diff options
Diffstat (limited to '')
| -rwxr-xr-x | tools/ota/add-data-wipe | 118 | ||||
| -rwxr-xr-x | tools/ota/otatool | 225 |
2 files changed, 0 insertions, 343 deletions
diff --git a/tools/ota/add-data-wipe b/tools/ota/add-data-wipe deleted file mode 100755 index 8d2626ffe..000000000 --- a/tools/ota/add-data-wipe +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# Copyright (C) 2007 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -PROGNAME=`basename $0` - -function cleantmp -{ - if [ ! -z "$TMPDIR" ] - then - rm -rf "$TMPDIR" - TMPDIR= - fi -} - -function println -{ - if [ $# -gt 0 ] - then - echo "$PROGNAME: $@" - fi -} - -function fail -{ - println "$@" - cleantmp - exit 1 -} - -function usage -{ - println "$@" - echo "Usage: $PROGNAME <input file> <output file>" - fail -} - -OTATOOL=`which otatool` -if [ -z "$OTATOOL" ] -then - OTATOOL="`dirname $0`/otatool" - if [ ! -x "$OTATOOL" ] - then - fail "Can't find otatool" - fi -fi - - -if [ $# -ne 2 ] -then - usage -fi - -INFILE="$1" -OUTFILE="$2" - -if [ ! -f "$INFILE" ] -then - fail "$INFILE doesn't exist or isn't a file" -fi - -if [ -z "$OUTFILE" ] -then - usage "Output file not specified" -fi - -if [ -d "$OUTFILE" ] -then - usage "Output file may not be a directory" -fi - -if [ "$INFILE" -ef "$OUTFILE" ] -then - fail "Refusing to use the input file as the output file" -fi - -TMPDIR=`mktemp -d "/tmp/$PROGNAME.XXXXXX"` -if [ $? -ne 0 ] -then - TMPDIR= - fail "Can't create temporary directory" -fi - -ORIGSCRIPT="$TMPDIR/orig" -NEWSCRIPT="$TMPDIR/new" - -"$OTATOOL" --dump-script "$INFILE" | -awk ' - { print } - /^format SYSTEM:$/ { - print "delete_recursive DATA:" - } -' > "$NEWSCRIPT" -if [ $? -ne 0 ] -then - fail "Couldn't modify script" -fi - -"$OTATOOL" --replace-script "$NEWSCRIPT" -o "$OUTFILE" "$INFILE" -if [ $? -ne 0 ] -then - fail "Couldn't replace script" -fi - -cleantmp diff --git a/tools/ota/otatool b/tools/ota/otatool deleted file mode 100755 index 4b02629e2..000000000 --- a/tools/ota/otatool +++ /dev/null @@ -1,225 +0,0 @@ -#!/bin/bash -# -# Copyright (C) 2007 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -PROGNAME=`basename "$0"` - -INSTALL_SCRIPT_NAME=META-INF/com/android/update-script - -function cleantmp -{ - if [ ! -z "$TMPDIR" ] - then - rm -rf "$TMPDIR" - TMPDIR= - fi -} - -function println -{ - if [ $# -gt 0 ] - then - echo "$PROGNAME: $@" - fi -} - -function fail -{ - println "$@" - cleantmp - exit 1 -} - -function usage -{ - println "$@" - echo "Usage: $PROGNAME <command> [command-options] <ota-file>" - echo " Where <command> is one of:" - echo " --dump" - echo " Dump a description of the ota file" - echo " --dump-script" - echo " Dumps the install script to standard out" - echo " --append-script <file> -o|--output <outfile>" - echo " Append the contents of <file> to the install script" - echo " --replace-script <file> -o|--output <outfile>" - echo " Replace the install script with the contents of <file>" - fail -} - -if [ $# -lt 2 ] -then - usage -fi -CMD="$1" -shift -if [ "$CMD" = --dump ] -then - CMD_DUMP=1 - UNPACK_FILE=1 -elif [ "$CMD" = --dump-script ] -then - CMD_DUMP_SCRIPT=1 -elif [ "$CMD" = --append-script ] -then - CMD_APPEND_SCRIPT=1 - SCRIPT_FILE=$1 - shift - NEEDS_SCRIPT_FILE=1 - NEEDS_OUTPUT=1 -elif [ "$CMD" = --replace-script ] -then - CMD_REPLACE_SCRIPT=1 - SCRIPT_FILE=$1 - shift - NEEDS_SCRIPT_FILE=1 - NEEDS_OUTPUT=1 -else - usage "Unknown command $CMD" -fi - -if [ ! -z "$NEED_SCRIPT_FILE" ] -then - if [ -z "$SCRIPT_FILE" -o ! -f "$SCRIPT_FILE" ] - then - usage "$CMD requires a valid script file" - fi -fi - -if [ ! -z "$NEEDS_OUTPUT" ] -then - if [ "x$1" != "x-o" -a "x$1" != "x--output" ] - then - usage "$CMD requires \"-o <file>\" or \"--output <file>\"" - fi - shift - - OUTFILE="$1" - shift - if [ -z "$OUTFILE" ] - then - usage "$CMD requires \"-o <file>\" or \"--output <file>\"" - fi - if [ -d "$OUTFILE" ] - then - fail "Output file \"$OUTFILE\" is a directory" - fi -fi - -FILE="$1" -if [ ! -f "$FILE" ] -then - fail "$FILE doesn't exist or isn't a file" -fi -if [ ! -z "$OUTFILE" -a "$FILE" -ef "$OUTFILE" ] -then - fail "Refusing to use the input file as the output file" -fi - -if [ $CMD_DUMP_SCRIPT ] -then - unzip -p "$FILE" "$INSTALL_SCRIPT_NAME" - exit 0 -fi - -# Create a temporary directory for scratch files. -# -TMPDIR=`mktemp -d /tmp/$PROGNAME.XXXXXX` -if [ $? -ne 0 ] -then - TMPDIR= - fail "Can't create temporary directory" -fi - - -if [ $UNPACK_FILE ] -then - ROOTDIR="$TMPDIR/root" - mkdir -p "$ROOTDIR" - - println "Unpacking `basename $FILE`..." - - unzip -q -d "$ROOTDIR" "$FILE" - if [ $? -ne 0 ] - then - fail "Couldn't unpack $FILE" - fi -fi - - -if [ $CMD_DUMP ] -then - function dumpfile - { - echo "BEGIN `basename $1`" - cat "$1" | sed -e 's/^/ /' - echo "END `basename $1`" - } - - echo Contents of root: - ls -1 "$ROOTDIR" | sed -e 's/^/ /' - echo - echo Contents of META-INF: - (cd "$ROOTDIR" && find META-INF -type f) | sed -e 's/^/ /' - - echo - dumpfile "$ROOTDIR/META-INF/MANIFEST.MF" - echo - dumpfile "$ROOTDIR/$INSTALL_SCRIPT_NAME" - echo - dumpfile "$ROOTDIR/android-product.txt" - echo - dumpfile "$ROOTDIR/system/build.prop" -fi - -if [ $CMD_APPEND_SCRIPT ] -then - TMPSCRIPT="$TMPDIR/script" - NEWSCRIPT="$TMPDIR/$INSTALL_SCRIPT_NAME" - unzip -p "$FILE" "$INSTALL_SCRIPT_NAME" > "$TMPSCRIPT" - if [ $? -ne 0 ] - then - fail "Couldn't extract $INSTALL_SCRIPT_NAME from $FILE" - fi - mkdir -p `dirname "$NEWSCRIPT"` - cat "$TMPSCRIPT" "$SCRIPT_FILE" > "$NEWSCRIPT" - - OVERWRITE_SCRIPT=1 -fi - -if [ $CMD_REPLACE_SCRIPT ] -then - NEWSCRIPT="$TMPDIR/$INSTALL_SCRIPT_NAME" - mkdir -p `dirname "$NEWSCRIPT"` - cp "$SCRIPT_FILE" "$NEWSCRIPT" - - OVERWRITE_SCRIPT=1 -fi - -if [ $OVERWRITE_SCRIPT ] -then - cp "$FILE" "$TMPDIR/outfile.zip" - (cd "$TMPDIR" && zip -qu outfile.zip "$INSTALL_SCRIPT_NAME") - if [ $? -ne 0 ] - then - fail "Couldn't add new $INSTALL_SCRIPT_NAME to output file" - fi - - rm -f "$OUTFILE" - mkdir -p `dirname "$OUTFILE"` - mv "$TMPDIR/outfile.zip" "$OUTFILE" -fi - -cleantmp |