/*++ Copyright (c) 1990 Microsoft Corporation Module Name: namepipe.c Abstract: This module contains the Win32 Named Pipe API Author: Colin Watson (ColinW) 13-March-1991 Revision History: --*/ #include "basedll.h" #define DOS_LOCAL_PIPE_PREFIX L"\\\\.\\pipe\\" #define DOS_LOCAL_PIPE L"\\DosDevices\\pipe\\" #define DOS_REMOTE_PIPE L"\\DosDevices\\UNC\\" #define INVALID_PIPE_MODE_BITS ~(PIPE_READMODE_BYTE \ | PIPE_READMODE_MESSAGE \ | PIPE_WAIT \ | PIPE_NOWAIT) BOOL NpGetUserNamep( HANDLE hNamedPipe, LPWSTR lpUserName, DWORD nMaxUserNameSize ); typedef BOOL (WINAPI *REVERTTOSELF)( VOID ); typedef BOOL (WINAPI *GETUSERNAMEW)( LPWSTR, LPDWORD ); typedef BOOL (WINAPI *IMPERSONATENAMEDPIPECLIENT)( HANDLE ); HANDLE APIENTRY CreateNamedPipeA( LPCSTR lpName, DWORD dwOpenMode, DWORD dwPipeMode, DWORD nMaxInstances, DWORD nOutBufferSize, DWORD nInBufferSize, DWORD nDefaultTimeOut, LPSECURITY_ATTRIBUTES lpSecurityAttributes ) /*++ Ansi thunk to CreateNamedPipeW. --*/ { NTSTATUS Status; PUNICODE_STRING Unicode; ANSI_STRING AnsiString; Unicode = &NtCurrentTeb()->StaticUnicodeString; RtlInitAnsiString(&AnsiString,lpName); Status = RtlAnsiStringToUnicodeString(Unicode,&AnsiString,FALSE); if ( !NT_SUCCESS(Status) ) { if ( Status == STATUS_BUFFER_OVERFLOW ) { SetLastError(ERROR_FILENAME_EXCED_RANGE); } else { BaseSetLastNTError(Status); } return INVALID_HANDLE_VALUE; } return CreateNamedPipeW( (LPCWSTR)Unicode->Buffer, dwOpenMode, dwPipeMode, nMaxInstances, nOutBufferSize, nInBufferSize, nDefaultTimeOut, lpSecurityAttributes); } HANDLE APIENTRY CreateNamedPipeW( LPCWSTR lpName, DWORD dwOpenMode, DWORD dwPipeMode, DWORD nMaxInstances, DWORD nOutBufferSize, DWORD nInBufferSize, DWORD nDefaultTimeOut, LPSECURITY_ATTRIBUTES lpSecurityAttributes ) /*++ Parameters: lpName --Supplies the pipe name Documented in "Pipe Names" section earlier. This must be a local name. dwOpenMode --Supplies the set of flags that define the mode which the pipe is to be opened with. The open mode consists of access flags (one of three values) logically ORed with a writethrough flag (one of two values) and an overlapped flag (one of two values), as described below. dwOpenMode Flags: PIPE_ACCESS_DUPLEX --Pipe is bidirectional. (This is semantically equivalent to calling CreateFile with access flags of GENERIC_READ | GENERIC_WRITE.) PIPE_ACCESS_INBOUND --Data goes from client to server only. (This is semantically equivalent to calling CreateFile with access flags of GENERIC_READ.) PIPE_ACCESS_OUTBOUND --Data goes from server to client only. (This is semantically equivalent to calling CreateFile with access flags of GENERIC_WRITE.) PIPE_WRITETHROUGH --The redirector is not permitted to delay the transmission of data to the named pipe buffer on the remote server. This disables a performance enhancement for applications that need synchronization with every write operation. FILE_FLAG_OVERLAPPED --Indicates that the system should initialize the file so that ReadFile, WriteFile and other operations that may take a significant time to process will return ERROR_IO_PENDING. An event will be set to the signalled state when the operation completes. FILE_FLAG_WRITETHROUGH -- No intermediate buffering. WRITE_DAC -- Standard security desired access WRITE_OWNER -- ditto ACCESS_SYSTEM_SECURITY -- ditto dwPipeMode --Supplies the pipe-specific modes (as flags) of the pipe. This parameter is a combination of a read-mode flag, a type flag, and a wait flag. dwPipeMode Flags: PIPE_WAIT --Blocking mode is to be used for this handle. PIPE_NOWAIT --Nonblocking mode is to be used for this handle. PIPE_READMODE_BYTE --Read pipe as a byte stream. PIPE_READMODE_MESSAGE --Read pipe as a message stream. Note that this is not allowed with PIPE_TYPE_BYTE. PIPE_TYPE_BYTE --Pipe is a byte-stream pipe. Note that this is not allowed with PIPE_READMODE_MESSAGE. PIPE_TYPE_MESSAGE --Pipe is a message-stream pipe. nMaxInstances --Gives the maximum number of instances for this pipe. Acceptable values are 1 to PIPE_UNLIMITED_INSTANCES-1 and PIPE_UNLIMITED_INSTANCES. nMaxInstances Special Values: PIPE_UNLIMITED_INSTANCES --Unlimited instances of this pipe can be created. nOutBufferSize --Specifies an advisory on the number of bytes to reserve for the outgoing buffer. nInBufferSize --Specifies an advisory on the number of bytes to reserve for the incoming buffer. nDefaultTimeOut -- Specifies an optional pointer to a timeout value that is to be used if a timeout value is not specified when waiting for an instance of a named pipe. This parameter is only meaningful when the first instance of a named pipe is created. If neither CreateNamedPipe or WaitNamedPipe specify a timeout 50 milliseconds will be used. lpSecurityAttributes --An optional parameter that, if present and supported on the target system, supplies a security descriptor for the named pipe. This parameter includes an inheritance flag for the handle. If this parameter is not present, the handle is not inherited by child processes. Return Value: Returns one of the following: 0xFFFFFFFF --An error occurred. Call GetLastError for more information. Anything else --Returns a handle for use in the server side of subsequent named pipe operations. --*/ { NTSTATUS Status; OBJECT_ATTRIBUTES Obja; HANDLE Handle; UNICODE_STRING FileName; IO_STATUS_BLOCK IoStatusBlock; BOOLEAN TranslationStatus; LARGE_INTEGER Timeout; RTL_RELATIVE_NAME RelativeName; PVOID FreeBuffer; LPWSTR FilePart; ULONG CreateFlags; ULONG DesiredAccess; ULONG ShareAccess; ULONG MaxInstances; if ((nMaxInstances == 0) || (nMaxInstances > PIPE_UNLIMITED_INSTANCES)) { BaseSetLastNTError(STATUS_INVALID_PARAMETER); return INVALID_HANDLE_VALUE; } // Convert Win32 maximum Instances to Nt maximum instances. MaxInstances = (nMaxInstances == PIPE_UNLIMITED_INSTANCES)? 0xffffffff : nMaxInstances; TranslationStatus = RtlDosPathNameToNtPathName_U( lpName, &FileName, &FilePart, &RelativeName ); if ( !TranslationStatus ) { SetLastError(ERROR_PATH_NOT_FOUND); return INVALID_HANDLE_VALUE; } FreeBuffer = FileName.Buffer; if ( RelativeName.RelativeName.Length ) { FileName = *(PUNICODE_STRING)&RelativeName.RelativeName; } else { RelativeName.ContainingDirectory = NULL; } InitializeObjectAttributes( &Obja, &FileName, OBJ_CASE_INSENSITIVE, RelativeName.ContainingDirectory, NULL ); if ( ARGUMENT_PRESENT(lpSecurityAttributes) ) { Obja.SecurityDescriptor = lpSecurityAttributes->lpSecurityDescriptor; if ( lpSecurityAttributes->bInheritHandle ) { Obja.Attributes |= OBJ_INHERIT; } } // End of code common with fileopcr.c CreateFile() CreateFlags = (dwOpenMode & FILE_FLAG_WRITE_THROUGH ? FILE_WRITE_THROUGH : 0 ); CreateFlags |= (dwOpenMode & FILE_FLAG_OVERLAPPED ? 0 : FILE_SYNCHRONOUS_IO_NONALERT); // // Determine the timeout. Convert from milliseconds to an Nt delta time // if ( nDefaultTimeOut ) { Timeout.QuadPart = - (LONGLONG)UInt32x32To64( 10 * 1000, nDefaultTimeOut ); } else { // Default timeout is 50 Milliseconds Timeout.QuadPart = -10 * 1000 * 50; } // Check no reserved bits are set by mistake. if (( dwOpenMode & ~(PIPE_ACCESS_DUPLEX | FILE_FLAG_OVERLAPPED | FILE_FLAG_WRITE_THROUGH | WRITE_DAC | WRITE_OWNER | ACCESS_SYSTEM_SECURITY ))|| ( dwPipeMode & ~(PIPE_NOWAIT | PIPE_READMODE_MESSAGE | PIPE_TYPE_MESSAGE ))) { RtlFreeHeap(RtlProcessHeap(),0,FreeBuffer); BaseSetLastNTError(STATUS_INVALID_PARAMETER); return INVALID_HANDLE_VALUE; } // // Translate the open mode into a sharemode to restrict the clients access // and derive the appropriate local desired access. // switch ( dwOpenMode & PIPE_ACCESS_DUPLEX ) { case PIPE_ACCESS_INBOUND: ShareAccess = FILE_SHARE_WRITE; DesiredAccess = GENERIC_READ; break; case PIPE_ACCESS_OUTBOUND: ShareAccess = FILE_SHARE_READ; DesiredAccess = GENERIC_WRITE; break; case PIPE_ACCESS_DUPLEX: ShareAccess = FILE_SHARE_READ | FILE_SHARE_WRITE; DesiredAccess = GENERIC_READ | GENERIC_WRITE; break; default: RtlFreeHeap(RtlProcessHeap(),0,FreeBuffer); BaseSetLastNTError(STATUS_INVALID_PARAMETER); return INVALID_HANDLE_VALUE; } DesiredAccess |= SYNCHRONIZE | ( dwOpenMode & (WRITE_DAC | WRITE_OWNER | ACCESS_SYSTEM_SECURITY )); Status = NtCreateNamedPipeFile ( &Handle, DesiredAccess, &Obja, &IoStatusBlock, ShareAccess, FILE_OPEN_IF, // Create first instance or subsequent CreateFlags, // Create Options dwPipeMode & PIPE_TYPE_MESSAGE ? FILE_PIPE_MESSAGE_TYPE : FILE_PIPE_BYTE_STREAM_TYPE, dwPipeMode & PIPE_READMODE_MESSAGE ? FILE_PIPE_MESSAGE_MODE : FILE_PIPE_BYTE_STREAM_MODE, dwPipeMode & PIPE_NOWAIT ? FILE_PIPE_COMPLETE_OPERATION : FILE_PIPE_QUEUE_OPERATION, MaxInstances, // Max instances nInBufferSize, // Inbound quota nOutBufferSize, // Outbound quota (PLARGE_INTEGER)&Timeout ); if ( Status == STATUS_NOT_SUPPORTED || Status == STATUS_INVALID_DEVICE_REQUEST ) { // // The request must have been processed by some other device driver // (other than NPFS). Map the error to something reasonable. // Status = STATUS_OBJECT_NAME_INVALID; } RtlFreeHeap(RtlProcessHeap(),0,FreeBuffer); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return INVALID_HANDLE_VALUE; } return Handle; } BOOL APIENTRY ConnectNamedPipe( HANDLE hNamedPipe, LPOVERLAPPED lpOverlapped ) /*++ Routine Description: The ConnectNamedPipe function is used by the server side of a named pipe to wait for a client to connect to the named pipe with a CreateFile request. The handle provided with the call to ConnectNamedPipe must have been previously returned by a successful call to CreateNamedPipe. The pipe must be in the disconnected, listening or connected states for ConnectNamedPipe to succeed. The behavior of this call depends on the blocking/nonblocking mode selected with the PIPE_WAIT/PIPE_NOWAIT flags when the server end of the pipe was created with CreateNamedPipe. If blocking mode is specified, ConnectNamedPipe will change the state from disconnected to listening and block. When a client connects with a CreateFile, the state will be changed from listening to connected and the ConnectNamedPipe returns TRUE. When the file handle is created with FILE_FLAG_OVERLAPPED on a blocking mode pipe, the lpOverlapped parameter can be specified. This allows the caller to continue processing while the ConnectNamedPipe API awaits a connection. When the pipe enters the signalled state the event is set to the signalled state. When nonblocking is specified ConnectNamedPipe will not block. On the first call the state will change from disconnected to listening. When a client connects with an Open the state will be changed from listening to connected. The ConnectNamedPipe will return FALSE (with GetLastError returning ERROR_PIPE_LISTENING) until the state is changed to the listening state. Arguments: hNamedPipe - Supplies a Handle to the server side of a named pipe. lpOverlapped - Supplies an overlap structure to be used with the request. If NULL then the API will not return until the operation completes. When FILE_FLAG_OVERLAPPED is specified when the handle was created, ConnectNamedPipe may return ERROR_IO_PENDING to allow the caller to continue processing while the operation completes. The event (or File handle if hEvent=NULL) will be set to the not signalled state before ERROR_IO_PENDING is returned. The event will be set to the signalled state upon completion of the request. GetOverlappedResult is used to determine the error status. Return Value: TRUE -- The operation was successful, the pipe is in the connected state. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { NTSTATUS Status; IO_STATUS_BLOCK Iosb; if ( lpOverlapped ) { lpOverlapped->Internal = (DWORD)STATUS_PENDING; } Status = NtFsControlFile( hNamedPipe, (lpOverlapped==NULL)? NULL : lpOverlapped->hEvent, NULL, // ApcRoutine lpOverlapped ? ((DWORD)lpOverlapped->hEvent & 1 ? NULL : lpOverlapped) : NULL, (lpOverlapped==NULL) ? &Iosb : (PIO_STATUS_BLOCK)&lpOverlapped->Internal, FSCTL_PIPE_LISTEN, NULL, // InputBuffer 0, // InputBufferLength, NULL, // OutputBuffer 0 // OutputBufferLength ); if ( lpOverlapped == NULL && Status == STATUS_PENDING) { // Operation must complete before return & Iosb destroyed Status = NtWaitForSingleObject( hNamedPipe, FALSE, NULL ); if ( NT_SUCCESS(Status)) { Status = Iosb.Status; } } if (NT_SUCCESS( Status ) && Status != STATUS_PENDING ) { return TRUE; } else { BaseSetLastNTError(Status); return FALSE; } } BOOL APIENTRY DisconnectNamedPipe( HANDLE hNamedPipe ) /*++ Routine Description: The DisconnectNamedPipe function can be used by the server side of a named pipe to force the client side to close the client side's handle. (Note that the client side must still call CloseFile to do this.) The client will receive an error the next time it attempts to access the pipe. Disconnecting the pipe may cause data to be lost before the client reads it. (If the application wants to make sure that data is not lost, the serving side should call FlushFileBuffers before calling DisconnectNamedPipe.) Arguments: hNamedPipe - Supplies a Handle to the server side of a named pipe. Return Value: TRUE -- The operation was successful, the pipe is in the disconnected state. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { NTSTATUS Status; IO_STATUS_BLOCK Iosb; Status = NtFsControlFile( hNamedPipe, NULL, NULL, // ApcRoutine NULL, // ApcContext &Iosb, FSCTL_PIPE_DISCONNECT, NULL, // InputBuffer 0, // InputBufferLength, NULL, // OutputBuffer 0 // OutputBufferLength ); if ( Status == STATUS_PENDING) { // Operation must complete before return & Iosb destroyed Status = NtWaitForSingleObject( hNamedPipe, FALSE, NULL ); if ( NT_SUCCESS(Status)) { Status = Iosb.Status; } } if (NT_SUCCESS( Status )) { return TRUE; } else { BaseSetLastNTError(Status); return FALSE; } } BOOL APIENTRY GetNamedPipeHandleStateA( HANDLE hNamedPipe, LPDWORD lpState, LPDWORD lpCurInstances, LPDWORD lpMaxCollectionCount, LPDWORD lpCollectDataTimeout, LPSTR lpUserName, DWORD nMaxUserNameSize ) /*++ Routine Description: Ansi thunk to GetNamedPipeHandleStateW ---*/ { if ( ARGUMENT_PRESENT( lpUserName ) ) { BOOL b; NTSTATUS Status; ANSI_STRING AnsiUserName; UNICODE_STRING UnicodeUserName; UnicodeUserName.MaximumLength = (USHORT)(nMaxUserNameSize << 1); UnicodeUserName.Buffer = RtlAllocateHeap( RtlProcessHeap(),MAKE_TAG( TMP_TAG ), UnicodeUserName.MaximumLength ); AnsiUserName.Buffer = lpUserName; AnsiUserName.MaximumLength = (USHORT)nMaxUserNameSize; if ( !UnicodeUserName.Buffer ) { SetLastError(ERROR_NOT_ENOUGH_MEMORY); return FALSE; } b = GetNamedPipeHandleStateW( hNamedPipe, lpState, lpCurInstances, lpMaxCollectionCount, lpCollectDataTimeout, UnicodeUserName.Buffer, UnicodeUserName.MaximumLength/2); if ( b ) { // Set length correctly in UnicodeUserName RtlInitUnicodeString( &UnicodeUserName, UnicodeUserName.Buffer ); Status = RtlUnicodeStringToAnsiString( &AnsiUserName, &UnicodeUserName, FALSE ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); b = FALSE; } } if ( UnicodeUserName.Buffer ) { RtlFreeHeap(RtlProcessHeap(),0,UnicodeUserName.Buffer); } return b; } else { return GetNamedPipeHandleStateW( hNamedPipe, lpState, lpCurInstances, lpMaxCollectionCount, lpCollectDataTimeout, NULL, 0); } } BOOL APIENTRY GetNamedPipeHandleStateW( HANDLE hNamedPipe, LPDWORD lpState, LPDWORD lpCurInstances, LPDWORD lpMaxCollectionCount, LPDWORD lpCollectDataTimeout, LPWSTR lpUserName, DWORD nMaxUserNameSize ) /*++ Routine Description: The GetNamedPipeHandleState function retrieves information about a given named pipe handle. The information returned by this function can vary during the lifetime of an instance of a named pipe. The handle must be created with the GENERIC_READ access rights. Arguments: hNamedPipe - Supplies the handle of an opened named pipe. lpState - An optional parameter that if non-null, points to a DWORD which will be set with flags indicating the current state of the handle. The following flags may be specified: PIPE_NOWAIT Nonblocking mode is to be used for this handle. PIPE_READMODE_MESSAGE Read the pipe as a message stream. If this flag is not set, the pipe is read as a byte stream. lpCurInstances - An optional parameter that if non-null, points to a DWORD which will be set with the number of current pipe instances. lpMaxCollectionCount - If non-null, this points to a DWORD which will be set to the maximum number of bytes that will be collected on the clients machine before transmission to the server. This parameter must be NULL on a handle to the server end of a named pipe or when client and server applications are on the same machine. lpCollectDataTimeout - If non-null, this points to a DWORD which will be set to the maximum time (in milliseconds) that can pass before a remote named pipe transfers information over the network. This parameter must be NULL if the handle is for the server end of a named pipe or when client and server applications are on the same machine. lpUserName - An optional parameter on the server end of a named pipe. Points to an area which will be filled-in with the null-terminated string containing the name of the username of the client application. This parameter is invalid if not NULL on a handle to a client end of a named pipe. nMaxUserNameSize - Size in characters of the memory allocated at lpUserName. Ignored if lpUserName is NULL. Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { IO_STATUS_BLOCK Iosb; NTSTATUS Status; if ( ARGUMENT_PRESENT( lpState ) ){ FILE_PIPE_INFORMATION Common; Status = NtQueryInformationFile( hNamedPipe, &Iosb, &Common, sizeof(FILE_PIPE_INFORMATION), FilePipeInformation ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return FALSE; } *lpState = (Common.CompletionMode == FILE_PIPE_QUEUE_OPERATION) ? PIPE_WAIT : PIPE_NOWAIT; *lpState |= (Common.ReadMode == FILE_PIPE_BYTE_STREAM_MODE) ? PIPE_READMODE_BYTE : PIPE_READMODE_MESSAGE; } if (ARGUMENT_PRESENT( lpCurInstances ) ){ FILE_PIPE_LOCAL_INFORMATION Local; Status = NtQueryInformationFile( hNamedPipe, &Iosb, &Local, sizeof(FILE_PIPE_LOCAL_INFORMATION), FilePipeLocalInformation ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return FALSE; } if (Local.CurrentInstances >= PIPE_UNLIMITED_INSTANCES) { *lpCurInstances = PIPE_UNLIMITED_INSTANCES; } else { *lpCurInstances = Local.CurrentInstances; } } if (ARGUMENT_PRESENT( lpMaxCollectionCount ) || ARGUMENT_PRESENT( lpCollectDataTimeout ) ) { FILE_PIPE_REMOTE_INFORMATION Remote; Status = NtQueryInformationFile( hNamedPipe, &Iosb, &Remote, sizeof(FILE_PIPE_REMOTE_INFORMATION), FilePipeRemoteInformation ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return FALSE; } if (ARGUMENT_PRESENT( lpMaxCollectionCount ) ) { *lpMaxCollectionCount = Remote.MaximumCollectionCount; } if (ARGUMENT_PRESENT( lpCollectDataTimeout ) ) { LARGE_INTEGER TimeWorkspace; LARGE_INTEGER LiTemporary; // Convert delta NT LARGE_INTEGER to milliseconds delay LiTemporary.QuadPart = -Remote.CollectDataTime.QuadPart; TimeWorkspace = RtlExtendedLargeIntegerDivide ( LiTemporary, 10000, NULL ); // Not interested in any remainder if ( TimeWorkspace.HighPart ) { // // Timeout larger than we can return- but not infinity. // Must have been set with the direct NT Interface. // *lpCollectDataTimeout = 0xfffffffe; // Maximum we can set } else { *lpCollectDataTimeout = TimeWorkspace.LowPart; } } } if ( ARGUMENT_PRESENT( lpUserName ) ) { return NpGetUserNamep(hNamedPipe, lpUserName, nMaxUserNameSize ); } return TRUE; } BOOL NpGetUserNamep( HANDLE hNamedPipe, LPWSTR lpUserName, DWORD nMaxUserNameSize ) /*++ Routine Description: The NpGetUserNamep function retrieves user name for the client at the other end of the named pipe indicated by the handle. Arguments: hNamedPipe - Supplies the handle of an opened named pipe. lpUserName - Points to an area which will be filled-in with the null-terminated string containing the name of the username of the client application. This parameter is invalid if not NULL on a handle to a client end of a named pipe. nMaxUserNameSize - Size in characters of the memory allocated at lpUserName. Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { HANDLE hToken; NTSTATUS Status; DWORD Size = nMaxUserNameSize; BOOL res; HANDLE advapi32; REVERTTOSELF RevertToSelfp; GETUSERNAMEW GetUserNameWp; IMPERSONATENAMEDPIPECLIENT ImpersonateNamedPipeClientp; advapi32 = LoadLibrary("advapi32"); if (advapi32 == NULL ) { return FALSE; } RevertToSelfp = (REVERTTOSELF)GetProcAddress(advapi32,"RevertToSelf"); if ( RevertToSelfp == NULL) { FreeLibrary(advapi32); return FALSE; } GetUserNameWp = (GETUSERNAMEW)GetProcAddress(advapi32,"GetUserNameW"); if ( GetUserNameWp == NULL) { FreeLibrary(advapi32); return FALSE; } ImpersonateNamedPipeClientp = (IMPERSONATENAMEDPIPECLIENT)GetProcAddress(advapi32,"ImpersonateNamedPipeClient"); if ( ImpersonateNamedPipeClientp == NULL) { FreeLibrary(advapi32); return FALSE; } // Save whoever the thread is currently impersonating. Status = NtOpenThreadToken( NtCurrentThread(), TOKEN_IMPERSONATE, TRUE, &hToken ); (ImpersonateNamedPipeClientp)( hNamedPipe ); res = (GetUserNameWp)( lpUserName, &Size ); if ( !NT_SUCCESS( Status ) ) { // We were not impersonating anyone (RevertToSelfp)(); } else { // // Set thread back to whoever it was originally impersonating. // An error on this API overrides any error from GetUserNameW // Status = NtSetInformationThread( NtCurrentThread(), ThreadImpersonationToken, (PVOID)&hToken, (ULONG)sizeof(HANDLE) ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); FreeLibrary(advapi32); return FALSE; } } FreeLibrary(advapi32); return res; } BOOL APIENTRY SetNamedPipeHandleState( HANDLE hNamedPipe, LPDWORD lpMode, LPDWORD lpMaxCollectionCount, LPDWORD lpCollectDataTimeout ) /*++ Routine Description: The SetNamedPipeHandleState function is used to set the read mode and the blocking mode of a named pipe. On the client end of a remote named pipe this function can also control local buffering. The handle must be created with the GENERIC_WRITE access rights. Arguments: hNamedPipe - Supplies a handle to a named pipe. lpMode - If non-null, this points to a DWORD which supplies the new mode. The mode is a combination of a read-mode flag and a wait flag. The following values may be used: PIPE_READMODE_BYTE Read pipe as a byte stream. PIPE_READMODE_MESSAGE Read pipe as a message stream. PIPE_WAIT Blocking mode is to be used for this handle. PIPE_NOWAIT Nonblocking mode is to be used for this handle. lpMaxCollectionCount - If non-null, this points to a DWORD which supplies the maximum number of bytes that will be collected on the client machine before transmission to the server. This parameter must be NULL on a handle to the server end of a named pipe or when client and server applications are on the same machine. This parameter is ignored if the client specified write through when the handle was created. lpCollectDataTimeout - If non-null, this points to a DWORD which supplies the maximum time (in milliseconds) that can pass before a remote named pipe transfers information over the network. This parameter must be NULL if the handle is for the server end of a named pipe or when client and server applications are on the same machine. This parameter is ignored if the client specified write through when the handle was created. Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { IO_STATUS_BLOCK Iosb; NTSTATUS Status; if ( ARGUMENT_PRESENT( lpMode ) ){ FILE_PIPE_INFORMATION Common; if (*lpMode & INVALID_PIPE_MODE_BITS) { SetLastError(ERROR_INVALID_PARAMETER); return FALSE; } Common.ReadMode = ( *lpMode & PIPE_READMODE_MESSAGE ) ? FILE_PIPE_MESSAGE_MODE: FILE_PIPE_BYTE_STREAM_MODE; Common.CompletionMode = ( *lpMode & PIPE_NOWAIT ) ? FILE_PIPE_COMPLETE_OPERATION : FILE_PIPE_QUEUE_OPERATION; Status = NtSetInformationFile( hNamedPipe, &Iosb, &Common, sizeof(FILE_PIPE_INFORMATION), FilePipeInformation ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return FALSE; } } if ( ARGUMENT_PRESENT( lpMaxCollectionCount ) || ARGUMENT_PRESENT( lpCollectDataTimeout ) ){ FILE_PIPE_REMOTE_INFORMATION Remote; if ( ( lpMaxCollectionCount == NULL ) || ( lpCollectDataTimeout == NULL ) ){ // // User is setting only one of the two parameters so read // the other value. There is a small window where another // thread using the same handle could set the other value. // in this case the setting would be lost. // Status = NtQueryInformationFile( hNamedPipe, &Iosb, &Remote, sizeof(FILE_PIPE_REMOTE_INFORMATION), FilePipeRemoteInformation ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return FALSE; } } if (ARGUMENT_PRESENT( lpMaxCollectionCount ) ) { Remote.MaximumCollectionCount = *lpMaxCollectionCount; } if (ARGUMENT_PRESENT( lpCollectDataTimeout ) ) { // // Convert from milliseconds to an Nt delta time. // Remote.CollectDataTime.QuadPart = - (LONGLONG)UInt32x32To64( 10 * 1000, *lpCollectDataTimeout ); } Status = NtSetInformationFile( hNamedPipe, &Iosb, &Remote, sizeof(FILE_PIPE_REMOTE_INFORMATION), FilePipeRemoteInformation ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return FALSE; } } return TRUE; } BOOL APIENTRY GetNamedPipeInfo( HANDLE hNamedPipe, LPDWORD lpFlags, LPDWORD lpOutBufferSize, LPDWORD lpInBufferSize, LPDWORD lpMaxInstances ) /*++ Routine Description: The GetNamedPipeInfo function retrieves information about a named pipe. The information returned by this API is preserved the lifetime of an instance of a named pipe. The handle must be created with the GENERIC_READ access rights. Arguments: hNamedPipe - Supplies a handle to a named pipe. lpFlags - An optional parameter that if non-null, points to a DWORD which will be set with flags indicating the type of named pipe and handle. PIPE_END_SERVER The handle is the server end of a named pipe. PIPE_TYPE_MESSAGE The pipe is a message-stream pipe. If this flag is not set, the pipe is a byte-stream pipe. lpOutBufferSize - An optional parameter that if non-null, points to a DWORD which will be set with the size (in bytes) of the buffer for outgoing data. A return value of zero indicates the buffer is allocated as needed. lpInBufferSize - An optional parameter that if non-null, points to a DWORD which will be set with the size (in bytes) of the buffer for incoming data. A return value of zero indicates the buffer is allocated as needed. lpMaxInstances - An optional parameter that if non-null, points to a DWORD which will be set with the maximum number of pipe instances that can be created. Besides various numeric values, a special value may be returned for this. PIPE_UNLIMITED_INSTANCES Unlimited instances of the pipe can be created. This is an indicator that the maximum is requested; the value of the equate may be higher or lower than the actual implementation's limit, which may vary over time. Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { IO_STATUS_BLOCK Iosb; NTSTATUS Status; FILE_PIPE_LOCAL_INFORMATION Local; Status = NtQueryInformationFile( hNamedPipe, &Iosb, &Local, sizeof(FILE_PIPE_LOCAL_INFORMATION), FilePipeLocalInformation ); if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); return FALSE; } if (ARGUMENT_PRESENT( lpFlags ) ) { *lpFlags = (Local.NamedPipeEnd == FILE_PIPE_CLIENT_END) ? PIPE_CLIENT_END : PIPE_SERVER_END; *lpFlags |= (Local.NamedPipeType == FILE_PIPE_BYTE_STREAM_TYPE) ? PIPE_TYPE_BYTE : PIPE_TYPE_MESSAGE; } if (ARGUMENT_PRESENT( lpOutBufferSize ) ) { *lpOutBufferSize = Local.OutboundQuota; } if (ARGUMENT_PRESENT( lpInBufferSize ) ) { *lpInBufferSize = Local.InboundQuota; } if (ARGUMENT_PRESENT( lpMaxInstances ) ) { if (Local.MaximumInstances >= PIPE_UNLIMITED_INSTANCES) { *lpMaxInstances = PIPE_UNLIMITED_INSTANCES; } else { *lpMaxInstances = Local.MaximumInstances; } } return TRUE; } BOOL APIENTRY PeekNamedPipe( HANDLE hNamedPipe, LPVOID lpBuffer, DWORD nBufferSize, LPDWORD lpBytesRead, LPDWORD lpTotalBytesAvail, LPDWORD lpBytesLeftThisMessage ) /*++ Routine Description: The PeekNamedPipe function copies a named pipe's data into a buffer for preview without removing it. The results of a PeekNamedPipe are similar to a ReadFile on the pipe except more information is returned, the function never blocks and if the pipe handle is reading in message mode, a partial message can be returned. A partial message peek'd on a message mode pipe will return TRUE. It is not an error if all of the pointers passed to this function are null. However, there is no reason for calling it this way. The NT peek call has the received data immediately after the state information so this routine needs to allocate an intermediate buffer large enough for the state information plus data. Arguments: hNamedPipe - Supplies a handle to a named pipe. lpBuffer - If non-null, pointer to buffer to read data into. nBufferSize - Size of input buffer, in bytes. (Ignored if lpBuffer is null.) lpBytesRead - If non-null, this points to a DWORD which will be set with the number of bytes actually read. lpTotalBytesAvail - If non-null, this points to a DWORD which receives a value giving the number of bytes that were available to be read. lpBytesLeftThisMessage - If non-null, this points to a DWORD which will be set to the number of bytes left in this message. (This will be zero for a byte-stream pipe.) Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { IO_STATUS_BLOCK Iosb; NTSTATUS Status; PFILE_PIPE_PEEK_BUFFER PeekBuffer; DWORD IOLength; // Allocate enough for the users data and FILE_PIPE_PEEK_BUFFER IOLength = nBufferSize + FIELD_OFFSET(FILE_PIPE_PEEK_BUFFER, Data[0]); PeekBuffer = RtlAllocateHeap(RtlProcessHeap(),MAKE_TAG( TMP_TAG ), IOLength); try { Status = NtFsControlFile(hNamedPipe, NULL, NULL, // APC routine NULL, // APC Context &Iosb, // I/O Status block FSCTL_PIPE_PEEK,// IoControlCode NULL, // Buffer for data to the FS 0, // Length. PeekBuffer, // OutputBuffer for data from the FS IOLength // OutputBuffer Length ); if ( Status == STATUS_PENDING) { // Operation must complete before return & IoStatusBlock destroyed Status = NtWaitForSingleObject( hNamedPipe, FALSE, NULL ); if ( NT_SUCCESS(Status)) { Status = Iosb.Status; } } // // Buffer overflow simply means that lpBytesLeftThisMessage != 0 // if ( Status == STATUS_BUFFER_OVERFLOW ) { Status = STATUS_SUCCESS; } // // Peek is complete, package up data for caller ensuring that // the PeekBuffer is deleted even if an invalid pointer was given. // if ( NT_SUCCESS(Status)) { try { if ( ARGUMENT_PRESENT( lpTotalBytesAvail ) ) { *lpTotalBytesAvail = PeekBuffer->ReadDataAvailable; } if ( ARGUMENT_PRESENT( lpBytesRead ) ) { *lpBytesRead = Iosb.Information - FIELD_OFFSET(FILE_PIPE_PEEK_BUFFER, Data[0]); } if ( ARGUMENT_PRESENT( lpBytesLeftThisMessage ) ) { *lpBytesLeftThisMessage = PeekBuffer->MessageLength - (Iosb.Information - FIELD_OFFSET(FILE_PIPE_PEEK_BUFFER, Data[0])); } if ( ARGUMENT_PRESENT( lpBuffer ) ) { RtlCopyMemory( lpBuffer, PeekBuffer->Data, Iosb.Information - FIELD_OFFSET(FILE_PIPE_PEEK_BUFFER, Data[0])); } } except (EXCEPTION_EXECUTE_HANDLER) { Status = STATUS_ACCESS_VIOLATION; } } } finally { if ( PeekBuffer != NULL ) { RtlFreeHeap(RtlProcessHeap(),0,PeekBuffer); } } if ( NT_SUCCESS(Status) ) { return TRUE; } else { BaseSetLastNTError(Status); return FALSE; } } BOOL APIENTRY TransactNamedPipe( HANDLE hNamedPipe, LPVOID lpInBuffer, DWORD nInBufferSize, LPVOID lpOutBuffer, DWORD nOutBufferSize, LPDWORD lpBytesRead, LPOVERLAPPED lpOverlapped ) /*++ Routine Description: The TransactNamedPipe function writes data to and reads data from a named pipe. This function fails if the named pipe contains any unread data or if the named pipe is not in message mode. A named pipe's blocking state has no effect on the TransactNamedPipe function. This API does not complete until data is written into the InBuffer buffer. The lpOverlapped parameter is available to allow an application to continue processing while the operation takes place. Arguments: hNamedPipe - Supplies a handle to a named pipe. lpInBuffer - Supplies the buffer containing the data that is written to the pipe. nInBufferSize - Supplies the size (in bytes) of the output buffer. lpOutBuffer - Supplies the buffer that receives the data read from the pipe. nOutBufferSize - Supplies the size (in bytes) of the input buffer. lpBytesRead - Points to a DWORD that receives the number of bytes actually read from the pipe. lpOverlapped - An optional parameter that supplies an overlap structure to be used with the request. If NULL or the handle was created without FILE_FLAG_OVERLAPPED then the TransactNamedPipe will not return until the operation completes. When lpOverlapped is supplied and FILE_FLAG_OVERLAPPED was specified when the handle was created, TransactNamedPipeFile may return ERROR_IO_PENDING to allow the caller to continue processing while the operation completes. The event (or File handle if hEvent == NULL) will be set to the not signalled state before ERROR_IO_PENDING is returned. The event will be set to the signalled state upon completion of the request. GetOverlappedResult is used to determine the result when ERROR_IO_PENDING is returned. Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { NTSTATUS Status; if ( ARGUMENT_PRESENT( lpOverlapped ) ) { lpOverlapped->Internal = (DWORD)STATUS_PENDING; Status = NtFsControlFile(hNamedPipe, lpOverlapped->hEvent, NULL, // APC routine (DWORD)lpOverlapped->hEvent & 1 ? NULL : lpOverlapped, (PIO_STATUS_BLOCK)&lpOverlapped->Internal, FSCTL_PIPE_TRANSCEIVE,// IoControlCode lpInBuffer, // Buffer for data to the FS nInBufferSize, lpOutBuffer, // OutputBuffer for data from the FS nOutBufferSize // OutputBuffer Length ); if ( NT_SUCCESS(Status) && Status != STATUS_PENDING) { if ( ARGUMENT_PRESENT(lpBytesRead) ) { try { *lpBytesRead = lpOverlapped->InternalHigh; } except(EXCEPTION_EXECUTE_HANDLER) { *lpBytesRead = 0; } } return TRUE; } else { if ( NT_WARNING(Status) ) { if ( ARGUMENT_PRESENT(lpBytesRead) ) { try { *lpBytesRead = lpOverlapped->InternalHigh; } except(EXCEPTION_EXECUTE_HANDLER) { *lpBytesRead = 0; } } } BaseSetLastNTError(Status); return FALSE; } } else { IO_STATUS_BLOCK Iosb; Status = NtFsControlFile(hNamedPipe, NULL, NULL, // APC routine NULL, // APC Context &Iosb, FSCTL_PIPE_TRANSCEIVE,// IoControlCode lpInBuffer, // Buffer for data to the FS nInBufferSize, lpOutBuffer, // OutputBuffer for data from the FS nOutBufferSize // OutputBuffer Length ); if ( Status == STATUS_PENDING) { // Operation must complete before return & Iosb destroyed Status = NtWaitForSingleObject( hNamedPipe, FALSE, NULL ); if ( NT_SUCCESS(Status)) { Status = Iosb.Status; } } if ( NT_SUCCESS(Status) ) { *lpBytesRead = Iosb.Information; return TRUE; } else { if ( NT_WARNING(Status) ) { *lpBytesRead = Iosb.Information; } BaseSetLastNTError(Status); return FALSE; } } } BOOL APIENTRY CallNamedPipeA( LPCSTR lpNamedPipeName, LPVOID lpInBuffer, DWORD nInBufferSize, LPVOID lpOutBuffer, DWORD nOutBufferSize, LPDWORD lpBytesRead, DWORD nTimeOut ) /*++ ANSI thunk to CallNamedPipeW --*/ { PUNICODE_STRING Unicode; ANSI_STRING AnsiString; NTSTATUS Status; Unicode = &NtCurrentTeb()->StaticUnicodeString; RtlInitAnsiString(&AnsiString,lpNamedPipeName); Status = RtlAnsiStringToUnicodeString(Unicode,&AnsiString,FALSE); if ( !NT_SUCCESS(Status) ) { if ( Status == STATUS_BUFFER_OVERFLOW ) { SetLastError(ERROR_FILENAME_EXCED_RANGE); } else { BaseSetLastNTError(Status); } return FALSE; } return ( CallNamedPipeW( (LPCWSTR)Unicode->Buffer, lpInBuffer, nInBufferSize, lpOutBuffer, nOutBufferSize, lpBytesRead, nTimeOut) ); } BOOL APIENTRY CallNamedPipeW( LPCWSTR lpNamedPipeName, LPVOID lpInBuffer, DWORD nInBufferSize, LPVOID lpOutBuffer, DWORD nOutBufferSize, LPDWORD lpBytesRead, DWORD nTimeOut ) /*++ Routine Description: CallNamedPipe is equivalent to a series of calls to CreateFile, perhaps WaitNamedPipe (if CreateFile can't open the pipe immediately), SetNamedPipeHandleState, TransactNamedPipe, and CloseFile. Refer to the documentation for those APIs for more information. Arguments: lpNamedPipeName - Supplies the name of the named pipe. lpInBuffer - Supplies the buffer containing the data that is written to the pipe. nInBufferSize - Supplies the size (in bytes) of the output buffer. lpOutBuffer - Supplies the buffer that receives the data read from the pipe. nOutBufferSize - Supplies the size (in bytes) of the input buffer. lpBytesRead - Points to a DWORD that receives the number of bytes actually read from the pipe. nTimeOut - Gives a value (in milliseconds) that is the amount of time this function should wait for the pipe to become available. (Note that the function may take longer than that to execute, due to various factors.) Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { HANDLE Pipe; BOOL FirstChance = TRUE; // Allow only one chance at WaitNamedPipe BOOL Result; while ( 1 ) { Pipe = CreateFileW(lpNamedPipeName, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, // Security Attributes OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL ); if ( Pipe != (HANDLE)0xffffffff ) { break; // Created a handle } if ( FirstChance == FALSE ) { // Already called WaitNamedPipe once so give up. return FALSE; } WaitNamedPipeW(lpNamedPipeName, nTimeOut); FirstChance = FALSE; } try { DWORD ReadMode = PIPE_READMODE_MESSAGE | PIPE_WAIT; // Default open is readmode byte stream- change to message mode. Result = SetNamedPipeHandleState( Pipe, &ReadMode, NULL, NULL); if ( Result == TRUE ) { Result = TransactNamedPipe( Pipe, lpInBuffer, nInBufferSize, lpOutBuffer, nOutBufferSize, lpBytesRead, NULL); } } finally { CloseHandle( Pipe ); } return Result; } BOOL APIENTRY WaitNamedPipeA( LPCSTR lpNamedPipeName, DWORD nTimeOut ) /*++ Ansi thunk to WaitNamedPipeW --*/ { NTSTATUS Status; UNICODE_STRING UnicodeString; ANSI_STRING AnsiString; BOOL b; RtlInitAnsiString(&AnsiString,lpNamedPipeName); Status = Basep8BitStringToUnicodeString(&UnicodeString,&AnsiString,TRUE); if ( !NT_SUCCESS(Status) ) { if ( Status == STATUS_BUFFER_OVERFLOW ) { SetLastError(ERROR_FILENAME_EXCED_RANGE); } else { BaseSetLastNTError(Status); } return FALSE; } b = WaitNamedPipeW( UnicodeString.Buffer, nTimeOut ); RtlFreeUnicodeString(&UnicodeString); return b; } BOOL APIENTRY WaitNamedPipeW( LPCWSTR lpNamedPipeName, DWORD nTimeOut ) /*++ Routine Description: The WaitNamedPipe function waits for a named pipe to become available. Arguments: lpNamedPipeName - Supplies the name of the named pipe. nTimeOut - Gives a value (in milliseconds) that is the amount of time this function should wait for the pipe to become available. (Note that the function may take longer than that to execute, due to various factors.) nTimeOut Special Values: NMPWAIT_WAIT_FOREVER No timeout. NMPWAIT_USE_DEFAULT_WAIT Use default timeout set in call to CreateNamedPipe. Return Value: TRUE -- The operation was successful. FALSE -- The operation failed. Extended error status is available using GetLastError. --*/ { IO_STATUS_BLOCK Iosb; OBJECT_ATTRIBUTES Obja; NTSTATUS Status; RTL_PATH_TYPE PathType; ULONG WaitPipeLength; PFILE_PIPE_WAIT_FOR_BUFFER WaitPipe; PWSTR FreeBuffer; UNICODE_STRING FileSystem; UNICODE_STRING PipeName; UNICODE_STRING OriginalPipeName; UNICODE_STRING ValidUnicodePrefix; HANDLE Handle; IO_STATUS_BLOCK IoStatusBlock; LPWSTR Pwc; ULONG Index; // // Open a handle either to the redirector or the NPFS depending on // the start of the pipe name. Split lpNamedPipeName into two // halves as follows: // \\.\pipe\pipename \\.\pipe\ and pipename // \\server\pipe\pipename \\ and server\pipe\pipename // if (!RtlCreateUnicodeString( &OriginalPipeName, lpNamedPipeName)) { SetLastError(ERROR_NOT_ENOUGH_MEMORY); return FALSE; } // // Change all the forward slashes into backward slashes. // for ( Index =0; Index < (OriginalPipeName.Length/sizeof(WCHAR)); Index++ ) { if (OriginalPipeName.Buffer[Index] == L'/') { OriginalPipeName.Buffer[Index] = L'\\'; } } PipeName = OriginalPipeName; PathType = RtlDetermineDosPathNameType_U(lpNamedPipeName); FreeBuffer = NULL; switch ( PathType ) { case RtlPathTypeLocalDevice: // Name should be of the form \\.\pipe\pipename (IgnoreCase) RtlInitUnicodeString( &ValidUnicodePrefix, DOS_LOCAL_PIPE_PREFIX); if (RtlPrefixString((PSTRING)&ValidUnicodePrefix, (PSTRING)&PipeName, TRUE) == FALSE) { RtlFreeUnicodeString(&ValidUnicodePrefix); RtlFreeUnicodeString(&OriginalPipeName); BaseSetLastNTError(STATUS_OBJECT_PATH_SYNTAX_BAD); return FALSE; } // Skip first 9 characters "\\.\pipe\" PipeName.Buffer+=9; PipeName.Length-=9*sizeof(WCHAR); RtlInitUnicodeString( &FileSystem, DOS_LOCAL_PIPE); break; case RtlPathTypeUncAbsolute: // Name is of the form \\server\pipe\pipename // Find the pipe name. for ( Pwc = &PipeName.Buffer[2]; *Pwc != 0; Pwc++) { if ( *Pwc == L'\\') { // Found backslash after servername break; } } if ( (*Pwc != 0) && ( _wcsnicmp( Pwc + 1, L"pipe\\", 5 ) == 0 ) ) { // Temporarily, break this up into 2 strings // string1 = \\server\pipe // string2 = the-rest Pwc += (sizeof (L"pipe\\") / sizeof( WCHAR ) ) - 1; } else { // This is not a valid remote path name. RtlFreeUnicodeString(&OriginalPipeName); BaseSetLastNTError(STATUS_OBJECT_PATH_SYNTAX_BAD); return FALSE; } // Pwc now points to the first path seperator after \\server\pipe. // Attempt to open \DosDevices\Unc\Servername\Pipe. PipeName.Buffer = &PipeName.Buffer[2]; PipeName.Length = (USHORT)((PCHAR)Pwc - (PCHAR)PipeName.Buffer); PipeName.MaximumLength = PipeName.Length; FileSystem.MaximumLength = (USHORT)sizeof( DOS_REMOTE_PIPE ) + PipeName.MaximumLength; FileSystem.Buffer = RtlAllocateHeap( RtlProcessHeap(),MAKE_TAG( TMP_TAG ), FileSystem.MaximumLength ); if ( !FileSystem.Buffer ) { SetLastError(ERROR_NOT_ENOUGH_MEMORY); RtlFreeUnicodeString(&OriginalPipeName); return FALSE; } FreeBuffer = FileSystem.Buffer; RtlCopyMemory( FileSystem.Buffer, DOS_REMOTE_PIPE, sizeof( DOS_REMOTE_PIPE ) - sizeof(WCHAR) ); FileSystem.Length = sizeof( DOS_REMOTE_PIPE ) - sizeof(WCHAR); RtlAppendUnicodeStringToString( &FileSystem, &PipeName ); // Set up pipe name, skip leading backslashes. RtlInitUnicodeString( &PipeName, (PWCH)Pwc + 1 ); break; default: BaseSetLastNTError(STATUS_OBJECT_PATH_SYNTAX_BAD); RtlFreeUnicodeString(&OriginalPipeName); return FALSE; } InitializeObjectAttributes( &Obja, &FileSystem, OBJ_CASE_INSENSITIVE, NULL, NULL ); Status = NtOpenFile( &Handle, (ACCESS_MASK)FILE_READ_ATTRIBUTES | SYNCHRONIZE, &Obja, &IoStatusBlock, FILE_SHARE_READ | FILE_SHARE_WRITE, FILE_SYNCHRONOUS_IO_NONALERT ); if (FreeBuffer != NULL) { RtlFreeHeap(RtlProcessHeap(),0,FreeBuffer); } if ( !NT_SUCCESS(Status) ) { BaseSetLastNTError(Status); RtlFreeUnicodeString(&OriginalPipeName); return FALSE; } WaitPipeLength = FIELD_OFFSET(FILE_PIPE_WAIT_FOR_BUFFER, Name[0]) + PipeName.Length; WaitPipe = RtlAllocateHeap(RtlProcessHeap(), MAKE_TAG( TMP_TAG ), WaitPipeLength); if ( !WaitPipe ) { SetLastError(ERROR_NOT_ENOUGH_MEMORY); RtlFreeUnicodeString(&OriginalPipeName); return FALSE; } if ( nTimeOut == NMPWAIT_USE_DEFAULT_WAIT ) { WaitPipe->TimeoutSpecified = FALSE; } else { if ( nTimeOut == NMPWAIT_WAIT_FOREVER ) { WaitPipe->Timeout.LowPart = 0; WaitPipe->Timeout.HighPart =0x80000000; } else { // // Convert from milliseconds to an Nt delta time. // WaitPipe->Timeout.QuadPart = - (LONGLONG)UInt32x32To64( 10 * 1000, nTimeOut ); } WaitPipe->TimeoutSpecified = TRUE; } WaitPipe->NameLength = PipeName.Length; RtlCopyMemory( WaitPipe->Name, PipeName.Buffer, PipeName.Length ); RtlFreeUnicodeString(&OriginalPipeName); Status = NtFsControlFile(Handle, NULL, NULL, // APC routine NULL, // APC Context &Iosb, FSCTL_PIPE_WAIT,// IoControlCode WaitPipe, // Buffer for data to the FS WaitPipeLength, NULL, // OutputBuffer for data from the FS 0 // OutputBuffer Length ); RtlFreeHeap(RtlProcessHeap(),0,WaitPipe); NtClose(Handle); if (NT_SUCCESS( Status ) ) { return TRUE; } else { BaseSetLastNTError(Status); return FALSE; } }