summaryrefslogtreecommitdiffstats
path: root/gui
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--gui/action.cpp44
-rw-r--r--gui/gui.cpp161
-rw-r--r--gui/gui.h1
-rw-r--r--gui/objects.hpp1
-rw-r--r--gui/pages.cpp28
-rw-r--r--gui/pages.hpp6
6 files changed, 68 insertions, 173 deletions
diff --git a/gui/action.cpp b/gui/action.cpp
index 20944dac7..081e2d134 100644
--- a/gui/action.cpp
+++ b/gui/action.cpp
@@ -226,6 +226,7 @@ GUIAction::GUIAction(xml_node<>* node)
ADD_ACTION(resize);
ADD_ACTION(changefilesystem);
ADD_ACTION(flashimage);
+ ADD_ACTION(twcmd);
}
// First, get the action
@@ -522,7 +523,6 @@ int GUIAction::reboot(std::string arg)
int GUIAction::home(std::string arg __unused)
{
- PageManager::SelectPackage("TWRP");
gui_changePage("main");
return 0;
}
@@ -1536,41 +1536,12 @@ int GUIAction::adbsideloadcancel(std::string arg __unused)
int GUIAction::openrecoveryscript(std::string arg __unused)
{
- int op_status = 1;
-
operation_start("OpenRecoveryScript");
if (simulate) {
simulate_progress_bar();
operation_end(0);
} else {
- // Check for the SCRIPT_FILE_TMP first as these are AOSP recovery commands
- // that we converted to ORS commands during boot in recovery.cpp.
- // Run those first.
- int reboot = 0;
- if (TWFunc::Path_Exists(SCRIPT_FILE_TMP)) {
- gui_msg("running_recovery_commands=Running Recovery Commands");
- if (OpenRecoveryScript::run_script_file() == 0) {
- reboot = 1;
- op_status = 0;
- }
- }
- // Check for the ORS file in /cache and attempt to run those commands.
- if (OpenRecoveryScript::check_for_script_file()) {
- gui_msg("running_ors=Running OpenRecoveryScript");
- if (OpenRecoveryScript::run_script_file() == 0) {
- reboot = 1;
- op_status = 0;
- }
- }
- if (reboot) {
- // Disable stock recovery reflashing
- TWFunc::Disable_Stock_Recovery_Replace();
- usleep(2000000); // Sleep for 2 seconds before rebooting
- TWFunc::tw_reboot(rb_system);
- usleep(5000000); // Sleep for 5 seconds to allow reboot to occur
- } else {
- DataManager::SetValue("tw_page_done", 1);
- }
+ int op_status = OpenRecoveryScript::Run_OpenRecoveryScript_Action();
operation_end(op_status);
}
return 0;
@@ -1743,6 +1714,17 @@ int GUIAction::flashimage(std::string arg __unused)
return 0;
}
+int GUIAction::twcmd(std::string arg)
+{
+ operation_start("TWRP CLI Command");
+ if (simulate)
+ simulate_progress_bar();
+ else
+ OpenRecoveryScript::Run_CLI_Command(arg.c_str());
+ operation_end(0);
+ return 0;
+}
+
int GUIAction::getKeyByName(std::string key)
{
if (key == "home") return KEY_HOME;
diff --git a/gui/gui.cpp b/gui/gui.cpp
index 78e8a7e0c..63baeee92 100644
--- a/gui/gui.cpp
+++ b/gui/gui.cpp
@@ -69,12 +69,11 @@ using namespace rapidxml;
// Global values
static gr_surface gCurtain = NULL;
static int gGuiInitialized = 0;
-static TWAtomicInt gGuiConsoleRunning;
-static TWAtomicInt gGuiConsoleTerminate;
static TWAtomicInt gForceRender;
const int gNoAnimation = 1;
blanktimer blankTimer;
int ors_read_fd = -1;
+static FILE* orsout = NULL;
static float scale_theme_w = 1;
static float scale_theme_h = 1;
@@ -493,13 +492,28 @@ static void setup_ors_command()
}
}
+// callback called after a CLI command was executed
+static void ors_command_done()
+{
+ gui_set_FILE(NULL);
+ fclose(orsout);
+ orsout = NULL;
+
+ if (DataManager::GetIntValue("tw_page_done") == 0) {
+ // The select function will return ready to read and the
+ // read function will return errno 19 no such device unless
+ // we set everything up all over again.
+ close(ors_read_fd);
+ setup_ors_command();
+ }
+}
+
static void ors_command_read()
{
- FILE* orsout;
- char command[1024], result[512];
- int set_page_done = 0, read_ret = 0;
+ char command[1024];
+ int read_ret = read(ors_read_fd, &command, sizeof(command));
- if ((read_ret = read(ors_read_fd, &command, sizeof(command))) > 0) {
+ if (read_ret > 0) {
command[1022] = '\n';
command[1023] = '\0';
LOGINFO("Command '%s' received\n", command);
@@ -513,61 +527,40 @@ static void ors_command_read()
return;
}
if (DataManager::GetIntValue("tw_busy") != 0) {
- strcpy(result, "Failed, operation in progress\n");
- fprintf(orsout, "%s", result);
+ fputs("Failed, operation in progress\n", orsout);
LOGINFO("Command cannot be performed, operation in progress.\n");
+ fclose(orsout);
} else {
if (strlen(command) == 11 && strncmp(command, "dumpstrings", 11) == 0) {
- // This cannot be done safely with gui_console_only because gui_console_only updates mCurrentSet
- // which makes the resources that we are trying to read unreachable.
gui_set_FILE(orsout);
PageManager::GetResources()->DumpStrings();
- gui_set_FILE(NULL);
- } else if (gui_console_only() == 0) {
- LOGINFO("Console started successfully\n");
+ ors_command_done();
+ } else {
+ // mirror output messages
gui_set_FILE(orsout);
- if (strlen(command) > 11 && strncmp(command, "runscript", 9) == 0) {
- char* filename = command + 11;
- if (OpenRecoveryScript::copy_script_file(filename) == 0) {
- LOGINFO("Unable to copy script file\n");
- } else {
- OpenRecoveryScript::run_script_file();
- }
- } else if (strlen(command) > 5 && strncmp(command, "get", 3) == 0) {
- char* varname = command + 4;
- string temp;
- DataManager::GetValue(varname, temp);
- gui_print("%s = %s\n", varname, temp.c_str());
- } else if (strlen(command) > 9 && strncmp(command, "decrypt", 7) == 0) {
- char* pass = command + 8;
- gui_msg("decrypt_cmd=Attempting to decrypt data partition via command line.");
- if (PartitionManager.Decrypt_Device(pass) == 0) {
- set_page_done = 1;
- }
- } else if (OpenRecoveryScript::Insert_ORS_Command(command)) {
- OpenRecoveryScript::run_script_file();
- }
- gui_set_FILE(NULL);
- gGuiConsoleTerminate.set_value(1);
+ // close orsout and restart listener after command is done
+ OpenRecoveryScript::Call_After_CLI_Command(ors_command_done);
+ // run the command in a threaded action...
+ DataManager::SetValue("tw_action", "twcmd");
+ DataManager::SetValue("tw_action_param", command);
+ // ...and switch back to the current page when finished
+ std::string currentPage = PageManager::GetCurrentPage();
+ DataManager::SetValue("tw_has_action2", "1");
+ DataManager::SetValue("tw_action2", "page");
+ DataManager::SetValue("tw_action2_param", currentPage);
+ DataManager::SetValue("tw_action_text1", gui_lookup("running_recovery_commands", "Running Recovery Commands"));
+ DataManager::SetValue("tw_action_text2", "");
+ gui_changePage("singleaction_page");
+ // now immediately return to the GUI main loop (the action runs in the background thread)
+ // put all things that need to be done after the command is finished into ors_command_done, not here
}
}
- fclose(orsout);
- LOGINFO("Done reading ORS command from command line\n");
- if (set_page_done) {
- DataManager::SetValue("tw_page_done", 1);
- } else {
- // The select function will return ready to read and the
- // read function will return errno 19 no such device unless
- // we set everything up all over again.
- close(ors_read_fd);
- setup_ors_command();
- }
} else {
LOGINFO("ORS command line read returned an error: %i, %i, %s\n", read_ret, errno, strerror(errno));
}
- return;
}
+// Get and dispatch input events until it's time to draw the next frame
// This special function will return immediately the first time, but then
// always returns 1/30th of a second (or immediately if called later) from
// the last time it was called
@@ -648,7 +641,7 @@ static int runPages(const char *page_name, const int stop_on_page_done)
{
loopTimer(input_timeout_ms);
#ifndef TW_OEM_BUILD
- if (ors_read_fd > 0) {
+ if (ors_read_fd > 0 && !orsout) { // orsout is non-NULL if a command is still running
FD_ZERO(&fdset);
FD_SET(ors_read_fd, &fdset);
timeout.tv_sec = 0;
@@ -660,10 +653,6 @@ static int runPages(const char *page_name, const int stop_on_page_done)
}
#endif
- if (gGuiConsoleRunning.get_value()) {
- continue;
- }
-
if (!gForceRender.get_value())
{
int ret = PageManager::Update();
@@ -748,13 +737,6 @@ int gui_changeOverlay(std::string overlay)
return 0;
}
-int gui_changePackage(std::string newPackage)
-{
- PageManager::SelectPackage(newPackage);
- gForceRender.set_value(1);
- return 0;
-}
-
std::string gui_parse_text(std::string str)
{
// This function parses text for DataManager values encompassed by %value% in the XML
@@ -957,11 +939,6 @@ extern "C" int gui_startPage(const char *page_name, const int allow_commands, in
if (!gGuiInitialized)
return -1;
- gGuiConsoleTerminate.set_value(1);
-
- while (gGuiConsoleRunning.get_value())
- usleep(10000);
-
// Set the default package
PageManager::SelectPackage("TWRP");
@@ -981,60 +958,6 @@ extern "C" int gui_startPage(const char *page_name, const int allow_commands, in
return runPages(page_name, stop_on_page_done);
}
-static void * console_thread(void *cookie __unused)
-{
- PageManager::SwitchToConsole();
-
- while (!gGuiConsoleTerminate.get_value())
- {
- loopTimer(0);
-
- if (!gForceRender.get_value())
- {
- int ret;
-
- ret = PageManager::Update();
- if (ret > 1)
- PageManager::Render();
-
- if (ret > 0)
- flip();
-
- if (ret < 0)
- LOGERR("An update request has failed.\n");
- }
- else
- {
- gForceRender.set_value(0);
- PageManager::Render();
- flip();
- }
- }
- gGuiConsoleRunning.set_value(0);
- gForceRender.set_value(1); // this will kickstart the GUI to render again
- PageManager::EndConsole();
- LOGINFO("Console stopping\n");
- return NULL;
-}
-
-extern "C" int gui_console_only(void)
-{
- if (!gGuiInitialized)
- return -1;
-
- gGuiConsoleTerminate.set_value(0);
-
- if (gGuiConsoleRunning.get_value())
- return 0;
-
- gGuiConsoleRunning.set_value(1);
-
- // Start by spinning off an input handler.
- pthread_t t;
- pthread_create(&t, NULL, console_thread, NULL);
-
- return 0;
-}
extern "C" void set_scale_values(float w, float h)
{
diff --git a/gui/gui.h b/gui/gui.h
index f6f0483a4..034f1cd92 100644
--- a/gui/gui.h
+++ b/gui/gui.h
@@ -21,7 +21,6 @@
#include <stdio.h>
-int gui_console_only();
int gui_init();
int gui_loadResources();
int gui_loadCustomResources();
diff --git a/gui/objects.hpp b/gui/objects.hpp
index 438905b96..ebf08a8db 100644
--- a/gui/objects.hpp
+++ b/gui/objects.hpp
@@ -366,6 +366,7 @@ protected:
int checkpartitionlifetimewrites(std::string arg);
int mountsystemtoggle(std::string arg);
int setlanguage(std::string arg);
+ int twcmd(std::string arg);
int simulate;
};
diff --git a/gui/pages.cpp b/gui/pages.cpp
index 13f3bd7b5..4a65c69e4 100644
--- a/gui/pages.cpp
+++ b/gui/pages.cpp
@@ -1098,6 +1098,11 @@ int PageSet::IsCurrentPage(Page* page)
return ((mCurrentPage && mCurrentPage == page) ? 1 : 0);
}
+std::string PageSet::GetCurrentPage() const
+{
+ return mCurrentPage ? mCurrentPage->GetName() : "";
+}
+
int PageSet::Render(void)
{
int ret;
@@ -1544,6 +1549,11 @@ int PageManager::ChangePage(std::string name)
return ret;
}
+std::string PageManager::GetCurrentPage()
+{
+ return mCurrentSet ? mCurrentSet->GetCurrentPage() : "";
+}
+
int PageManager::ChangeOverlay(std::string name)
{
if (name.empty())
@@ -1560,24 +1570,6 @@ const ResourceManager* PageManager::GetResources()
return (mCurrentSet ? mCurrentSet->GetResources() : NULL);
}
-int PageManager::SwitchToConsole(void)
-{
- PageSet* console = new PageSet(NULL);
-
- mCurrentSet = console;
- return 0;
-}
-
-int PageManager::EndConsole(void)
-{
- if (mCurrentSet && mBaseSet) {
- delete mCurrentSet;
- mCurrentSet = mBaseSet;
- return 0;
- }
- return -1;
-}
-
int PageManager::IsCurrentPage(Page* page)
{
return (mCurrentSet ? mCurrentSet->IsCurrentPage(page) : 0);
diff --git a/gui/pages.hpp b/gui/pages.hpp
index 5dcc9e0b5..e7ad55e94 100644
--- a/gui/pages.hpp
+++ b/gui/pages.hpp
@@ -101,6 +101,7 @@ public:
// Helper routine for identifing if we're the current page
int IsCurrentPage(Page* page);
+ std::string GetCurrentPage() const;
// These are routing routines
int Render(void);
@@ -144,10 +145,7 @@ public:
static int ChangePage(std::string name);
static int ChangeOverlay(std::string name);
static const ResourceManager* GetResources();
-
- // Used for console-only mode
- static int SwitchToConsole(void);
- static int EndConsole(void);
+ static std::string GetCurrentPage();
// Helper to identify if a particular page is the active page
static int IsCurrentPage(Page* page);