to specify margin values directly.
Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and
TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will
default to zero.
Bug: 62732748
Test: Specify the height and width and check recovery texts.
Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
(cherry picked from commit a92d8fb45676566a56d7c27d2e8fb644523adc94)
|
|
For round screen or screens with rounded corners, we don't want to show
texts within the margin which could otherwise be invisible.
Move the density computation to ScreenRecoveryUI ctor so that the value
can be used earlier.
Note that this is similar to the existing stuff in wear UI (outer_width,
outer_height). This CL gets ScreenRecoveryUI and WearRecoveryUI one-step
closer.
Bug: 62732748
Test: Setting and not setting margin_{width,height}_ on angler. Check the
recovery texts (recovery menu as well as 'View recovery logs').
Change-Id: Ibf6238c9cc8949a42ed8a410e1c09d55b0b5a151
(cherry picked from commit 87f4650874346f1d0238e70b148a31cea5e19a2e)
|
|
Instead of defining device-specific UI class, this CL allows using
Makefile variables to specify margin values directly.
Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and
TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will
default to zero.
Bug: 62732748
Test: Specify the height and width and check recovery texts.
Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
(cherry picked from commit a92d8fb45676566a56d7c27d2e8fb644523adc94)
|
|
Instead of defining device-specific UI class, this CL allows using
Makefile variables to specify margin values directly.
Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and
TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will
default to zero.
Bug: 62732748
Test: Specify the height and width and check recovery texts.
Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
|
|
We already have outer_width and outer_height in wear UI, and x_offset
and y_offset in VR UI. This CL adds margin_width_ and margin_height_ to
their base class (ScreenRecoveryUI) to shorten the gap. This will be in
general useful for round or round-cornered screens.
Move the density computation to ScreenRecoveryUI ctor so that the value
can be used earlier.
Bug: 62732748
Test: Setting and not setting margin_{width,height}_ on angler. Check the
recovery texts (recovery menu as well as 'View recovery logs').
Change-Id: Ibf6238c9cc8949a42ed8a410e1c09d55b0b5a151
(cherry picked from commit 87f4650874346f1d0238e70b148a31cea5e19a2e)
|
|
For round screen or screens with rounded corners, we don't want to show
texts within the margin which could otherwise be invisible.
Move the density computation to ScreenRecoveryUI ctor so that the value
can be used earlier.
Note that this is similar to the existing stuff in wear UI (outer_width,
outer_height). This CL gets ScreenRecoveryUI and WearRecoveryUI one-step
closer.
Bug: 62732748
Test: Setting and not setting margin_{width,height}_ on angler. Check the
recovery texts (recovery menu as well as 'View recovery logs').
Change-Id: Ibf6238c9cc8949a42ed8a410e1c09d55b0b5a151
|
|
A version of screen ui with specific adjustments for vr device
compatibility.
(cherrypick of a44dba7f4e7296077f65fd571232e8a61aed9418 to AOSP)
Bug: 37779982
Test: "adb reboot recovery" to view
Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
|
|
A version of screen ui with specific adjustments for vr device
compatibility.
Bug: 37779982
Test: "adb reboot recovery" to view
Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
|
|
This functions do not change class variables
Would be good to mark them as const, so
class variables are not changed by coincidence
Change-Id: Iea34f6d26dbd1bde813035160e07ff2a681989e6
|
|
UI text is broken (doesn't show any text during FDR) due to commit
d530449e54bd327e9c26209ffa0490c6508afe6c, which reordered the calls to
RecoveryUI::SetLocale() and RecoveryUI::Init().
Because Init() uses the locale info to load the localized texts (from
images), the locale must be set prior to that via SetLocale(). This CL
refactors Init() to take the locale parameter, and removes the odd
SetLocale() API.
Bug: 34029338
Test: 'Run graphics test' under recovery.
Change-Id: I620394a3d4e3705e9af5a1f6299285d143ae1b01
|
|
This allows recovery to work on devices without screen.
The stub recovery UI does nothing except print to stdout.
Test: write 'recovery\n--wipe_data\n--reason=wipe_data_from_ota\n'
to misc and boot to recovery on a device without screen.
Bug: 33175036
Change-Id: Icde698aa2e2e29f4b3d0532dfd3c6a939ac2bc63
|
|
Bug: 29547343
Change-Id: I398160c85daac90ffab2fa9bb2e96795b9e9885a
(cherry picked from commit 35fff61b1c0d736d090a1cd1bb4e99141cc88ad8)
|
|
Bug: http://b/23102347
Test: boot into recovery.
Change-Id: Ib2ca560f1312961c21fbaa294bb068de19cb883e
Merged-In: Ib2ca560f1312961c21fbaa294bb068de19cb883e
|
|
Bug: http://b/23102347
Test: boot into recovery.
Change-Id: Ib2ca560f1312961c21fbaa294bb068de19cb883e
|
|
Change-Id: Ief92ec99d902ed58a48be9c2486cb99fdb184d7b
|
|
Copy pasta is never as delicious as ones hopes.
Also fix the Pike not rendering recovery bug.
Change-Id: I903da7da436e3347a22ff51633e8a0f28fea2c46
|
|
Clean up the recovery image and switch to libbase logging.
Bug: 28191554
Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35
(cherry picked from commit 747781433fb01f745529c7e9dd97c5599070ad0d)
|
|
Clean up the recovery image and switch to libbase logging.
Bug: 28191554
Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35
Merged-In: Icd999c3cc832f0639f204b5c36cea8afe303ad35
|
|
Clean up the recovery image and switch to libbase logging.
Bug: 28191554
Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35
|
|
Bug: 29547343
Change-Id: I398160c85daac90ffab2fa9bb2e96795b9e9885a
|
|
Add support for landscape layouts to the existing portrait support.
Bug: http://b/29418855
Test: tested manually with "Run graphics test" on flounder/fugu/ryu.
Change-Id: Ib4a62bf5f2b8a1cef6028a01f05145104660560a
|
|
Add a new command "--security" to boot commands. If this command is
observed as part of BCB, choose a different background text picture
for installing stage in recovery UI. As a result, users will see
"installing security update" instead of "installing system update"
when applying a security update package.
Bug: 27837319
Change-Id: I2e2253a124993ecc24804fa1ee0b918ac96837c5
|
|
Bug: http://b/26548285
Change-Id: I20ae75c4ec2dc64b982a047dba498ebda029c90d
|
|
* Use new animation.
* Use new non-holo progress bars.
* Use recommended spacing for recovery UI.
Bug: http://b/26548285
Change-Id: I8411e89d6a6a9ce638b8645e19e5082d0d968cee
|
|
But keep the new code so we can easily test new animations when we have them.
This change includes tbao's de-interlace script, plus a one-liner that's
necessary to play the animation at the correct speed when there's no
progress bar showing. (This was always a bug, it's just way more noticeable
when your animation only has 7 frames.)
Bug: http://b/28316654
Bug: http://b/26548285
Change-Id: I32c601c352d6be235d1b44f14fca7e125defd77d
|
|
Bug: 28220065
Change-Id: Ida199c66692a1638be6990d583d2ed42583fb592
|
|
Switch to a Wear-like intro/loop system. We don't have an intro yet,
but hopefully this will let Wear delete more code when they move to N.
Unlike them, we don't hard-code the number of frames: we just look to
see what we have available. We do hard-code the fps though.
Also add a graphics test mode so you can see a demo of the UI components
without having to actually apply an OTA.
Also fix a bug where default locale is null rather than en-US: it's
more useful to show _some_ text if we don't have a locale (which should
only be during development anyway).
Bug: http://b/26548285
Change-Id: I63422e3fef3c41109f924d96fb5ded0b3ae7815d
|
|
The only difference from SetColor in ScreenRecoveryUI is the that the
LOG messages have slightly different colors. That's not enough to
warrant a duplicate function. So this patch removes SetColor and uses
the parent class version.
This patch also moves the DrawTextLine* functions into ScreenRecoveryUI
since they're mostly the same. It also moves char_width and char_height
into the class instead of keeping them as static variables.
Bug: 27407422
Change-Id: I30428c9433baab8410cf710a01c9b1c44c217bf1
|
|
The function that modifies rtl_locale exists only in the base class,
and so the variable should not have a duplicate in the derived class,
otherwise there may be incosistent values when it is read by the derived
class (the thinking being that invoking the function will modify the
base class version of the variable, and not the derived class version).
Remove the updateMutex variable, and instead re-use the one in the base
class.
Also remove LoadBitmap from WearUI since it is identical to the one in
ScreenRecoveryUI.
Bug: 27407422
Change-Id: Idd823fa93dfa16d7b2c9c7160f8d0c2559d28731
|
|
This reverts commit 1c7b2230d8aac9f064f68c48b6aa26aca000cc9d.
This change can lead to the derived class indirectly (and incorrectly) calling some functions from the base class, which can lead to unpredictable behavior.
Bug: 27407422
Change-Id: I126a7489b0787dc195e942e2ceea6769de20d70c
|
|
This patch performs the following modifications:
- Remove setBackground function, and currentIcon member variable.
- Remove common Progress*, Redraw and EndMenu functions.
Bug: 27407422
Change-Id: Ic3c0e16b67941484c3bc1d04c9b61288e8896808
Signed-off-by: Prashant Malani <pmalani@google.com>
|
|
We allow vendor-specific icon installing image but have defined private
animation_fps that can't be overridden. This CL changes the image
generator to optionally embed FPS (otherwise use the default value of
20) into the generated image.
For wear devices, they are using individual images instead of the
interlaced one. Change the animation_fps from private to protected so
that it can be customized.
Bug: 26009230
Change-Id: I9fbf64ec717029d4c54f72316f6cb079e8dbfb5e
|
|
Change-Id: I354a8c424d340a9abe21fd716a4ee0d3b177d86f
|
|
When calling ScreenRecoveryUI::ShowFile(), the only thing that gets
inadequately logged is the progress bar. Replace the call to
ScreenRecoveryUI::Print() with ScreenRecoveryUI::PrintOnScreenOnly() for
the progress bar, so we can avoid calling redirect_stdio().
Change-Id: I4d7c5d5b39bebe0d5880a99d7a72cee4f0b8f325
|
|
Although stdout and stderr are both redirected to log file with no
buffering, we are seeing some outputs are mixed in random order.
This is because ui_print commands from the updater are passed to the
recovery binary via a pipe, which may interleave with other outputs
that go to stderr directly.
In recovery, adding ui::PrintOnScreenOnly() function to handle
ui_print command, which skips printing to stdout. Meanwhile, updater
prints the contents to stderr in addition to piping them to recovery.
Change-Id: Idda93ea940d2e23a0276bb8ead4aa70a3cb97700
|
|
This makes it easier to go back and forth without losing current output.
Also make the display more like regular more(1).
Bug: http://b/20834540
Change-Id: Icc5703e9c8a378cc7072d8ebb79e34451267ee1b
(cherry picked from commit c049163234003ef463bca018920622bc8269c69b)
|
|
This makes it easier to go back and forth without losing current output.
Also make the display more like regular more(1).
Bug: http://b/20834540
Change-Id: Icc5703e9c8a378cc7072d8ebb79e34451267ee1b
|
|
gr_surface was causing confusion for no good reason.
Change-Id: If7120187f9a00dd16297877fc49352185a4d4ea6
|
|
This makes it easier for us to deal with arbitrary information at the
top, and means that headers added by specific commands don't overwrite
the default ones.
Add the fingerprint back, but broken up so it fits even on sprout's
display.
Change-Id: Id71da79ab1aa455a611d72756a3100a97ceb4c1c
|
|
Change-Id: I76a042432aede08ceaf250319cf5eeb25d601150
|
|
Our long-press UI sends KEY_ENTER for long presses, which the long-press
UI treats as equivalent to KEY_POWER in the regular UI. So anywhere we accept
KEY_POWER we should accept KEY_ENTER too.
Change-Id: I99d376c961887043cf02037c26d000c8ba4d66f9
|
|
Most importantly, this one no longer skips lines because of wrapping.
Change-Id: Ic1c1944682ab8cbf3d542418ee86d29819173fc9
|
|
Currently fugu has a custom subclass to handle this. The default code
supports devices with trackballs but not all shipping Nexus devices?
That's just silly.
Change-Id: Id2779c91284899a26b4bb1af41e7033aa889df10
|
|
This fixes the N9 performance problem.
Change-Id: I00c10d4162ff266a6243285e5a5e768217f6f799
|
|
Dynamically allocate the text and menu arrays instead.
Change-Id: Idbfc3fe4e4b50db4fee62ac2b6a7323cad369749
|
|
Previously most devices would lose the character before a line wrap.
The log's text rendering was starting at offset 4 but none of the
arithmetic was taking this into account. It just happened to work
on the Nexus 9's 1536-pixel wide display (1536/18=85.3) but not on
a device such as the Nexus 5 (1080/18=60).
The only active part of this change is the change from 4 to 0 in the
gr_text call. The rest is just a few bits of trivial cleanup while I
was working out what was going on.
Change-Id: I9279ae323c77bc8b6ea87dc0fe009aaaec6bfa0e
|
|
The real problem is that the recovery UI is sluggish. But being able
to wrap off the top to the bottom halves the maximum distance you'll
have to go.
Change-Id: Ifebe5b818f9c9a1c4187d4ac609422da1f38537f
|
|
Return to the recovery to the holo appearance.
Bug: 15424396
Change-Id: Id4d3f23e0a6251a12aa42f3793cff347f38b4243
|
|
Since we don't have quantum assets for recovery yet, go back to the
holo appearance (dark background, blue glowing progress bar) for
lmp-preview.
Change-Id: Id4d3f23e0a6251a12aa42f3793cff347f38b4243
|
|
Provide different recovery UI resources for different display
densities. Right now only the text images and the progress bars are
rescaled; the main icon will get scaled when it's updated for QP.
Lightly quantum-ify the rest of the recovery interface. (Light
background, progress bars, etc.)
Change-Id: Ia639c4ce8534b01bc843524efbc4b040c1cf38b3
|
|
Reduce the number of copies of libpng boilerplate. Rename
res_create_* functions to be more clear. Make explicit the use of the
framebuffer pixel format for images, and handle more combinations of
input and output (eg, loading a grayscale image for display rather
than use as a text alpha channel).
Change-Id: I3d41c800a8f4c22b2f0167967ce6ee4d6b2b8846
|
|
Recovery now draws directly to the framebuffer by rolling its own
graphics code, rather than depending on libpixelflinger.
The recovery UI is modified slightly to eliminate operations that are
slow with the software implementation: when the text display / menu is
turned on, it now appears on a black background instead of a dimmed
version of the recovery icon.
There's probably substantial room for optimization of the graphics
operations.
Bug: 12131110
Change-Id: Iab6520e0a7aaec39e2ce39377c10aef82ae0c595
Conflicts:
minui/resources.c
|
|
Instead of one 'base' installing image and a number of overlay images
that are drawn on top of it, we represent the installing animation
with one PNG that contains all the animation frames, interlaced by
row. The PNG is expected to have a text chunk with the keyword
'Frames' and a value that's the number of frames (as an ascii
string). This representation provides better compression, removes the
need to subclass ScreenRecoveryUI just to change the position of the
overlay or number of frames, and doesn't require gr_blit() to support
an alpha channel.
We also remove the 'indeterminate' progress bar used when wiping data
and/or cache. The main animation serves the same purpose (showing
that the device is still alive); the spinning progress bar has been
redundant for a while.
This changes the default recovery animation to include the
antenna-wiggling and gear-turning that's used in the Nexus 5 recovery
animation.
Change-Id: I51930a76035ac09969a25472f4e572b289418729
Conflicts:
screen_ui.cpp
screen_ui.h
|
|
Recovery now draws directly to the framebuffer by rolling its own
graphics code, rather than depending on libpixelflinger.
The recovery UI is modified slightly to eliminate operations that are
slow with the software implementation: when the text display / menu is
turned on, it now appears on a black background instead of a dimmed
version of the recovery icon.
There's probably substantial room for optimization of the graphics
operations.
Bug: 12131110
Change-Id: Iab6520e0a7aaec39e2ce39377c10aef82ae0c595
|
|
Instead of one 'base' installing image and a number of overlay images
that are drawn on top of it, we represent the installing animation
with one PNG that contains all the animation frames, interlaced by
row. The PNG is expected to have a text chunk with the keyword
'Frames' and a value that's the number of frames (as an ascii
string). This representation provides better compression, removes the
need to subclass ScreenRecoveryUI just to change the position of the
overlay or number of frames, and doesn't require gr_blit() to support
an alpha channel.
We also remove the 'indeterminate' progress bar used when wiping data
and/or cache. The main animation serves the same purpose (showing
that the device is still alive); the spinning progress bar has been
redundant for a while.
This changes the default recovery animation to include the
antenna-wiggling and gear-turning that's used in the Nexus 5 recovery
animation.
Change-Id: I51930a76035ac09969a25472f4e572b289418729
|
|
In order to support multi-stage recovery packages, we add the
set_stage() and get_stage() functions, which store a short string
somewhere it can be accessed across invocations of recovery. We also
add reboot_now() which updater can invoke to immediately reboot the
device, without doing normal recovery cleanup. (It can also choose
whether to boot off the boot or recovery partition.)
If the stage string is of the form "#/#", recovery's UI will be
augmented with a simple indicator of what stage you're in, so it
doesn't look like a reboot loop.
Change-Id: I62f7ff0bc802b549c9bcf3cc154a6bad99f94603
|
|
Because backgroundIcon[] is not initialized by the ScreenRecoveryUI
constructor, it should be initialized explicitly to NULL in Init().
If it is not initialized, ScreenRecoveryUI::SetBackground() can fail
for the NONE icon because the NULL test can fail and junk will be
dereferenced.
Change-Id: I4e3738d2e241ed90df43c984fb41e0072933f50a
|
|
Zero initialize the text buffer to make recovery not
render garbage when showing the menu or messages.
Change-Id: I0dd0d357757f6b0fd52ad3b3617d42bb1b835245
|
|
When installing a package, we should have /tmp and /cache mounted and
nothing else. Ensure this is true by explicitly mounting them and
unmounting everything else as the first step of every install.
Also fix an error in the progress bar that crops up when you do
multiple package installs in one instance of recovery.
Change-Id: I4837ed707cb419ddd3d9f6188b6355ba1bcfe2b2
|
|
Recovery changes:
- add a method to the UI class that is called when a key is held down
long enough to be a "long press" (but before it is released).
Device-specific subclasses can override this to indicate a long
press.
- do color selection for ScreenRecoveryUI's menu-and-log drawing
function. Subclasses can override this to customize the colors they
use for various elements.
- Include the value of ro.build.display.id in the menu headers, so you
can see on the screen what version of recovery you are running.
Change-Id: I426a6daf892b9011638e2035aebfa2831d4f596d
|
|
We met factory issue that some devices would crash in recovery mode
because the backgroundIcon array did not reset to NULL when initializing.
Bug: 9568624
Change-Id: I13c7a7cc1053a7ffdbadd71740c1a2b4a2af6bba
Signed-off-by: yetta_wu <yetta_wu@asus.com>
Signed-off-by: Iliyan Malchev <malchev@google.com>
|
|
We met factory issue that some devices would crash in recovery mode
because the backgroundIcon array did not reset to NULL when initializing.
Bug: 9568624
Change-Id: I13c7a7cc1053a7ffdbadd71740c1a2b4a2af6bba
Signed-off-by: yetta_wu <yetta_wu@asus.com>
Signed-off-by: Iliyan Malchev <malchev@google.com>
|
|
Get rid of the notion of a font's "ascent"; the reference point for
drawing is the top-left corner of the character box rather than the
baseline. Add some more space between the menu entries and make the
highlight bar around the text.
Replace the default font.png with two images; the build system will
include one or the other based on the resolutions of the device.
Restore the original compiled-in bitmap font, to fall back on when
font.png can't be found (eg, in the charger binary).
Add support for bold text (when a font.png image is used).
Change-Id: I6d211a486a3636f20208502b1cd2aeae8b9f5b02
|
|
Instead of representing the font used for menus and log messages in
the recovery binary, load it from a resource PNG image. This allows
different devices to substitute their own font images.
Change-Id: Ib36b86db3d01298aa7ae2b62a26ca29e6ef18014
|
|
Bug: 7204420
Change-Id: I16d3346ce54b1aa5a0e6a02839ae9fbd4718fffa
|
|
Center and fix the extents for those locales that have multiple lines
of text. Add Urdu as an RTL language.
Bug: 7064142
Change-Id: I4c1aa1198be29cab01129dabf2c4a026b93719a6
|
|
Add images of text for all locales we support. Make the progress bar
fill the correct way for RTL languages. (Flip the direction the
spinner turns, too, just for good measure.)
Bug: 7064142
Change-Id: I5dddb26e02ee5275c57c4dc4a03c6d68432ac7ba
|
|
Center and fix the extents for those locales that have multiple lines
of text. Add Urdu as an RTL language.
Bug: 7064142
Change-Id: I4c1aa1198be29cab01129dabf2c4a026b93719a6
|
|
Add images of text for all locales we support. Make the progress bar
fill the correct way for RTL languages. (Flip the direction the
spinner turns, too, just for good measure.)
Bug: 7064142
Change-Id: I5dddb26e02ee5275c57c4dc4a03c6d68432ac7ba
|
|
- protect against missing/malformed bitmaps: fail to display them but
don't crash.
- don't draw animation overlays until the overlay offset is computed.
- logging cleanup
Change-Id: Ieb1c155cfbb11e643000bdb5d1a57900c8757739
|
|
Also make writing the locale a bit more robust.
Change-Id: I803dd0aa0b9d6661fad74ea13fb085682402323c
|
|
- recovery takes a --locale argument, which will be passed by the main
system
- the locale is saved in cache, in case the --locale argument is
missing (eg, when recovery is started from fastboot)
- we include images that have prerendered text for many locales
- we split the background states into four (installing update,
erasing, no command, error) so that appropriate text can be shown.
Change-Id: I731b8108e83d5ccc09a4aacfc1dbf7e86b397aaf
|
|
They're completely broken and have been for months because this code
makes no sense.
Change-Id: Ibabcd3dbe5a004a45b341e4a5215aa3df77e1861
|
|
Move the key for handling keys from ScreenRecoveryUI to RecoveryUI, so
it can be used by devices without screens. Remove the UIParameters
struct and replace it with some new member variables in
ScreenRecoveryUI.
Change-Id: I70094ecbc4acbf76ce44d5b5ec2036c36bdc3414
|
|
Move the key for handling keys from ScreenRecoveryUI to RecoveryUI, so
it can be used by devices without screens. Remove the UIParameters
struct and replace it with some new member variables in
ScreenRecoveryUI.
Change-Id: I4c0e659edcbedc0b9e86ed261ae4dbb3c6097414
|
|
Replace the device-specific functions with a class. Move some of the
key handling (for log visibility toggling and rebooting) into the UI
class. Fix up the key handling so there is less crosstalk between the
immediate keys and the queued keys (an increasing annoyance on
button-limited devices).
Change-Id: I698f6fd21c67a1e55429312a0484b6c393cad46f
|
|
Move all the functions in ui.c to be members of a ScreenRecoveryUI
class, which is a subclass of an abstract RecoveryUI class. Recovery
then creates a global singleton instance of this class and then invoke
the methods to drive the UI. We use this to allow substitution of a
different RecoveryUI implementation for devices with radically
different form factors (eg, that don't have a screen).
Change-Id: I76bdd34eca506149f4cc07685df6a4890473f3d9
|
|
Change-Id: I423a23581048d451d53eef46e5f5eac485b77555
|
|
Change-Id: I68a67a4c8edec9a74463b3d4766005ce27b51316
|
|
Change-Id: I6d52fd1db27fdf1b61f41f598a2209b70385b106
|
|
Events are now delivered through a callback mechanism during
a call to ev_dispatch(). This will allow us to extend the events
code to handle other devices/fds, not just input. One such example
is the ability to process uevents.
During initialization, we provide an input callback to ev_init
that gets called when a new event is encountered during dispatch.
ev_get has been removed and replaced with ev_get_input() helper
function that can be called from inside the callback to attempt
to get an input event.
The existing client of ev_get in recovery has been split up such
that the input thread just calls ev_wait(); ev_dispatch(); and
the input_callback handles individual events by using the
ev_get_input() helper.
Change-Id: I24d8e71bd1533876b4ab1ae751ba200fea43c049
Signed-off-by: Dima Zavin <dima@android.com>
|
|
Change-Id: I912d3ab32973c5c5e7b6b1749698f8a71d884fa3
|
|
Change-Id: Iabe8be5bbfa7d2bf1d13280c8734ff75b62a152f
|
|
The new android_reboot() function is a nicer way to reboot the
system. I can optionally sync() and remount read-only writable
filesystems. This fixes bug 3350709.
Change-Id: Ic4c8676debd642e57bce3107b99dd810d90b6f82
|
|
(Cherry-pick back from master.)
Bug: 4071007
Change-Id: I28355c593770df678968185171bdd19dabe7f062
|
|
Change-Id: Icba35da91167d30c446581afb47d0804e49964bf
|
|
Also remove the weird backwards compatibility thing for animations
with fewer than 10 frames. Frames are always named "name01.png",
"name02.png", ..., no matter how many there are.
Change-Id: I7af64fdec1bfcdb0464998b735ec8d6c626ffe9d
|
|
Change some of the UI parameters (# of indeterminate progress bar
frames, fps, etc.) from #defined constants to variables that can be
set by the device-specific recovery_ui code (via a new function).
Support overlaying different images on top of the base installation
icon to animate it. Make the FPS control more accurate.
Change-Id: I9268b389b7ea6b3ed9e0c7eae37baf4272e60edd
|
|
If recovery sits for 2 minutes in prompt_and_wait(), and you've never
turned the screen on via the magic keypress, go ahead and reboot. (We
used to assume that the user could pull the battery to get out of this
state, but on devices with nonremovable batteries...)
If you've ever enabled display of the log/menu since recovery started,
we assume you know what you're doing and will stay in recovery until
you choose to reboot.
Bug: 3387873
Bug: 3387274
Change-Id: I041621e5db132df9a925e6808845a7c45e1b427a
|
|
Let applypatch read and write EMMC partitions as well as MTD ones.
This enables incremental updates that include boot image changes, as
well as OTA of new recovery partitions.
Change-Id: Ib1861219c7ca66dff29ad02d6a0a14e5f03eb4d8
|
|
Make the mount and format functions take extra parameters describing
the filesystem type and add support for mounting and formatting ext4
filesystems on EMMC.
Change recovery to consistently use stdout for status messages instead
of mixing stdout and stderr.
|
|
Replaces the "install sdcard:update zip" menu option with one that
displays a menu of zip files (and subdirs) on the sdcard and lets you
pick which one to install.
Change-Id: Icff541525f2fdfc8939a91af626ecc386ac9dd07
|
|
Change-Id: Ie6c6c920260dfa759fbb15b1f352d6bb0fa7146c
|
|
Change-Id: I46e4d7fe76e4219207e46f19e50188e38bb932b7
|
|
Change-Id: I008510bf614606a46a630c7adc39464ce1143ec3
|
|
Let applypatch read and write EMMC partitions as well as MTD ones.
This enables incremental updates that include boot image changes, as
well as OTA of new recovery partitions.
Change-Id: I3766b9e77c639769ddf693b675da51d57f6e6b1d
|
|
Make the mount and format functions take extra parameters describing
the filesystem type and add support for mounting and formatting ext4
filesystems on EMMC.
Change recovery to consistently use stdout for status messages instead
of mixing stdout and stderr.
|
|
Replaces the "install sdcard:update zip" menu option with one that
displays a menu of zip files (and subdirs) on the sdcard and lets you
pick which one to install.
Change-Id: I85c94c0e9bc8e05ca52031fc29ca2624c2695ced
|
|
Remove support for the HTC-specific "firmware" update command and the
corresponding edify function write_firmware_update(). This
functionality is now done by an edify extension library that lives in
vendor/htc.
Change-Id: I80858951ff10ed8dfff98aefb796bef009e05efb
|
|
|
|
Instead of six separate images for the left end, right end, and tiled
center portion of the full and empty progress bars, just use two
images: a full bar and an empty bar. Draw the left side of the full
bar and the right side of the empty one, moving the boundary rightward
to "fill" the bar. This makes recovery trivially smaller, and allows
fancier images to be used as progress bars.
Support paletted PNG images as resources.
|
|
If the a recovery icon file is so short that we can't even read the
8-byte header, put a message in the log but not on the device screen.
We intentionally have zero-length files for some icons on some devices,
if they're never shown (eg, the firmware installation icons are only
used on HTC devices).
|
|
gcc 4.4 complains about some of the recovery ui functions not being
declared. To include the header, we have to fix the 'volatile'
declaration (otherwise there's a compiler error).
Move the dream-specific images to vendor/htc/dream, make the default
images a generic phone.
|
|
Take some device-specific details of the recovery UI (eg, what keys to
press to bring up the interface and perform actions, exact text of the
menu, etc.) and split them out into separate C functions. Arrange to
take implementations of those functions from the appropriate vendor
directory at build time. Provide a default implementation in case no
vendor-specific one is available.
|
|
Original author: dougz
Merged from: //branches/donutburger/...
Automated import of CL 144105
|
|
Automated import of CL 144082
|
|
|
|
|
|
|
