summaryrefslogtreecommitdiffstats
path: root/libblkid/probe.c
diff options
context:
space:
mode:
authorbigbiff <bigbiff@teamw.in>2015-01-02 01:44:14 +0100
committerDees Troy <dees_troy@teamw.in>2015-01-05 04:38:42 +0100
commit7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de (patch)
treefb69cb515cb4ab675d5850684cc402100b7a2a22 /libblkid/probe.c
parentcrypto: remove unused libs and clean up makefile (diff)
downloadandroid_bootable_recovery-7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de.tar
android_bootable_recovery-7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de.tar.gz
android_bootable_recovery-7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de.tar.bz2
android_bootable_recovery-7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de.tar.lz
android_bootable_recovery-7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de.tar.xz
android_bootable_recovery-7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de.tar.zst
android_bootable_recovery-7b4c7a681cc4c0a53dc8a8baf4853e921cfbf5de.zip
Diffstat (limited to 'libblkid/probe.c')
-rw-r--r--libblkid/probe.c1779
1 files changed, 0 insertions, 1779 deletions
diff --git a/libblkid/probe.c b/libblkid/probe.c
deleted file mode 100644
index 77e8b860c..000000000
--- a/libblkid/probe.c
+++ /dev/null
@@ -1,1779 +0,0 @@
-/*
- * Low-level libblkid probing API
- *
- * Copyright (C) 2008-2009 Karel Zak <kzak@redhat.com>
- *
- * This file may be redistributed under the terms of the
- * GNU Lesser General Public License.
- */
-
-/**
- * SECTION: lowprobe
- * @title: Low-level probing
- * @short_description: low-level prober initialization
- *
- * The low-level probing routines always and directly read information from
- * the selected (see blkid_probe_set_device()) device.
- *
- * The probing routines are grouped together into separate chains. Currently,
- * the library provides superblocks, partitions and topology chains.
- *
- * The probing routines is possible to filter (enable/disable) by type (e.g.
- * fstype "vfat" or partype "gpt") or by usage flags (e.g. BLKID_USAGE_RAID).
- * These filters are per-chain. Note that always when you touch the chain
- * filter the current probing position is reset and probing starts from
- * scratch. It means that the chain filter should not be modified during
- * probing, for example in loop where you call blkid_do_probe().
- *
- * For more details see the chain specific documentation.
- *
- * The low-level API provides two ways how access to probing results.
- *
- * 1. The NAME=value (tag) interface. This interface is older and returns all data
- * as strings. This interface is generic for all chains.
- *
- * 2. The binary interfaces. These interfaces return data in the native formats.
- * The interface is always specific to the probing chain.
- *
- * Note that the previous probing result (binary or NAME=value) is always
- * zeroized when a chain probing function is called. For example:
- *
- * <informalexample>
- * <programlisting>
- * blkid_probe_enable_partitions(pr, TRUE);
- * blkid_probe_enable_superblocks(pr, FALSE);
- *
- * blkid_do_safeprobe(pr);
- * </programlisting>
- * </informalexample>
- *
- * overwrites the previous probing result for the partitions chain, the superblocks
- * result is not modified.
- */
-
-/**
- * SECTION: lowprobe-tags
- * @title: Low-level tags
- * @short_description: generic NAME=value interface.
- *
- * The probing routines inside the chain are mutually exclusive by default --
- * only few probing routines are marked as "tolerant". The "tolerant" probing
- * routines are used for filesystem which can share the same device with any
- * other filesystem. The blkid_do_safeprobe() checks for the "tolerant" flag.
- *
- * The SUPERBLOCKS chain is enabled by default. The all others chains is
- * necessary to enable by blkid_probe_enable_'CHAINNAME'(). See chains specific
- * documentation.
- *
- * The blkid_do_probe() function returns a result from only one probing
- * routine, and the next call from the next probing routine. It means you need
- * to call the function in loop, for example:
- *
- * <informalexample>
- * <programlisting>
- * while((blkid_do_probe(pr) == 0)
- * ... use result ...
- * </programlisting>
- * </informalexample>
- *
- * The blkid_do_safeprobe() is the same as blkid_do_probe(), but returns only
- * first probing result for every enabled chain. This function checks for
- * ambivalent results (e.g. more "intolerant" filesystems superblocks on the
- * device).
- *
- * The probing result is set of NAME=value pairs (the NAME is always unique).
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <sys/types.h>
-#ifdef HAVE_LINUX_CDROM_H
-#include <linux/cdrom.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-#include <sys/stat.h>
-#endif
-#ifdef HAVE_ERRNO_H
-#include <errno.h>
-#endif
-#include <inttypes.h>
-#include <stdint.h>
-#include <stdarg.h>
-
-#ifdef HAVE_LIBUUID
-# include <uuid.h>
-#endif
-
-#include "blkidP.h"
-#include "all-io.h"
-
-/* chains */
-extern const struct blkid_chaindrv superblocks_drv;
-extern const struct blkid_chaindrv topology_drv;
-extern const struct blkid_chaindrv partitions_drv;
-
-/*
- * All supported chains
- */
-static const struct blkid_chaindrv *chains_drvs[] = {
- [BLKID_CHAIN_SUBLKS] = &superblocks_drv,
- [BLKID_CHAIN_TOPLGY] = &topology_drv,
- [BLKID_CHAIN_PARTS] = &partitions_drv
-};
-
-static void blkid_probe_reset_vals(blkid_probe pr);
-static void blkid_probe_reset_buffer(blkid_probe pr);
-
-/**
- * blkid_new_probe:
- *
- * Returns: a pointer to the newly allocated probe struct or NULL in case of error.
- */
-blkid_probe blkid_new_probe(void)
-{
- int i;
- blkid_probe pr;
-
- blkid_init_debug(0);
- pr = calloc(1, sizeof(struct blkid_struct_probe));
- if (!pr)
- return NULL;
-
- DBG(DEBUG_LOWPROBE, printf("allocate a new probe %p\n", pr));
-
- /* initialize chains */
- for (i = 0; i < BLKID_NCHAINS; i++) {
- pr->chains[i].driver = chains_drvs[i];
- pr->chains[i].flags = chains_drvs[i]->dflt_flags;
- pr->chains[i].enabled = chains_drvs[i]->dflt_enabled;
- }
- INIT_LIST_HEAD(&pr->buffers);
- return pr;
-}
-
-/*
- * Clone @parent, the new clone shares all, but except:
- *
- * - probing result
- * - bufferes if another device (or offset) is set to the prober
- */
-blkid_probe blkid_clone_probe(blkid_probe parent)
-{
- blkid_probe pr;
-
- if (!parent)
- return NULL;
-
- DBG(DEBUG_LOWPROBE, printf("allocate a probe clone\n"));
-
- pr = blkid_new_probe();
- if (!pr)
- return NULL;
-
- pr->fd = parent->fd;
- pr->off = parent->off;
- pr->size = parent->size;
- pr->devno = parent->devno;
- pr->disk_devno = parent->disk_devno;
- pr->blkssz = parent->blkssz;
- pr->flags = parent->flags;
- pr->parent = parent;
-
- pr->flags &= ~BLKID_FL_PRIVATE_FD;
-
- return pr;
-}
-
-
-
-/**
- * blkid_new_probe_from_filename:
- * @filename: device or regular file
- *
- * This function is same as call open(filename), blkid_new_probe() and
- * blkid_probe_set_device(pr, fd, 0, 0).
- *
- * The @filename is closed by blkid_free_probe() or by the
- * blkid_probe_set_device() call.
- *
- * Returns: a pointer to the newly allocated probe struct or NULL in case of
- * error.
- */
-blkid_probe blkid_new_probe_from_filename(const char *filename)
-{
- int fd = -1;
- blkid_probe pr = NULL;
-
- if (!filename)
- return NULL;
-
- fd = open(filename, O_RDONLY|O_CLOEXEC);
- if (fd < 0)
- return NULL;
-
- pr = blkid_new_probe();
- if (!pr)
- goto err;
-
- if (blkid_probe_set_device(pr, fd, 0, 0))
- goto err;
-
- pr->flags |= BLKID_FL_PRIVATE_FD;
- return pr;
-err:
- if (fd >= 0)
- close(fd);
- blkid_free_probe(pr);
- return NULL;
-}
-
-/**
- * blkid_free_probe:
- * @pr: probe
- *
- * Deallocates the probe struct, buffers and all allocated
- * data that are associated with this probing control struct.
- */
-void blkid_free_probe(blkid_probe pr)
-{
- int i;
-
- if (!pr)
- return;
-
- for (i = 0; i < BLKID_NCHAINS; i++) {
- struct blkid_chain *ch = &pr->chains[i];
-
- if (ch->driver->free_data)
- ch->driver->free_data(pr, ch->data);
- free(ch->fltr);
- }
-
- if ((pr->flags & BLKID_FL_PRIVATE_FD) && pr->fd >= 0)
- close(pr->fd);
- blkid_probe_reset_buffer(pr);
- blkid_free_probe(pr->disk_probe);
-
- DBG(DEBUG_LOWPROBE, printf("free probe %p\n", pr));
- free(pr);
-}
-
-
-/*
- * Removes chain values from probing result.
- */
-void blkid_probe_chain_reset_vals(blkid_probe pr, struct blkid_chain *chn)
-{
- int nvals = pr->nvals;
- int i, x;
-
- for (x = 0, i = 0; i < pr->nvals; i++) {
- struct blkid_prval *v = &pr->vals[i];
-
- if (v->chain != chn && x == i) {
- x++;
- continue;
- }
- if (v->chain == chn) {
- --nvals;
- continue;
- }
- memcpy(&pr->vals[x++], v, sizeof(struct blkid_prval));
- }
- pr->nvals = nvals;
-}
-
-static void blkid_probe_chain_reset_position(struct blkid_chain *chn)
-{
- if (chn)
- chn->idx = -1;
-}
-
-/*
- * Copies chain values from probing result to @vals, the max size of @vals is
- * @nvals and returns real number of values.
- */
-int blkid_probe_chain_copy_vals(blkid_probe pr, struct blkid_chain *chn,
- struct blkid_prval *vals, int nvals)
-{
- int i, x;
-
- for (x = 0, i = 0; i < pr->nvals && x < nvals; i++) {
- struct blkid_prval *v = &pr->vals[i];
-
- if (v->chain != chn)
- continue;
- memcpy(&vals[x++], v, sizeof(struct blkid_prval));
- }
- return x;
-}
-
-/*
- * Appends values from @vals to the probing result
- */
-void blkid_probe_append_vals(blkid_probe pr, struct blkid_prval *vals, int nvals)
-{
- int i = 0;
-
- while (i < nvals && pr->nvals < BLKID_NVALS) {
- memcpy(&pr->vals[pr->nvals++], &vals[i++],
- sizeof(struct blkid_prval));
- }
-}
-
-static void blkid_probe_reset_vals(blkid_probe pr)
-{
- memset(pr->vals, 0, sizeof(pr->vals));
- pr->nvals = 0;
-}
-
-struct blkid_chain *blkid_probe_get_chain(blkid_probe pr)
-{
- return pr->cur_chain;
-}
-
-void *blkid_probe_get_binary_data(blkid_probe pr, struct blkid_chain *chn)
-{
- int rc, org_prob_flags;
- struct blkid_chain *org_chn;
-
- if (!pr || !chn)
- return NULL;
-
- /* save the current setting -- the binary API has to be completely
- * independent on the current probing status
- */
- org_chn = pr->cur_chain;
- org_prob_flags = pr->prob_flags;
-
- pr->cur_chain = chn;
- pr->prob_flags = 0;
- chn->binary = TRUE;
- blkid_probe_chain_reset_position(chn);
-
- rc = chn->driver->probe(pr, chn);
-
- chn->binary = FALSE;
- blkid_probe_chain_reset_position(chn);
-
- /* restore the original setting
- */
- pr->cur_chain = org_chn;
- pr->prob_flags = org_prob_flags;
-
- if (rc != 0)
- return NULL;
-
- DBG(DEBUG_LOWPROBE,
- printf("returning %s binary data\n", chn->driver->name));
- return chn->data;
-}
-
-
-/**
- * blkid_reset_probe:
- * @pr: probe
- *
- * Zeroize probing results and resets the current probing (this has impact to
- * blkid_do_probe() only). This function does not touch probing filters and
- * keeps assigned device.
- */
-void blkid_reset_probe(blkid_probe pr)
-{
- int i;
-
- if (!pr)
- return;
-
- blkid_probe_reset_vals(pr);
- blkid_probe_set_wiper(pr, 0, 0);
-
- pr->cur_chain = NULL;
-
- for (i = 0; i < BLKID_NCHAINS; i++)
- blkid_probe_chain_reset_position(&pr->chains[i]);
-}
-
-/***
-static int blkid_probe_dump_filter(blkid_probe pr, int chain)
-{
- struct blkid_chain *chn;
- int i;
-
- if (!pr || chain < 0 || chain >= BLKID_NCHAINS)
- return -1;
-
- chn = &pr->chains[chain];
-
- if (!chn->fltr)
- return -1;
-
- for (i = 0; i < chn->driver->nidinfos; i++) {
- const struct blkid_idinfo *id = chn->driver->idinfos[i];
-
- DBG(DEBUG_LOWPROBE, printf("%d: %s: %s\n",
- i,
- id->name,
- blkid_bmp_get_item(chn->fltr, i)
- ? "disabled" : "enabled <--"));
- }
- return 0;
-}
-***/
-
-/*
- * Returns properly initialized chain filter
- */
-unsigned long *blkid_probe_get_filter(blkid_probe pr, int chain, int create)
-{
- struct blkid_chain *chn;
-
- if (!pr || chain < 0 || chain >= BLKID_NCHAINS)
- return NULL;
-
- chn = &pr->chains[chain];
-
- /* always when you touch the chain filter all indexes are reset and
- * probing starts from scratch
- */
- blkid_probe_chain_reset_position(chn);
- pr->cur_chain = NULL;
-
- if (!chn->driver->has_fltr || (!chn->fltr && !create))
- return NULL;
-
- if (!chn->fltr)
- chn->fltr = calloc(1, blkid_bmp_nbytes(chn->driver->nidinfos));
- else
- memset(chn->fltr, 0, blkid_bmp_nbytes(chn->driver->nidinfos));
-
- /* blkid_probe_dump_filter(pr, chain); */
- return chn->fltr;
-}
-
-/*
- * Generic private functions for filter setting
- */
-int __blkid_probe_invert_filter(blkid_probe pr, int chain)
-{
- size_t i;
- struct blkid_chain *chn;
-
- if (!pr)
- return -1;
-
- chn = &pr->chains[chain];
-
- if (!chn->driver->has_fltr || !chn->fltr)
- return -1;
-
- for (i = 0; i < blkid_bmp_nwords(chn->driver->nidinfos); i++)
- chn->fltr[i] = ~chn->fltr[i];
-
- DBG(DEBUG_LOWPROBE, printf("probing filter inverted\n"));
- /* blkid_probe_dump_filter(pr, chain); */
- return 0;
-}
-
-int __blkid_probe_reset_filter(blkid_probe pr, int chain)
-{
- return blkid_probe_get_filter(pr, chain, FALSE) ? 0 : -1;
-}
-
-int __blkid_probe_filter_types(blkid_probe pr, int chain, int flag, char *names[])
-{
- unsigned long *fltr;
- struct blkid_chain *chn;
- size_t i;
-
- fltr = blkid_probe_get_filter(pr, chain, TRUE);
- if (!fltr)
- return -1;
-
- chn = &pr->chains[chain];
-
- for (i = 0; i < chn->driver->nidinfos; i++) {
- int has = 0;
- const struct blkid_idinfo *id = chn->driver->idinfos[i];
- char **n;
-
- for (n = names; *n; n++) {
- if (!strcmp(id->name, *n)) {
- has = 1;
- break;
- }
- }
- if (flag & BLKID_FLTR_ONLYIN) {
- if (!has)
- blkid_bmp_set_item(fltr, i);
- } else if (flag & BLKID_FLTR_NOTIN) {
- if (has)
- blkid_bmp_set_item(fltr, i);
- }
- }
-
- DBG(DEBUG_LOWPROBE,
- printf("%s: a new probing type-filter initialized\n",
- chn->driver->name));
- /* blkid_probe_dump_filter(pr, chain); */
- return 0;
-}
-
-unsigned char *blkid_probe_get_buffer(blkid_probe pr,
- blkid_loff_t off, blkid_loff_t len)
-{
- struct list_head *p;
- struct blkid_bufinfo *bf = NULL;
-
- if (pr->size <= 0)
- return NULL;
-
- if (pr->parent &&
- pr->parent->devno == pr->devno &&
- pr->parent->off <= pr->off &&
- pr->parent->off + pr->parent->size >= pr->off + pr->size) {
- /*
- * This is a cloned prober and points to the same area as
- * parent. Let's use parent's buffers.
- *
- * Note that pr->off (and pr->parent->off) is always from the
- * beginig of the device.
- */
- return blkid_probe_get_buffer(pr->parent,
- pr->off + off - pr->parent->off, len);
- }
-
- list_for_each(p, &pr->buffers) {
- struct blkid_bufinfo *x =
- list_entry(p, struct blkid_bufinfo, bufs);
-
- if (x->off <= off && off + len <= x->off + x->len) {
- DBG(DEBUG_LOWPROBE,
- printf("\treuse buffer: off=%jd len=%jd pr=%p\n",
- x->off, x->len, pr));
- bf = x;
- break;
- }
- }
- if (!bf) {
- ssize_t ret;
-
- if (blkid_llseek(pr->fd, pr->off + off, SEEK_SET) < 0)
- return NULL;
-
- /* allocate info and space for data by why call */
- bf = calloc(1, sizeof(struct blkid_bufinfo) + len);
- if (!bf)
- return NULL;
-
- bf->data = ((unsigned char *) bf) + sizeof(struct blkid_bufinfo);
- bf->len = len;
- bf->off = off;
- INIT_LIST_HEAD(&bf->bufs);
-
- DBG(DEBUG_LOWPROBE,
- printf("\tbuffer read: off=%jd len=%jd pr=%p\n",
- off, len, pr));
-
- ret = read(pr->fd, bf->data, len);
- if (ret != (ssize_t) len) {
- free(bf);
- return NULL;
- }
- list_add_tail(&bf->bufs, &pr->buffers);
- }
-
- return off ? bf->data + (off - bf->off) : bf->data;
-}
-
-
-static void blkid_probe_reset_buffer(blkid_probe pr)
-{
- uint64_t read_ct = 0, len_ct = 0;
-
- if (!pr || list_empty(&pr->buffers))
- return;
-
- DBG(DEBUG_LOWPROBE, printf("reseting probing buffers pr=%p\n", pr));
-
- while (!list_empty(&pr->buffers)) {
- struct blkid_bufinfo *bf = list_entry(pr->buffers.next,
- struct blkid_bufinfo, bufs);
- read_ct++;
- len_ct += bf->len;
- list_del(&bf->bufs);
- free(bf);
- }
-
- DBG(DEBUG_LOWPROBE,
- printf("buffers summary: %"PRIu64" bytes "
- "by %"PRIu64" read() call(s)\n",
- len_ct, read_ct));
-
- INIT_LIST_HEAD(&pr->buffers);
-}
-
-/*
- * Small devices need a special care.
- */
-int blkid_probe_is_tiny(blkid_probe pr)
-{
- return pr && (pr->flags & BLKID_FL_TINY_DEV);
-}
-
-/*
- * CDROMs may fail when probed for RAID (last sector problem)
- */
-int blkid_probe_is_cdrom(blkid_probe pr)
-{
- return pr && (pr->flags & BLKID_FL_CDROM_DEV);
-}
-
-/**
- * blkid_probe_set_device:
- * @pr: probe
- * @fd: device file descriptor
- * @off: begin of probing area
- * @size: size of probing area (zero means whole device/file)
- *
- * Assigns the device to probe control struct, resets internal buffers and
- * resets the current probing.
- *
- * Returns: -1 in case of failure, or 0 on success.
- */
-int blkid_probe_set_device(blkid_probe pr, int fd,
- blkid_loff_t off, blkid_loff_t size)
-{
- struct stat sb;
-
- if (!pr)
- return -1;
-
- blkid_reset_probe(pr);
- blkid_probe_reset_buffer(pr);
-
- if ((pr->flags & BLKID_FL_PRIVATE_FD) && pr->fd >= 0)
- close(pr->fd);
-
- pr->flags &= ~BLKID_FL_PRIVATE_FD;
- pr->flags &= ~BLKID_FL_TINY_DEV;
- pr->flags &= ~BLKID_FL_CDROM_DEV;
- pr->prob_flags = 0;
- pr->fd = fd;
- pr->off = off;
- pr->size = 0;
- pr->devno = 0;
- pr->disk_devno = 0;
- pr->mode = 0;
- pr->blkssz = 0;
- pr->wipe_off = 0;
- pr->wipe_size = 0;
- pr->wipe_chain = NULL;
-
-#if defined(POSIX_FADV_RANDOM) && defined(HAVE_POSIX_FADVISE)
- /* Disable read-ahead */
- posix_fadvise(fd, 0, 0, POSIX_FADV_RANDOM);
-#endif
- if (fstat(fd, &sb))
- goto err;
-
- if (!S_ISBLK(sb.st_mode) && !S_ISCHR(sb.st_mode) && !S_ISREG(sb.st_mode))
- goto err;
-
- pr->mode = sb.st_mode;
- if (S_ISBLK(sb.st_mode) || S_ISCHR(sb.st_mode))
- pr->devno = sb.st_rdev;
-
- if (size)
- pr->size = size;
- else {
- if (S_ISBLK(sb.st_mode)) {
- if (blkdev_get_size(fd, (unsigned long long *) &pr->size)) {
- DBG(DEBUG_LOWPROBE, printf(
- "failed to get device size\n"));
- goto err;
- }
- } else if (S_ISCHR(sb.st_mode))
- pr->size = 1; /* UBI devices are char... */
- else if (S_ISREG(sb.st_mode))
- pr->size = sb.st_size; /* regular file */
-
- if (pr->off > pr->size)
- goto err;
-
- /* The probing area cannot be larger than whole device, pr->off
- * is offset within the device */
- pr->size -= pr->off;
- }
-
- if (pr->size <= 1440 * 1024 && !S_ISCHR(sb.st_mode))
- pr->flags |= BLKID_FL_TINY_DEV;
-
-#ifdef CDROM_GET_CAPABILITY
- if (S_ISBLK(sb.st_mode) &&
- !blkid_probe_is_tiny(pr) &&
- blkid_probe_is_wholedisk(pr) &&
- ioctl(fd, CDROM_GET_CAPABILITY, NULL) >= 0)
- pr->flags |= BLKID_FL_CDROM_DEV;
-#endif
-
- DBG(DEBUG_LOWPROBE, printf("ready for low-probing, offset=%jd, size=%jd\n",
- pr->off, pr->size));
- DBG(DEBUG_LOWPROBE, printf("whole-disk: %s, regfile: %s\n",
- blkid_probe_is_wholedisk(pr) ?"YES" : "NO",
- S_ISREG(pr->mode) ? "YES" : "NO"));
-
- return 0;
-err:
- DBG(DEBUG_LOWPROBE,
- printf("failed to prepare a device for low-probing\n"));
- return -1;
-
-}
-
-int blkid_probe_get_dimension(blkid_probe pr,
- blkid_loff_t *off, blkid_loff_t *size)
-{
- if (!pr)
- return -1;
-
- *off = pr->off;
- *size = pr->size;
- return 0;
-}
-
-int blkid_probe_set_dimension(blkid_probe pr,
- blkid_loff_t off, blkid_loff_t size)
-{
- if (!pr)
- return -1;
-
- DBG(DEBUG_LOWPROBE, printf(
- "changing probing area pr=%p: size=%llu, off=%llu "
- "-to-> size=%llu, off=%llu\n",
- pr,
- (unsigned long long) pr->size,
- (unsigned long long) pr->off,
- (unsigned long long) size,
- (unsigned long long) off));
-
- pr->off = off;
- pr->size = size;
- pr->flags &= ~BLKID_FL_TINY_DEV;
-
- if (pr->size <= 1440 * 1024 && !S_ISCHR(pr->mode))
- pr->flags |= BLKID_FL_TINY_DEV;
-
- blkid_probe_reset_buffer(pr);
-
- return 0;
-}
-
-int blkid_probe_get_idmag(blkid_probe pr, const struct blkid_idinfo *id,
- blkid_loff_t *offset, const struct blkid_idmag **res)
-{
- const struct blkid_idmag *mag = NULL;
- blkid_loff_t off = 0;
-
- if (id)
- mag = &id->magics[0];
- if (res)
- *res = NULL;
-
- /* try to detect by magic string */
- while(mag && mag->magic) {
- unsigned char *buf;
-
- off = (mag->kboff + (mag->sboff >> 10)) << 10;
- buf = blkid_probe_get_buffer(pr, off, 1024);
-
- if (buf && !memcmp(mag->magic,
- buf + (mag->sboff & 0x3ff), mag->len)) {
- DBG(DEBUG_LOWPROBE, printf(
- "\tmagic sboff=%u, kboff=%ld\n",
- mag->sboff, mag->kboff));
- if (offset)
- *offset = off + (mag->sboff & 0x3ff);
- if (res)
- *res = mag;
- return 0;
- }
- mag++;
- }
-
- if (id && id->magics[0].magic)
- /* magic string(s) defined, but not found */
- return 1;
-
- return 0;
-}
-
-static inline void blkid_probe_start(blkid_probe pr)
-{
- if (pr) {
- DBG(DEBUG_LOWPROBE, printf("%p: start probe\n", pr));
- pr->cur_chain = NULL;
- pr->prob_flags = 0;
- blkid_probe_set_wiper(pr, 0, 0);
- }
-}
-
-static inline void blkid_probe_end(blkid_probe pr)
-{
- if (pr) {
- DBG(DEBUG_LOWPROBE, printf("%p: end probe\n", pr));
- pr->cur_chain = NULL;
- pr->prob_flags = 0;
- blkid_probe_set_wiper(pr, 0, 0);
- }
-}
-
-/**
- * blkid_do_probe:
- * @pr: prober
- *
- * Calls probing functions in all enabled chains. The superblocks chain is
- * enabled by default. The blkid_do_probe() stores result from only one
- * probing function. It's necessary to call this routine in a loop to get
- * results from all probing functions in all chains. The probing is reset
- * by blkid_reset_probe() or by filter functions.
- *
- * This is string-based NAME=value interface only.
- *
- * <example>
- * <title>basic case - use the first result only</title>
- * <programlisting>
- *
- * if (blkid_do_probe(pr) == 0) {
- * int nvals = blkid_probe_numof_values(pr);
- * for (n = 0; n < nvals; n++) {
- * if (blkid_probe_get_value(pr, n, &name, &data, &len) == 0)
- * printf("%s = %s\n", name, data);
- * }
- * }
- * </programlisting>
- * </example>
- *
- * <example>
- * <title>advanced case - probe for all signatures</title>
- * <programlisting>
- *
- * while (blkid_do_probe(pr) == 0) {
- * int nvals = blkid_probe_numof_values(pr);
- * ...
- * }
- * </programlisting>
- * </example>
- *
- * See also blkid_reset_probe().
- *
- * Returns: 0 on success, 1 when probing is done and -1 in case of error.
- */
-int blkid_do_probe(blkid_probe pr)
-{
- int rc = 1;
-
- if (!pr)
- return -1;
-
- do {
- struct blkid_chain *chn = pr->cur_chain;
-
- if (!chn) {
- blkid_probe_start(pr);
- chn = pr->cur_chain = &pr->chains[0];
- }
- /* we go to the next chain only when the previous probing
- * result was nothing (rc == 1) and when the current chain is
- * disabled or we are at end of the current chain (chain->idx +
- * 1 == sizeof chain) or the current chain bailed out right at
- * the start (chain->idx == -1)
- */
- else if (rc == 1 && (chn->enabled == FALSE ||
- chn->idx + 1 == (int) chn->driver->nidinfos ||
- chn->idx == -1)) {
-
- size_t idx = chn->driver->id + 1;
-
- if (idx < BLKID_NCHAINS)
- chn = pr->cur_chain = &pr->chains[idx];
- else {
- blkid_probe_end(pr);
- return 1; /* all chains already probed */
- }
- }
-
- chn->binary = FALSE; /* for sure... */
-
- DBG(DEBUG_LOWPROBE, printf("chain probe %s %s (idx=%d)\n",
- chn->driver->name,
- chn->enabled? "ENABLED" : "DISABLED",
- chn->idx));
-
- if (!chn->enabled)
- continue;
-
- /* rc: -1 = error, 0 = success, 1 = no result */
- rc = chn->driver->probe(pr, chn);
-
- } while (rc == 1);
-
- return rc;
-}
-
-/**
- * blkid_do_wipe:
- * @pr: prober
- * @dryrun: if TRUE then don't touch the device.
- *
- * This function erases the current signature detected by @pr. The @pr has to
- * be open in O_RDWR mode, BLKID_SUBLKS_MAGIC or/and BLKID_PARTS_MAGIC flags
- * has to be enabled.
- *
- * After successful signature removing the @pr prober will be moved one step
- * back and the next blkid_do_probe() call will again call previously called
- * probing function.
- *
- * <example>
- * <title>wipe all filesystems or raids from the device</title>
- * <programlisting>
- * fd = open(devname, O_RDWR|O_CLOEXEC);
- * blkid_probe_set_device(pr, fd, 0, 0);
- *
- * blkid_probe_enable_superblocks(pr, 1);
- * blkid_probe_set_superblocks_flags(pr, BLKID_SUBLKS_MAGIC);
- *
- * while (blkid_do_probe(pr) == 0)
- * blkid_do_wipe(pr, FALSE);
- * </programlisting>
- * </example>
- *
- * See also blkid_probe_step_back() if you cannot use this build-in wipe
- * function, but you want to use libblkid probing as a source for wiping.
- *
- * Returns: 0 on success, and -1 in case of error.
- */
-int blkid_do_wipe(blkid_probe pr, int dryrun)
-{
- const char *off = NULL;
- size_t len = 0;
- loff_t offset, l;
- char buf[BUFSIZ];
- int fd, rc = 0;
- struct blkid_chain *chn;
-
- if (!pr)
- return -1;
-
- chn = pr->cur_chain;
- if (!chn)
- return -1;
-
- switch (chn->driver->id) {
- case BLKID_CHAIN_SUBLKS:
- rc = blkid_probe_lookup_value(pr, "SBMAGIC_OFFSET", &off, NULL);
- if (!rc)
- rc = blkid_probe_lookup_value(pr, "SBMAGIC", NULL, &len);
- break;
- case BLKID_CHAIN_PARTS:
- rc = blkid_probe_lookup_value(pr, "PTMAGIC_OFFSET", &off, NULL);
- if (!rc)
- rc = blkid_probe_lookup_value(pr, "PTMAGIC", NULL, &len);
- break;
- default:
- return 0;
- }
-
- if (rc || len == 0 || off == NULL)
- return 0;
-
- offset = strtoll(off, NULL, 10);
- fd = blkid_probe_get_fd(pr);
- if (fd < 0)
- return -1;
-
- if (len > sizeof(buf))
- len = sizeof(buf);
-
- DBG(DEBUG_LOWPROBE, printf(
- "do_wipe [offset=0x%jx, len=%zd, chain=%s, idx=%d, dryrun=%s]\n",
- offset, len, chn->driver->name, chn->idx, dryrun ? "yes" : "not"));
-
- l = lseek(fd, offset, SEEK_SET);
- if (l == (off_t) -1)
- return -1;
-
- memset(buf, 0, len);
-
- if (!dryrun && len) {
- if (write_all(fd, buf, len))
- return -1;
- fsync(fd);
- return blkid_probe_step_back(pr);
- }
-
- return 0;
-}
-
-/**
- * blkid_probe_step_back():
- * @pr: prober
- *
- * This function move pointer to the probing chain one step back -- it means
- * that the previously used probing function will be called again in the next
- * blkid_do_probe() call.
- *
- * This is necessary for example if you erase or modify on-disk superblock
- * according to the current libblkid probing result.
- *
- * <example>
- * <title>wipe all superblock, but use libblkid only for probing</title>
- * <programlisting>
- * pr = blkid_new_probe_from_filename(devname);
- *
- * blkid_probe_enable_superblocks(pr, 1);
- * blkid_probe_set_superblocks_flags(pr, BLKID_SUBLKS_MAGIC);
- *
- * while (blkid_do_probe(pr) == 0) {
- * const char *ostr = NULL;
- * size_t len = 0;
- *
- * // superblocks
- * if (blkid_probe_lookup_value(pr, "SBMAGIC_OFFSET", &ostr, NULL) == 0)
- * blkid_probe_lookup_value(pr, "SBMAGIC", NULL, &len);
- *
- * // partition tables
- * if (len == 0 && blkid_probe_lookup_value(pr, "PTMAGIC_OFFSET", &ostr, NULL) == 0)
- * blkid_probe_lookup_value(pr, "PTMAGIC", NULL, &len);
- *
- * if (!len || !str)
- * continue;
- *
- * // convert ostr to the real offset by off = strtoll(ostr, NULL, 10);
- * // use your stuff to errase @len bytes at the @off
- * ....
- *
- * // retry the last probing to check for backup superblocks ..etc.
- * blkid_probe_step_back(pr);
- * }
- * </programlisting>
- * </example>
- *
- * Returns: 0 on success, and -1 in case of error.
- */
-int blkid_probe_step_back(blkid_probe pr)
-{
- struct blkid_chain *chn;
-
- if (!pr)
- return -1;
-
- chn = pr->cur_chain;
- if (!chn)
- return -1;
-
- blkid_probe_reset_buffer(pr);
-
- if (chn->idx >= 0) {
- chn->idx--;
- DBG(DEBUG_LOWPROBE,
- printf("step back: moving %s chain index to %d\n",
- chn->driver->name,
- chn->idx));
- }
-
- if (chn->idx == -1) {
- /* blkid_do_probe() goes to the next chain if the index
- * of the current chain is -1, so we have to set the
- * chain pointer to the previous chain.
- */
- size_t idx = chn->driver->id > 0 ? chn->driver->id - 1 : 0;
-
- DBG(DEBUG_LOWPROBE, printf("step back: moving to previous chain\n"));
-
- if (idx > 0)
- pr->cur_chain = &pr->chains[idx];
- else if (idx == 0)
- pr->cur_chain = NULL;
- }
-
- return 0;
-}
-
-/**
- * blkid_do_safeprobe:
- * @pr: prober
- *
- * This function gathers probing results from all enabled chains and checks
- * for ambivalent results (e.g. more filesystems on the device).
- *
- * This is string-based NAME=value interface only.
- *
- * Note about suberblocks chain -- the function does not check for filesystems
- * when a RAID signature is detected. The function also does not check for
- * collision between RAIDs. The first detected RAID is returned. The function
- * checks for collision between partition table and RAID signature -- it's
- * recommended to enable partitions chain together with superblocks chain.
- *
- * Returns: 0 on success, 1 if nothing is detected, -2 if ambivalen result is
- * detected and -1 on case of error.
- */
-int blkid_do_safeprobe(blkid_probe pr)
-{
- int i, count = 0, rc = 0;
-
- if (!pr)
- return -1;
-
- blkid_probe_start(pr);
-
- pr->prob_flags |= BLKID_PROBE_FL_IGNORE_BACKUP;
-
- for (i = 0; i < BLKID_NCHAINS; i++) {
- struct blkid_chain *chn;
-
- chn = pr->cur_chain = &pr->chains[i];
- chn->binary = FALSE; /* for sure... */
-
- DBG(DEBUG_LOWPROBE, printf("chain safeprobe %s %s\n",
- chn->driver->name,
- chn->enabled? "ENABLED" : "DISABLED"));
-
- if (!chn->enabled)
- continue;
-
- blkid_probe_chain_reset_position(chn);
-
- rc = chn->driver->safeprobe(pr, chn);
-
- blkid_probe_chain_reset_position(chn);
-
- /* rc: -2 ambivalent, -1 = error, 0 = success, 1 = no result */
- if (rc < 0)
- goto done; /* error */
- if (rc == 0)
- count++; /* success */
- }
-
-done:
- blkid_probe_end(pr);
- if (rc < 0)
- return rc;
- return count ? 0 : 1;
-}
-
-/**
- * blkid_do_fullprobe:
- * @pr: prober
- *
- * This function gathers probing results from all enabled chains. Same as
- * blkid_do_safeprobe() but does not check for collision between probing
- * result.
- *
- * This is string-based NAME=value interface only.
- *
- * Returns: 0 on success, 1 if nothing is detected or -1 on case of error.
- */
-int blkid_do_fullprobe(blkid_probe pr)
-{
- int i, count = 0, rc = 0;
-
- if (!pr)
- return -1;
-
- blkid_probe_start(pr);
-
- for (i = 0; i < BLKID_NCHAINS; i++) {
- struct blkid_chain *chn;
-
- chn = pr->cur_chain = &pr->chains[i];
- chn->binary = FALSE; /* for sure... */
-
- DBG(DEBUG_LOWPROBE, printf("chain fullprobe %s: %s\n",
- chn->driver->name,
- chn->enabled? "ENABLED" : "DISABLED"));
-
- if (!chn->enabled)
- continue;
-
- blkid_probe_chain_reset_position(chn);
-
- rc = chn->driver->probe(pr, chn);
-
- blkid_probe_chain_reset_position(chn);
-
- /* rc: -1 = error, 0 = success, 1 = no result */
- if (rc < 0)
- goto done; /* error */
- if (rc == 0)
- count++; /* success */
- }
-
-done:
- blkid_probe_end(pr);
- if (rc < 0)
- return rc;
- return count ? 0 : 1;
-}
-
-/* same sa blkid_probe_get_buffer() but works with 512-sectors */
-unsigned char *blkid_probe_get_sector(blkid_probe pr, unsigned int sector)
-{
- return pr ? blkid_probe_get_buffer(pr,
- ((blkid_loff_t) sector) << 9, 0x200) : NULL;
-}
-
-struct blkid_prval *blkid_probe_assign_value(
- blkid_probe pr, const char *name)
-{
- struct blkid_prval *v;
-
- if (!name)
- return NULL;
- if (pr->nvals >= BLKID_NVALS)
- return NULL;
-
- v = &pr->vals[pr->nvals];
- v->name = name;
- v->chain = pr->cur_chain;
- pr->nvals++;
-
- DBG(DEBUG_LOWPROBE,
- printf("assigning %s [%s]\n", name, v->chain->driver->name));
- return v;
-}
-
-int blkid_probe_reset_last_value(blkid_probe pr)
-{
- struct blkid_prval *v;
-
- if (pr == NULL || pr->nvals == 0)
- return -1;
-
- v = &pr->vals[pr->nvals - 1];
-
- DBG(DEBUG_LOWPROBE,
- printf("un-assigning %s [%s]\n", v->name, v->chain->driver->name));
-
- memset(v, 0, sizeof(struct blkid_prval));
- pr->nvals--;
-
- return 0;
-
-}
-
-int blkid_probe_set_value(blkid_probe pr, const char *name,
- unsigned char *data, size_t len)
-{
- struct blkid_prval *v;
-
- if (len > BLKID_PROBVAL_BUFSIZ)
- len = BLKID_PROBVAL_BUFSIZ;
-
- v = blkid_probe_assign_value(pr, name);
- if (!v)
- return -1;
-
- memcpy(v->data, data, len);
- v->len = len;
- return 0;
-}
-
-int blkid_probe_vsprintf_value(blkid_probe pr, const char *name,
- const char *fmt, va_list ap)
-{
- struct blkid_prval *v;
- ssize_t len;
-
- v = blkid_probe_assign_value(pr, name);
- if (!v)
- return -1;
-
- len = vsnprintf((char *) v->data, sizeof(v->data), fmt, ap);
-
- if (len <= 0 || (size_t) len >= sizeof(v->data)) {
- blkid_probe_reset_last_value(pr);
- return -1;
- }
- v->len = len + 1;
- return 0;
-}
-
-int blkid_probe_sprintf_value(blkid_probe pr, const char *name,
- const char *fmt, ...)
-{
- int rc;
- va_list ap;
-
- va_start(ap, fmt);
- rc = blkid_probe_vsprintf_value(pr, name, fmt, ap);
- va_end(ap);
-
- return rc;
-}
-
-int blkid_probe_set_magic(blkid_probe pr, blkid_loff_t offset,
- size_t len, unsigned char *magic)
-{
- int rc = 0;
- struct blkid_chain *chn = blkid_probe_get_chain(pr);
-
- if (!chn || !magic || !len || chn->binary)
- return 0;
-
- switch (chn->driver->id) {
- case BLKID_CHAIN_SUBLKS:
- if (!(chn->flags & BLKID_SUBLKS_MAGIC))
- return 0;
- rc = blkid_probe_set_value(pr, "SBMAGIC", magic, len);
- if (!rc)
- rc = blkid_probe_sprintf_value(pr,
- "SBMAGIC_OFFSET", "%llu", (unsigned long long)offset);
- break;
- case BLKID_CHAIN_PARTS:
- if (!(chn->flags & BLKID_PARTS_MAGIC))
- return 0;
- rc = blkid_probe_set_value(pr, "PTMAGIC", magic, len);
- if (!rc)
- rc = blkid_probe_sprintf_value(pr,
- "PTMAGIC_OFFSET", "%llu", (unsigned long long)offset);
- break;
- default:
- break;
- }
-
- return rc;
-}
-
-/**
- * blkid_probe_get_devno:
- * @pr: probe
- *
- * Returns: block device number, or 0 for regular files.
- */
-dev_t blkid_probe_get_devno(blkid_probe pr)
-{
- return pr->devno;
-}
-
-/**
- * blkid_probe_get_wholedisk_devno:
- * @pr: probe
- *
- * Returns: device number of the wholedisk, or 0 for regular files.
- */
-dev_t blkid_probe_get_wholedisk_devno(blkid_probe pr)
-{
- if (!pr->disk_devno) {
- dev_t devno, disk_devno = 0;
-
- devno = blkid_probe_get_devno(pr);
- if (!devno)
- return 0;
-
- if (blkid_devno_to_wholedisk(devno, NULL, 0, &disk_devno) == 0)
- pr->disk_devno = disk_devno;
- }
- return pr->disk_devno;
-}
-
-/**
- * blkid_probe_is_wholedisk:
- * @pr: probe
- *
- * Returns: 1 if the device is whole-disk or 0.
- */
-int blkid_probe_is_wholedisk(blkid_probe pr)
-{
- dev_t devno, disk_devno;
-
- devno = blkid_probe_get_devno(pr);
- if (!devno)
- return 0;
-
- disk_devno = blkid_probe_get_wholedisk_devno(pr);
- if (!disk_devno)
- return 0;
-
- return devno == disk_devno;
-}
-
-blkid_probe blkid_probe_get_wholedisk_probe(blkid_probe pr)
-{
- dev_t disk;
-
- if (blkid_probe_is_wholedisk(pr))
- return NULL; /* this is not partition */
-
- if (pr->parent)
- /* this is cloned blkid_probe, use parent's stuff */
- return blkid_probe_get_wholedisk_probe(pr->parent);
-
- disk = blkid_probe_get_wholedisk_devno(pr);
-
- if (pr->disk_probe && pr->disk_probe->devno != disk) {
- /* we have disk prober, but for another disk... close it */
- blkid_free_probe(pr->disk_probe);
- pr->disk_probe = NULL;
- }
-
- if (!pr->disk_probe) {
- /* Open a new disk prober */
- char *disk_path = blkid_devno_to_devname(disk);
-
- if (!disk_path)
- return NULL;
-
- DBG(DEBUG_LOWPROBE, printf("allocate a wholedisk probe\n"));
-
- pr->disk_probe = blkid_new_probe_from_filename(disk_path);
-
- free(disk_path);
-
- if (!pr->disk_probe)
- return NULL; /* ENOMEM? */
- }
-
- return pr->disk_probe;
-}
-
-/**
- * blkid_probe_get_size:
- * @pr: probe
- *
- * This function returns size of probing area as defined by blkid_probe_set_device().
- * If the size of the probing area is unrestricted then this function returns
- * the real size of device. See also blkid_get_dev_size().
- *
- * Returns: size in bytes or -1 in case of error.
- */
-blkid_loff_t blkid_probe_get_size(blkid_probe pr)
-{
- return pr ? pr->size : -1;
-}
-
-/**
- * blkid_probe_get_offset:
- * @pr: probe
- *
- * This function returns offset of probing area as defined by blkid_probe_set_device().
- *
- * Returns: offset in bytes or -1 in case of error.
- */
-blkid_loff_t blkid_probe_get_offset(blkid_probe pr)
-{
- return pr ? pr->off : -1;
-}
-
-/**
- * blkid_probe_get_fd:
- * @pr: probe
- *
- * Returns: file descriptor for assigned device/file or -1 in case of error.
- */
-int blkid_probe_get_fd(blkid_probe pr)
-{
- return pr ? pr->fd : -1;
-}
-
-/**
- * blkid_probe_get_sectorsize:
- * @pr: probe or NULL (for NULL returns 512)
- *
- * Returns: block device logical sector size (BLKSSZGET ioctl, default 512).
- */
-unsigned int blkid_probe_get_sectorsize(blkid_probe pr)
-{
- if (!pr)
- return DEFAULT_SECTOR_SIZE; /*... and good luck! */
-
- if (pr->blkssz)
- return pr->blkssz;
-
- if (S_ISBLK(pr->mode) &&
- blkdev_get_sector_size(pr->fd, (int *) &pr->blkssz) == 0)
- return pr->blkssz;
-
- pr->blkssz = DEFAULT_SECTOR_SIZE;
- return pr->blkssz;
-}
-
-/**
- * blkid_probe_get_sectors:
- * @pr: probe
- *
- * Returns: 512-byte sector count or -1 in case of error.
- */
-blkid_loff_t blkid_probe_get_sectors(blkid_probe pr)
-{
- return pr ? pr->size >> 9 : -1;
-}
-
-/**
- * blkid_probe_numof_values:
- * @pr: probe
- *
- * Returns: number of values in probing result or -1 in case of error.
- */
-int blkid_probe_numof_values(blkid_probe pr)
-{
- if (!pr)
- return -1;
- return pr->nvals;
-}
-
-/**
- * blkid_probe_get_value:
- * @pr: probe
- * @num: wanted value in range 0..N, where N is blkid_probe_numof_values() - 1
- * @name: pointer to return value name or NULL
- * @data: pointer to return value data or NULL
- * @len: pointer to return value length or NULL
- *
- * Note, the @len returns length of the @data, including the terminating
- * '\0' character.
- *
- * Returns: 0 on success, or -1 in case of error.
- */
-int blkid_probe_get_value(blkid_probe pr, int num, const char **name,
- const char **data, size_t *len)
-{
- struct blkid_prval *v = __blkid_probe_get_value(pr, num);
-
- if (!v)
- return -1;
- if (name)
- *name = v->name;
- if (data)
- *data = (char *) v->data;
- if (len)
- *len = v->len;
-
- DBG(DEBUG_LOWPROBE, printf("returning %s value\n", v->name));
- return 0;
-}
-
-/**
- * blkid_probe_lookup_value:
- * @pr: probe
- * @name: name of value
- * @data: pointer to return value data or NULL
- * @len: pointer to return value length or NULL
- *
- * Note, the @len returns length of the @data, including the terminating
- * '\0' character.
- *
- * Returns: 0 on success, or -1 in case of error.
- */
-int blkid_probe_lookup_value(blkid_probe pr, const char *name,
- const char **data, size_t *len)
-{
- struct blkid_prval *v = __blkid_probe_lookup_value(pr, name);
-
- if (!v)
- return -1;
- if (data)
- *data = (char *) v->data;
- if (len)
- *len = v->len;
- return 0;
-}
-
-/**
- * blkid_probe_has_value:
- * @pr: probe
- * @name: name of value
- *
- * Returns: 1 if value exist in probing result, otherwise 0.
- */
-int blkid_probe_has_value(blkid_probe pr, const char *name)
-{
- if (blkid_probe_lookup_value(pr, name, NULL, NULL) == 0)
- return 1;
- return 0;
-}
-
-struct blkid_prval *__blkid_probe_get_value(blkid_probe pr, int num)
-{
- if (!pr || num < 0 || num >= pr->nvals)
- return NULL;
-
- return &pr->vals[num];
-}
-
-struct blkid_prval *__blkid_probe_lookup_value(blkid_probe pr, const char *name)
-{
- int i;
-
- if (!pr || !pr->nvals || !name)
- return NULL;
-
- for (i = 0; i < pr->nvals; i++) {
- struct blkid_prval *v = &pr->vals[i];
-
- if (v->name && strcmp(name, v->name) == 0) {
- DBG(DEBUG_LOWPROBE, printf("returning %s value\n", v->name));
- return v;
- }
- }
- return NULL;
-}
-
-
-/* converts DCE UUID (uuid[16]) to human readable string
- * - the @len should be always 37 */
-#ifdef HAVE_LIBUUID
-void blkid_unparse_uuid(const unsigned char *uuid, char *str,
- size_t len __attribute__((__unused__)))
-{
- uuid_unparse(uuid, str);
-}
-#else
-void blkid_unparse_uuid(const unsigned char *uuid, char *str, size_t len)
-{
- snprintf(str, len,
- "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x",
- uuid[0], uuid[1], uuid[2], uuid[3],
- uuid[4], uuid[5],
- uuid[6], uuid[7],
- uuid[8], uuid[9],
- uuid[10], uuid[11], uuid[12], uuid[13], uuid[14],uuid[15]);
-}
-#endif
-
-
-/* Removes whitespace from the right-hand side of a string (trailing
- * whitespace).
- *
- * Returns size of the new string (without \0).
- */
-size_t blkid_rtrim_whitespace(unsigned char *str)
-{
- size_t i = strlen((char *) str);
-
- while (i--) {
- if (!isspace(str[i]))
- break;
- }
- str[++i] = '\0';
- return i;
-}
-
-/* Removes whitespace from the left-hand side of a string.
- *
- * Returns size of the new string (without \0).
- */
-size_t blkid_ltrim_whitespace(unsigned char *str)
-{
- size_t len;
- unsigned char *p;
-
- for (p = str; p && isspace(*p); p++);
-
- len = strlen((char *) p);
-
- if (len && p > str)
- memmove(str, p, len + 1);
-
- return len;
-}
-/*
- * Some mkfs-like utils wipe some parts (usually begin) of the device.
- * For example LVM (pvcreate) or mkswap(8). This information could be used
- * for later resolution to conflicts between superblocks.
- *
- * For example we found valid LVM superblock, LVM wipes 8KiB at the begin of
- * the device. If we found another signature (for example MBR) within the
- * wiped area then the signature has been added later and LVM superblock
- * should be ignore.
- *
- * Note that this heuristic is not 100% reliable, for example "pvcreate --zero
- * n" allows to keep the begin of the device unmodified. It's probably better
- * to use this heuristic for conflicts between superblocks and partition tables
- * than for conflicts between filesystem superblocks -- existence of unwanted
- * partition table is very unusual, because PT is pretty visible (parsed and
- * interpreted by kernel).
- *
- * Note that we usually expect only one signature on the device, it means that
- * we have to remember only one wiped area from previously successfully
- * detected signature.
- *
- * blkid_probe_set_wiper() -- defines wiped area (e.g. LVM)
- * blkid_probe_use_wiper() -- try to use area (e.g. MBR)
- *
- * Note that there is not relation between _wiper and blkid_to_wipe().
- *
- */
-void blkid_probe_set_wiper(blkid_probe pr, blkid_loff_t off, blkid_loff_t size)
-{
- struct blkid_chain *chn;
-
- if (!pr)
- return;
-
- if (!size) {
- DBG(DEBUG_LOWPROBE, printf("zeroize wiper\n"));
- pr->wipe_size = pr->wipe_off = 0;
- pr->wipe_chain = NULL;
- return;
- }
-
- chn = pr->cur_chain;
-
- if (!chn || !chn->driver ||
- chn->idx < 0 || (size_t) chn->idx >= chn->driver->nidinfos)
- return;
-
- pr->wipe_size = size;
- pr->wipe_off = off;
- pr->wipe_chain = chn;
-
- DBG(DEBUG_LOWPROBE,
- printf("wiper set to %s::%s off=%jd size=%jd\n",
- chn->driver->name,
- chn->driver->idinfos[chn->idx]->name,
- pr->wipe_off, pr->wipe_size));
- return;
-}
-
-/*
- * Returns 1 if the <@off,@size> area was wiped
- */
-int blkid_probe_is_wiped(blkid_probe pr, struct blkid_chain **chn,
- blkid_loff_t off, blkid_loff_t size)
-{
- if (!pr || !size)
- return 0;
-
- if (pr->wipe_off <= off && off + size <= pr->wipe_off + pr->wipe_size) {
- if (chn)
- *chn = pr->wipe_chain;
- return 1;
- }
- return 0;
-}
-
-/*
- * Try to use any area -- if the area has been previously wiped then the
- * previous probing result should be ignored (reseted).
- */
-void blkid_probe_use_wiper(blkid_probe pr, blkid_loff_t off, blkid_loff_t size)
-{
- struct blkid_chain *chn = NULL;
-
- if (blkid_probe_is_wiped(pr, &chn, off, size) && chn) {
- DBG(DEBUG_LOWPROBE, printf("previously wiped area modified "
- " -- ignore previous results\n"));
- blkid_probe_set_wiper(pr, 0, 0);
- blkid_probe_chain_reset_vals(pr, chn);
- }
-}
-
-int blkid_probe_ignore_backup(blkid_probe pr)
-{
- return pr && (pr->prob_flags & BLKID_PROBE_FL_IGNORE_BACKUP);
-}