| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fixes broken shell prompt in Terminal and adb shell
Before: https://del.dog/7vphlkc
After: https://del.dog/vhkjgo8
Add as prebuilt with suffix "_twrp" to avoid conflict
with original mkshrc and rename via POST_INSTALL_CMD
Prebuilt version adjusts TMPDIR variable from
"/data/local/tmp" to "/tmp" for TWRP
Change-Id: I42a1b2a8c114f66dbe659c07485f1dfae8a5d314
|
|
* build modified vdc_pie binary with 'checkpw' command support
if building with Android 9.0 platform. That command and others
we don't care about, are removed from Pie vdc. Our vdc_pie will
run if system sdk version is > 27, otherwise system vdc is used.
Code adapted from Android 9.0 system/vold/vdc.
* include prebuilt vdc_pie(arm, arm64) binary if building with lower
than Android 9.0 platform - vdc_pie cannot be build from source
with those platforms without additional imports from Android 9.0
* skip vdc "getpwtype" command for Pie - vds communicates with vold
directly, no need for connection retries first
* add /system/bin/servicemanager to required services
* mount per-devive additional partitions needed for decryption
listed with device BoardConfig.mk TW_CRYPTO_SYSTEM_VOLD_MOUNT
flag like(space separated):
TW_CRYPTO_SYSTEM_VOLD_MOUNT := vendor cust odm
* add function to backup crypto footer before running vdc commands
and restore it after - on Xiaomi Mi Max 3 both Oreo and Pie stock
roms vold alters cripto footer when decrypting data in recovery
which causes system to ask for crypto password at next reboot
although password stays unchanged. Crypto footer backup/restore
added as workaround for systems whit ro.build.version.sdk > 25.
Also to preserve crypto footer integrity decryption attempts are
skipped if footer backup fails to ensure no data loss.
Code adapted from
https://gerrit.omnirom.org/#/c/android_bootable_recovery/+/31206/
Change-Id: I0a383f3843578fa55595cfea3b7c9c4431646a1a
|
|
Change-Id: Ie0292f4ffea5993a4ae74fa04fc5c8252ca2cfcf
|
|
* Following error while running mke2fs in TWRP compiled in 8.1+ tree:
libc: CANNOT LINK EXECUTABLE "mke2fs": library "libext2_misc.so" not found
Change-Id: I786f325229167dbd0d1d5f2a1ea95e9fe15a227e
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
|
|
Change-Id: I0e05e29b43c748d7746dc70428a4eb7664b7d2d4
|
|
Building in 9.0 may require you to add a flag to your twrp fstab
with the fileencryption details like:
fileencryption=ice:aes-256-heh
Verify this against your device's stock fstab of course.
Change-Id: If9286f5d5787280814daca9fbc8f5191ff26a839
|
|
Change-Id: I2ca7580bbde5a8903b9ba5c1513ddba887e8d49e
|
|
* adbd no longer goes to root/sbin instead it's
going to system/bin reference:
https://github.com/omnirom/android_system_core/commit/93defc17f376041437e5157a7c4d9e0344441811
Change-Id: Ib2bc5e0bb3ac868741fa3feacac5ef68aa1daa4b
|
|
Change-Id: I57a1a807841b20860c9a1c9523be385b12b6b933
|
|
* In omni-8.0 'android.hidl.base@1.0.so', although properly built
does not get copied to the /sbin/ directory for TWRP, resulting
in TWRP constantly *trying* to restart with the missing lib:
CANNOT LINK EXECUTABLE "/sbin/recovery":
library "android.hidl.base@1.0.so" not found
Leading to a stuck on "black" screen (or some splash screen, but
never even reaching TWRP splash screen).
Change-Id: I10a3c3d72c0f141687dbbf552e59fb31c015b278
|
|
Change-Id: Ic8200da4e99826736e002a1ab5f9e5f967e84193
|
|
Includes various minor fixes for building in Android 8 trees with r23+ tag
Update FBE extended header in libtar to version 2 and include the entire
ext4_encryption_policy structure now after translating the policy.
See this post for more details:
https://plus.google.com/u/1/+DeesTroy/posts/i33ygUi7tiu
Change-Id: I2af981e51f459b17fcd895fb8c2d3f6c8200e24b
|
|
Change-Id: Ie22691433aefa3b8819ec14e0349ee12bd88a1c2
|
|
* OmniROM 8.0 uses AOSP f2fs-tools which builds a static
mkfs.f2fs directly to $(TARGET_RECOVERY_ROOT_OUT)/sbin
Change-Id: I364a13e33e71abceab2f9ba1bd3179c2d9672b27
|
|
Change-Id: I1311e4f9bb2409e856df3d333cc0d6c3f8f097f8
|
|
Change-Id: I99fad0cf2de7ff95814eff1a5f8dde59afb4b5c2
|
|
This patch is to refactor twrpDigest using polymorphism
and inheritance to use the same call patterns for creating and
reading a digest. Now a library.
Use SHA2 from libcrypto. SHA2 is default if device has libcrypto.
Change string MD5 everywhere to use digest or Digest instead. Updated
string tags to digest. Translation will be required.
Switch out digest code into a driver class from partitionmanager.
SHA2 is better for digest creation due to decreased collision space
compared to MD5 and SHA1.
See https://en.wikipedia.org/wiki/SHA-2
Change-Id: I74b5546789990b12aa4ce2e389d25f80a3fe213f
|
|
This reverts commit 0a8a7cebf154f7062174c4fac4a9c836038fbfbc.
Change-Id: Icdb1f2e93aeaf35a66b6f67eaff51d9af5fd2e9a
|
|
* Relink libf2fs.so in all cases except PLATFORM_SDK_VERSION=23
with no CM_PLATFORM_SDK_VERSION set as 4 or above.
Change-Id: I58bcc7daeb2d67d41b8912cea73690d94f26dd56
|
|
middle finger ahead
Change-Id: I14a036a5a79121056e6185f367fc6d61bcec46d2
|
|
Change-Id: I7410a0c8e439eec90a955ee9201efd9a92bb9635
|
|
These changes are needed by any ROM where devices are configured to
use TOOLBOX/TOYBOX instead of BUSYBOX (i.e., TW_USE_TOOLBOX := true).
Change-Id: I68b88cc9fb857f32864556c4b6c9c8e6ee744051
|
|
No point checking filesystem repeatedly/check may change in future
Change-Id: I0413b07b850f785eb5150c6ed18836cc56e94d6f
|
|
Note: I will have to add a build flag for excluding the app later for
watches and maybe Android TV. I will also have to add support in the
tablet and watch layouts later. I will merge this for the initial roll out
to select devices and finish up later.
Change-Id: Ia4ce5522fae542afa1539b10c0691315392a19ab
|
|
Change-Id: Ib688ddd0c32d3999590cacd86b6d9b18eac336e9
|
|
Change-Id: I7eaf80e327985f53791f90fbdebad022a9650d31
|
|
busybox sh does not seem to work properly in 7.0 trees so use
mksh for sh instead.
Change-Id: Ia33bc3894f929b1348c8714d4ddd00a2671c7e94
|
|
Change-Id: I6376920775ddabb4d4af505fffd86e404403a64a
|
|
Change-Id: I668604cddc8e8afbf78709f3f872bea4e9f4aa06
|
|
android-6.0 branch of ntfs-3g matches the cm-13.0 version now,
check platform version instead of CM_SDK version.
Change-Id: Ic4aed613084d530c814611678f70d75260b9adc4
|
|
Functionality for client side to backup
tar and image streams over adbd to the client under backup.ab.
Using adb backup on the client side you can backup the partitions
TWRP knows about.
On the client side you can do the following:
adb backup -f <filename> --twrp <options> where options are
--compress: compress data
system: backup system
cache: backup cache
data: backup data
boot: backup boot
etc for each partition.
You can string multiple options,
i.e. adb backup -f <filename> --twrp --compress cache system data
adb backup in TWRP will take any option corresponding
to TWRP fstab partitions, e.g. efs boot as well.
If you do not specify the filename with the -f option,
adb will backup your data to a filename backup.ab on the client.
You can then rename the file and encrypt it with desktop tools.
If you don't want to use command line arguments:
adb backup --twrp
will bring up the gui and allow you to choose partitions
from the backup page.
To restore the backup use the following convention:
adb restore <filename>
Structures are used to store metadata in binary inside
of the file itself. If the metadata structure is modified,
update the adb version so that it will invalidate older
backups and not cause issues on restore. When restoring,
we currently do not support picking specific partitions.
It's all or nothing.
Change-Id: Idb92c37fc9801dc8d89ed2a4570e9d12e76facf8
|
|
Change-Id: Ia609eec928278fc63e699d42799f74b4ada82221
Signed-off-by: sndnvaps <sndnvaps@gmail.com>
|
|
logd, the init.recovery.logd.rc, and other related files were
included by default if your device configs specified
TARGET_USES_LOGD := true which would be the case for any device
that has a full ROM tree instead of a minimal TWRP tree.
Change-Id: Ia1e55703631f0f22beab2f4d4479599b88539e1a
|
|
Developers and device maintainers may find it useful to have access
to logcat in recovery. This patch set adds the following build flags:
TARGET_USES_LOGD - This is an Android build flag that enables logd
support. Devices that don't have built in kernel logging to dev/log/*
will need this flag for logcat. We'll also use this to include the
necessary support files for logd in TWRP.
TWRP_INCLUDE_LOGCAT - This enables logcat support in recovery.
I pulled the init entries from my HTC One M8 GPE boot.img,
so I'm not certain whether these will work for all devices
or if they're all necessary.
Feedback is welcome.
PS2: Use "TARGET_USES_LOGD" instead as this flag already exists, and
previous flag was named incorrectly (logd isn't kernel logging)
PS3: Start logd service on load_persist_props action, needed for 6.0+
PS4: More info on "TARGET_USES_LOGD" flag as related to liblog
compilation can be found at the below links:
https://android.googlesource.com/platform/system/core/+/android-6.0.1_r10/liblog/Android.mk#27
https://android.googlesource.com/platform/system/core/+/android-6.0.1_r10/liblog/Android.mk#50
Whether or not this flag is needed for logcat in TWRP is dependent
on whether liblog was compiled with this flag.
PS5: Update commit message to better describe "TARGET_USES_LOGD" flag
PS6: Another commit message update
Change-Id: Iaac6c6c822dc93fbe4b6eadcf24eef6995dd6b50
|
|
if the image has the right magic bytes to be a sparse image,
use simg2img to flash the image
create a rule to make a fully dynamic simg2img which results in a
much smaller increase in gzip ramdisk size (2KB vs 40KB)
Change-Id: I1b0f6bc127da46103888b1154a9bddd8ac02c01d
|
|
Builder using a custom theme may have need for this. Add a flag to
easily enable jpg support.
Change-Id: Ica74f8cb1312d3193105f2201a5cf8073e2edc82
|
|
Add script to compare string values between 2 language xml files
which will make it easier to identify strings that are missing
between the 2 files.
Move relink-binaries.sh to scripts folder and update it to handle
relinking 64 bit binaries.
Change-Id: Ia7a8bdbeea02256b3b864ab77e15912795275d33
|
|
Fix permissions rarely fixed anything on more recent versions of
Android and usually made things worse. Instead we will replace it
with a more dumbed down option that should fix contexts on
/data/media with a few improvements to ensure that contexts get
fixed for multiple users and on adopted storage.
Change-Id: If5523781936a0b04196e2ad871cae767ebae2583
|
|
Chances are there are not many themes in widespread use that are
using jpeg images, but this will be easy to revert back or even
just temporarily modify if we need jpeg support in a pinch.
Change-Id: If17b05ce3ebccce724fd74b26ed8ea91b287c3cf
|
|
-Detects, decrypts, and mounts an adopted SD card if a
secondary block device is defined (usually mmcblk1)
-Handles unified storage
-Displays the adopted storage in MTP along with internal
-Factory Reset - wiped just like a data media device, we
retain the keys folder and the storage.xml during a
factory reset
-Backup / Restore
-Disable mass storage when adopted storage is present
-Read storage nickname from storage.xml and apply it to
display names in the GUI
-Read storage.xml and determine what storage location is in
use for /sdcard and remap accordingly
libgpt_twrp is source code mostly kanged from an efimanager
project. It is GPL v2 or higher, so we will opt for GPL v3.
Change-Id: Ieda0030bec5155ba8d2b9167dc0016cebbf39d55
|
|
Change-Id: I75500bfe4e7adf66c5538597d79ed0539e7bb551
Signed-off-by: dianlujitao <dianlujitao@gmail.com>
|
|
Change-Id: Ia5fadd8254340b21a54565e2c7d2b54aa70f19f3
|
|
-Improve code for partitioning sdcards
-Allow user to select a device for partitioning (must be removable)
-Use sgdisk to partition sdcards
-Set default sizes for ext and swap to 0
-Change increments for ext to 256MB and swap to 64MB
Note: sgdisk is included in 6.0. I have included a static prebuilt
sgdisk for trees that do not have sgdisk, however the prebuilt
sgdisk is a decent bit larger than the old parted binary. The old
parted binary is quite old at this point and we only have it for
armv7a. sgdisk should be maintained by AOSP and can be built from
source so it should work across architectures.
Change-Id: Ib80882d9b5776e5e9358b11340fba392e6f1ae09
|
|
CM-13 tree completely changes the names of the binaries that are created
for ntfs-3g. If we are using a CM-13 tree (CM SDK 4) make sure the
dependencies and relinking are adjusted accordingly.
Also, adapt partition code so it can make use of whichever set of
binaries are present.
Change-Id: I810caafa818f18281fd29dcf8f31b3053133b5ed
|
|
* Usage of fsck.exfat is already included in partition.cpp, but the
tool is missing.
* Update the path to mkexfatfs so the button is available when changing
filesystem.
Change-Id: I5f4e27357c6b5a8606043d1bdc2488cc83e55d90
|
|
* Make sure fsck.f2fs and mkfs.f2fs are built for CM12.1/13.0
* Add CM13.0 rule for relinking mkfs.f2fs
* Minor cleanup of nested if/else in prebuilts
Note on CM SDKs: 3=cm-12.1, 4=cm-13.0
I'm not yet sure whether it is possible that the CMSDK increments
within the same branch of CM.
Change-Id: I7b521159a8b5d0e0ea639f5e0fdd885100612df0
|
|
Change-Id: I5d2774c273a90c1f02c074f3c947c13b265972b3
|
|
* Version 3.0.28
* Update filenames in source
* Remove unnecessary symlink to fsck
* Commit "Recode short filenames from DOS codepage (default 437)." has
been reverted since we do not have access to iconv
* Commits cherry-picked on top of 3.0.28:
- mkfs.fat: fix incorrect int type
- Prevent out of bound array read in date_dos2unix()
Change-Id: I50310235c62ec2e6bc90afcd10f2814d3afb5113
|
|
Change-Id: I1217094f0e336445eb4dd5f46242d9719525ffbd
|
|
Add support for mounting ntfs via ntfs-3g and support for wiping
and repairing ntfs partitions.
Change-Id: I82dc4626f459bb93b86eb9ebba64ad3a6560781b
|
|
Change-Id: Ie91d161f4e439a870534639f44a03df22f4fe39a
|
|
Note: Only works on ext2/3/4 partitions. Only tested on ext4.
We can use this in some cases to resize the data partition if an
incorrect fstab caused recovery to not reserve the 16KB for a
crypto footer.
Sometimes the BoardConfig for a custom ROM does not have the
correct size for the system partition and if the ROM flashes a
raw system image, that image will not take up the full block
device. Running resize2fs can fix the size and may allow more
room in the system partition for customizations like busybox or
a larger gapps package.
Sometimes flashing a factory image may flash userdata with an
image with a file system that does not take up the full size of
the block device (e.g. factory images for the Nexus 6 will flash
userdata with a ~24GB userdata image, wasting ~30GB of space).
Using resize2fs we can easily fix this issue without having to do
a full format data.
Change-Id: I631f5c6f567bbc6a9241e5dd95f1e435820a1b13
|
|
Change-Id: I121ef0f5da209be48f6d87559d539c7fc6d85336
|
|
Also add a short while loop to wait for fb0 to be created as was
needed on the x86-64 target for the Android emulator.
Change-Id: Ib1b87bea028ac3eac0541283334a0157cdfbce11
|
|
Change-Id: I87c17715d7acdf6ae15f8a39e3e316715bade6f3
|
|
AOSP and other ROM trees now do a rm -rf of the res folder during
the ramdisk creation process that removes the TWRP resources.
Using /twres instead of /res works around this issue making TWRP
more compatible with AOSP and other build trees.
Change-Id: I0d4c7e06ca381ac5aa0069b6f2b8c47f7dec49e7
|
|
Change-Id: I51bdabbd5b2c2263f3f72cdd2ffcba2bc97e0c43
|
|
Change-Id: Ibf43367446782642f41d437d1d97d62fc7dbb185
|
|
* Bionic tries to load it, and if it isn't in /sbin and /system
is mounted, it loads it from there and prevents it from unmouting
Change-Id: I33d0b6ba4503f2822d96033fa26d53e10b8ce1c5
Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
|
|
Change-Id: I96d91f2d2e38380ff46a6ff6e2c8c9a245aa0431
|
|
Change-Id: I473f5a0412bf35507a755d485bbdf53fd241748b
|
|
Break libblkid into 4 libraries: libblkid, libuuid, libutil-linux and libfdisk.
This should help in later patch updates.
Change-Id: I680d9a7feb031e5c29a603e9c58aff4b65826262
|
|
libsoftkeymaster and its dependencies appear to be unused.
Change-Id: Ib720f5e4d2750a739ba6b65b346c0e167df279d3
|
|
The SuperSU install process is getting rather complicated, so we
will modify the install script slightly and use it to install
all the things and stop trying to check to see if root permissions
have been lost like we used to do.
Change-Id: Ibdb64c909d2bd16e12bb35b4f31f572cc29add47
|
|
Change-Id: If99d0be4b73cdeb388c6cb1b35a215d3b8b3b58d
|
|
The new minzip did not compile in older trees due to needing
mmap64. For older trees we will just use mmap instead. Remove all
files and code pertaining to minzipold. Updater should now build
properly in older trees as well.
Eliminate use of PLATFORM_VERSION in favor of PLATFORM_SDK_VERSION
which should be more consistent and reliable.
Change-Id: I38d2b604a73d1b17a2072c7d60e990b81ece0c10
|
|
Needed starting in 5.0 lollipop for e2fsck, mke2fs, and tune2fs
binaries.
Change-Id: Ie76517df4690f6407cb63d0607c6c0c8a77975e5
|
|
Patch Set 3: Combine into one sed - by bigbiff
Change-Id: Ice3147fae76575f6e09c7df201bcd3f949aa24ea
|
|
Trim cryptfs.c to remove functions that TWRP does not use for
decrypt and remove the need for libfs_mgr from cryptfs.c by
passing some items to cryptfs.c from the partition manager.
Add support for new fstab flags:
encryptable and forceencrypt=/path/to/cryptokey
For example:
flags=forceencrypt=/dev/block/platform/sdhci-tegra.3/by-name/MD1
Note that "footer" is the default, so you do not need to set this
flag on devices that use the footer for the crypto key.
Also add mounttodecrypt if you need to mount a partition during
the decrypt cycle for firmware of proprietary libs.
Clean up decrypt and only support one version
Android 5.0 lollipop decrypt should be backwards compatible with
older versions so we will only support one version, 1.3 that came
with 5.0 lollipop.
Remove support for Samsung TouchWiz decrypt. It does not work with
the latest versions of Samsung encryption anyway and it has not
been updated to work with any AOSP decryption higher than 1.1
Change-Id: I2d9c6e31df50268c91ee642c2fa090f901d9d5c9
|
|
Change-Id: I9e2f359dd7274e1ae885f6a3b392d5ab5ca99ac9
|
|
Migrate previous minzip to minzipold replacing the existing
minzipold. This will break compatibility with trees that do not
support selinux (ICS and older). Migrate former verifier files to
verifierold.
Add fuse.h to recovery source because older trees do not have it.
Add LOCAL_MODULE_TAGS where needed for 4.1 tree.
Change-Id: Iade57cb2b0115af7fce9f56aa98636b1744a1ef4
|
|
Some devices may need additional binaries or libs that TWRP
normally does not need included in /sbin
Use TW_RECOVERY_ADDITIONAL_RELINK_FILES to build them from source
and get them added to the recovery ramdisk.
For example, Nexus 9 needs libc++ included in order to decrypt
the data partition. The following will build it from source and
include it in TWRP:
TARGET_RECOVERY_DEVICE_MODULES := libc++
TW_RECOVERY_ADDITIONAL_RELINK_FILES := \
out/target/product/volantis/system/lib/libc++.so
Change-Id: I147c0d5569c83514d2e50226ecc50e80bf8aac36
|
|
Change-Id: I8c3f084fc34b00edb4cd1b652290df8bc80ea1db
|
|
Kang in cryptfs.c and cryptfs.h from vold.
Use TW_INCLUDE_L_CRYPTO := true to enable.
Ramdisk must contain the normal fstab file in the root in the
usual format of:
fstab.{ro.hardware}
For examble for Nexus 5:
fstab.hammerhead
Or on many Qualcomm devices:
fstab.qcom
Tested against Android 5.0 lollipop on Nexus 7 2012 grouper. Not
sure if or how this will work when we are dealing with a device
with a hardware keystore. Long term we need to add a GUI element
to allow entering a pattern. For now you can decrypt a pattern
unlock by converting the dots to numbers in the following format:
123
456
789
So an upper-case L would translate to 14789 as a password entered
on the keyboard.
Change-Id: I02c29e1f1c2eb29bf002c9fe0fc118357300b5b3
|
|
-Remove dosfstools for arm64 until we can make it compile
-Fix TW_USE_TOOLBOX flag to work again
-Fix symlinking and handling of sh when using mksh
-Fix legacy properties to find futex_wake function
-Fix libcrecovery to not use bsd_signal anymore
-Fix rules for building with regards to libcrecovery
-Update toolbox_recovery rules to compile tools in lollipop
-Fix a few compile errors specific to arm64
Testers report that TWRP does not boot on Nexus 9 and we fail to
get a shell for adb shell. At least it compiles without errors.
Change-Id: I286be8628defb60cc527b8a548c0bdfcb0ebb574
|
|
Change-Id: I9444e50b32517aebeca5ff3644c1c2f0dfff9d29
|
|
Change-Id: Ib93b934c6154a0a8955eb66c1bb0eed8aff10e34
|
|
Update makefiles to no longer rely on INTERNAL_RECOVERY_FILES. Define
LOCAL_ADDITIONAL_DEPENDENCIES instead.
Set LOCAL_LDFLAGS to properly link recovery executable.
Change-Id: I4542104c69399b5a19674b9772ab89c3709efa72
|
|
* Keeps original font system in place
* Uses the same API as original font system:
- You can render only one line at a time
- You can only use one font and color for one gr_text* call
* Caches all rendered text, with a string cache limited to 400
entries, then it trucates to 250, which results in memory
usage hovering around 5-10MB
Change-Id: I36107b9dcd8d57bae4486fce8b8f64e49ef3d906
Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
|
|
Change-Id: Iac1966a1c5bfcb627e1bee7100c4b5d069b0a5b7
|
|
Change-Id: I46a1e7bf115c45616774b0571b17e38777ba87f8
|
|
Big thanks to Dees_Troy for helping with the implementation.
Change-Id: I6c9c522b9c9de5dc139e2ecb0141008182ba07f0
|
|
Allows sending openrecoveryscript commands to TWRP via shell.
This may be handy for visually impaired users, for various one
click utilities to drive TWRP commands from a computer, for using
TWRP when a catastrophic hardware failure like a shattered screen
prevents you from being able to use touch, or even on devices like
a TV stick where touch and USB mouse input is unavailable.
This patch also includes a few minor changes to openrecoveryscript
including proper support for rebooting via the script and for
decrypting the device via the command line.
Change-Id: I796ad168efdd2da9c25334ac93d1079daaa7b0bc
|
|
This is by no means comprehensive, but is quite a bit better already.
Change-Id: Ibc8654a5dfb0eec39cbd0b64bdb52bb4fbfe2f7e
|
|
Change-Id: I3d6cc65a83b7da9428adf37804cf9cbd0df99492
Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
|
|
Makes a smaller TWRP
Uses mksh for shell
Change-Id: If78d7745dda8919fcb2e9c9b60c6696063c14114
|
|
Change-Id: I0f450357595e7f5f56a7c120b899101faf7f6360
|
|
Change-Id: I7efdba5cf4addf0036ea04ab76a8ecc2c3456e2a
|
|
Build special limited toolbox with SELinux tools for recovery
Change-Id: Ifc76a6bd0468a72081f15ede2a68adf48af8a0f2
|
|
Build special limited toolbox with SELinux tools for recovery
Change-Id: Ifc76a6bd0468a72081f15ede2a68adf48af8a0f2
|
|
|
|
Change-Id: Ib7f882db8a8c61d1156c03468208205124132b6c
|
|
|
|
Need to add this to your source tree:
https://github.com/razrqcom-dev-team/android_external_f2fs-tools
Change-Id: I3ee9ebbb617259655518f8ea356ce7b8c246cd4d
|
|
Change-Id: I11e1a3d018d921d96ba08915925b14bf633be6ed
|
|
Change-Id: I94979806935546fa40a87611be5185c14b557377
|
|
|
|
|
|
Also includes features merged from:
Update twrpTar by kokotas
Revised function entryExists().
Added function to get archive's uncompressed size.
Added option to exclude item(s) from the archive.
Revised forks()
http://review.teamw.in/#/c/590/
Change-Id: I01fa2c81643161984eff2625247af75990684bd9
|
|
|
|
Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
Change-Id: Ic5d44314f501341140dd7059d1cb753341f5844c
|
|
Improves license compatibility between GPL and Apache
Change-Id: I2b165aa575bb6213af6b07936f99610c113443f0
|
|
Also fix build problems with libblkid in CM7
Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
Change-Id: I1cd4573e25b247171e4bd8cc05b70543f897a454
|
|
For some reason fakeflash doesn't like to have superuser/su
in /res, move it to its own subdir in /supersu. This allows
a fakeflash zip built with 'make recoveryzip' to work correctly.
Change-Id: I32e2e0f6dba55281d5c917e931c3ef0034964bcb
|
|
Also fix sort order for file selector by date and file sizes
Change-Id: Idff9fe4232c19d4ed1082e78fabe6f921aa0a114
|
|
Move Exec_Cmd to libcrecovery __popen
Provide opt out build flag for exFAT
Default fstype to exfat on external storage if exfat support is
present and fstype is vfat or auto
Fix invalid unmount errors
Improve handling of unencrypted sdcards on Samsung devices
|
|
update exfat_fuse to newest updates
Always compile mkexfatfs
|
|
|
|
|
|
Add proper mkdosfs tool
Add fuse to TWRP
Add experimental exfat-fuse to TWRP
Convert all system() functions to use new Exec_Cmd function
|
|
Change-Id: I418680e59372160dabfe3e2d5f0208229aa151ae
|
|
|
|
|
|
|
|
|
|
Also redirect stderr output on terminal commands for display in
GUI console
|
|
Fixed a problem with using make_ext4fs by making its lib
a dynamic lib.
Added ADB sideload zip install feature - no way to cancel it yet.
Improve backup and restore code.
|
|
Remove mincrypt source from TWRP and add rule to make
libmincrypt as a shared library.
No more crashes during zip signature verification and
less code to maintain in TWRP.
|
|
Zip install works, had to move mincrypt code into TWRP to prevent
a crash when checking the zip signature.
Added wipe functions
Made it compile in CM7
Made text show up in console and logging
|
|
Move TW zip install code to C++ so that it can use the
ui->functions.
Bring in mincrypt code to fix a crash during signature
checking.
|
|
Pull in most TWRP sources
Stub out partition management code
Make it compile -- probably will not boot
Kind of a mess but have to start somewhere
|
