diff options
Diffstat (limited to 'install.cpp')
-rw-r--r-- | install.cpp | 314 |
1 files changed, 314 insertions, 0 deletions
diff --git a/install.cpp b/install.cpp new file mode 100644 index 000000000..482e0d755 --- /dev/null +++ b/install.cpp @@ -0,0 +1,314 @@ +/* + * Copyright (C) 2007 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <limits.h> +#include <sys/stat.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "common.h" +#include "install.h" +#include "mincrypt/rsa.h" +#include "minui/minui.h" +#include "minzip/SysUtil.h" +#include "minzip/Zip.h" +#include "mtdutils/mounts.h" +#include "mtdutils/mtdutils.h" +#include "roots.h" +#include "verifier.h" +#include "ui.h" + +#define ASSUMED_UPDATE_BINARY_NAME "META-INF/com/google/android/update-binary" +#define PUBLIC_KEYS_FILE "/res/keys" + +// If the package contains an update binary, extract it and run it. +static int +try_update_binary(const char *path, ZipArchive *zip, int* wipe_cache) { + const ZipEntry* binary_entry = + mzFindZipEntry(zip, ASSUMED_UPDATE_BINARY_NAME); + if (binary_entry == NULL) { + mzCloseZipArchive(zip); + return INSTALL_CORRUPT; + } + + const char* binary = "/tmp/update_binary"; + unlink(binary); + int fd = creat(binary, 0755); + if (fd < 0) { + mzCloseZipArchive(zip); + LOGE("Can't make %s\n", binary); + return INSTALL_ERROR; + } + bool ok = mzExtractZipEntryToFile(zip, binary_entry, fd); + close(fd); + mzCloseZipArchive(zip); + + if (!ok) { + LOGE("Can't copy %s\n", ASSUMED_UPDATE_BINARY_NAME); + return INSTALL_ERROR; + } + + int pipefd[2]; + pipe(pipefd); + + // When executing the update binary contained in the package, the + // arguments passed are: + // + // - the version number for this interface + // + // - an fd to which the program can write in order to update the + // progress bar. The program can write single-line commands: + // + // progress <frac> <secs> + // fill up the next <frac> part of of the progress bar + // over <secs> seconds. If <secs> is zero, use + // set_progress commands to manually control the + // progress of this segment of the bar + // + // set_progress <frac> + // <frac> should be between 0.0 and 1.0; sets the + // progress bar within the segment defined by the most + // recent progress command. + // + // firmware <"hboot"|"radio"> <filename> + // arrange to install the contents of <filename> in the + // given partition on reboot. + // + // (API v2: <filename> may start with "PACKAGE:" to + // indicate taking a file from the OTA package.) + // + // (API v3: this command no longer exists.) + // + // ui_print <string> + // display <string> on the screen. + // + // - the name of the package zip file. + // + + const char** args = (const char**)malloc(sizeof(char*) * 5); + args[0] = binary; + args[1] = EXPAND(RECOVERY_API_VERSION); // defined in Android.mk + char* temp = (char*)malloc(10); + sprintf(temp, "%d", pipefd[1]); + args[2] = temp; + args[3] = (char*)path; + args[4] = NULL; + + pid_t pid = fork(); + if (pid == 0) { + close(pipefd[0]); + execv(binary, (char* const*)args); + fprintf(stdout, "E:Can't run %s (%s)\n", binary, strerror(errno)); + _exit(-1); + } + close(pipefd[1]); + + *wipe_cache = 0; + + char buffer[1024]; + FILE* from_child = fdopen(pipefd[0], "r"); + while (fgets(buffer, sizeof(buffer), from_child) != NULL) { + char* command = strtok(buffer, " \n"); + if (command == NULL) { + continue; + } else if (strcmp(command, "progress") == 0) { + char* fraction_s = strtok(NULL, " \n"); + char* seconds_s = strtok(NULL, " \n"); + + float fraction = strtof(fraction_s, NULL); + int seconds = strtol(seconds_s, NULL, 10); + + ui_show_progress(fraction * (1-VERIFICATION_PROGRESS_FRACTION), + seconds); + } else if (strcmp(command, "set_progress") == 0) { + char* fraction_s = strtok(NULL, " \n"); + float fraction = strtof(fraction_s, NULL); + ui_set_progress(fraction); + } else if (strcmp(command, "ui_print") == 0) { + char* str = strtok(NULL, "\n"); + if (str) { + ui_print("%s", str); + } else { + ui_print("\n"); + } + } else if (strcmp(command, "wipe_cache") == 0) { + *wipe_cache = 1; + } else { + LOGE("unknown command [%s]\n", command); + } + } + fclose(from_child); + + int status; + waitpid(pid, &status, 0); + if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) { + LOGE("Error in %s\n(Status %d)\n", path, WEXITSTATUS(status)); + return INSTALL_ERROR; + } + + return INSTALL_SUCCESS; +} + +// Reads a file containing one or more public keys as produced by +// DumpPublicKey: this is an RSAPublicKey struct as it would appear +// as a C source literal, eg: +// +// "{64,0xc926ad21,{1795090719,...,-695002876},{-857949815,...,1175080310}}" +// +// (Note that the braces and commas in this example are actual +// characters the parser expects to find in the file; the ellipses +// indicate more numbers omitted from this example.) +// +// The file may contain multiple keys in this format, separated by +// commas. The last key must not be followed by a comma. +// +// Returns NULL if the file failed to parse, or if it contain zero keys. +static RSAPublicKey* +load_keys(const char* filename, int* numKeys) { + RSAPublicKey* out = NULL; + *numKeys = 0; + + FILE* f = fopen(filename, "r"); + if (f == NULL) { + LOGE("opening %s: %s\n", filename, strerror(errno)); + goto exit; + } + + { + int i; + bool done = false; + while (!done) { + ++*numKeys; + out = (RSAPublicKey*)realloc(out, *numKeys * sizeof(RSAPublicKey)); + RSAPublicKey* key = out + (*numKeys - 1); + if (fscanf(f, " { %i , 0x%x , { %u", + &(key->len), &(key->n0inv), &(key->n[0])) != 3) { + goto exit; + } + if (key->len != RSANUMWORDS) { + LOGE("key length (%d) does not match expected size\n", key->len); + goto exit; + } + for (i = 1; i < key->len; ++i) { + if (fscanf(f, " , %u", &(key->n[i])) != 1) goto exit; + } + if (fscanf(f, " } , { %u", &(key->rr[0])) != 1) goto exit; + for (i = 1; i < key->len; ++i) { + if (fscanf(f, " , %u", &(key->rr[i])) != 1) goto exit; + } + fscanf(f, " } } "); + + // if the line ends in a comma, this file has more keys. + switch (fgetc(f)) { + case ',': + // more keys to come. + break; + + case EOF: + done = true; + break; + + default: + LOGE("unexpected character between keys\n"); + goto exit; + } + } + } + + fclose(f); + return out; + +exit: + if (f) fclose(f); + free(out); + *numKeys = 0; + return NULL; +} + +static int +really_install_package(const char *path, int* wipe_cache) +{ + ui_set_background(BACKGROUND_ICON_INSTALLING); + ui_print("Finding update package...\n"); + ui_show_indeterminate_progress(); + LOGI("Update location: %s\n", path); + + if (ensure_path_mounted(path) != 0) { + LOGE("Can't mount %s\n", path); + return INSTALL_CORRUPT; + } + + ui_print("Opening update package...\n"); + + int numKeys; + RSAPublicKey* loadedKeys = load_keys(PUBLIC_KEYS_FILE, &numKeys); + if (loadedKeys == NULL) { + LOGE("Failed to load keys\n"); + return INSTALL_CORRUPT; + } + LOGI("%d key(s) loaded from %s\n", numKeys, PUBLIC_KEYS_FILE); + + // Give verification half the progress bar... + ui_print("Verifying update package...\n"); + ui_show_progress( + VERIFICATION_PROGRESS_FRACTION, + VERIFICATION_PROGRESS_TIME); + + int err; + err = verify_file(path, loadedKeys, numKeys); + free(loadedKeys); + LOGI("verify_file returned %d\n", err); + if (err != VERIFY_SUCCESS) { + LOGE("signature verification failed\n"); + return INSTALL_CORRUPT; + } + + /* Try to open the package. + */ + ZipArchive zip; + err = mzOpenZipArchive(path, &zip); + if (err != 0) { + LOGE("Can't open %s\n(%s)\n", path, err != -1 ? strerror(err) : "bad"); + return INSTALL_CORRUPT; + } + + /* Verify and install the contents of the package. + */ + ui_print("Installing update...\n"); + return try_update_binary(path, &zip, wipe_cache); +} + +int +install_package(const char* path, int* wipe_cache, const char* install_file) +{ + FILE* install_log = fopen_path(install_file, "w"); + if (install_log) { + fputs(path, install_log); + fputc('\n', install_log); + } else { + LOGE("failed to open last_install: %s\n", strerror(errno)); + } + int result = really_install_package(path, wipe_cache); + if (install_log) { + fputc(result == INSTALL_SUCCESS ? '1' : '0', install_log); + fputc('\n', install_log); + fclose(install_log); + } + return result; +} |