diff options
Diffstat (limited to 'Linux')
| -rw-r--r-- | Linux/README | 88 |
1 files changed, 49 insertions, 39 deletions
diff --git a/Linux/README b/Linux/README index 4f9b9a6..a181796 100644 --- a/Linux/README +++ b/Linux/README @@ -1,4 +1,4 @@ -Heimdall (c) 2010-2011 Benjamin Dobell, Glass Echidna
+Heimdall (c) 2010-2012 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/products/heimdall/
DISCLAIMER:
@@ -84,11 +84,12 @@ Performing a Custom Flash with Heimdall Frontend: This is the advanced means of flashing firmware to your device.
If you're not an advanced user or a developer, in the event that a Heimdall
- Firmware Package doesn't exist for the particular firmware (or files) that
- you wish to flash, then I strongly recommend you get in touch with developer
- of the firmware (or files) and politely ask them to create a Heimdall
- Firmware Package for you. In doing so then you don't have to worry about
- making mistakes due to inexperience.
+ Firmware Package doesn't exist for the particular firmware (or files) that + you wish to flash, then I strongly recommend you get in touch with the + developer of the firmware (or files) and politely ask them to create a + Heimdall Firmware Package for you. In doing so, you avoid the risk of + making mistakes due to inexperience. +
If you're looking to customise an existing Heimdall Firmware Package then
follow steps 1-8 of "Flashing Heimdall Firmware Package with Heimdall
@@ -104,7 +105,8 @@ Performing a Custom Flash with Heimdall Frontend: as multiple archives (nested or otherwise), extract them all to the same
location.
- NOTE: If you want to use the CSC then extract it last.
+ NOTE: If you want to use the CSC then extract it last. If you're asked
+ to overwrite files then do so.
3. Open the a terminal and run Heimdall Frontend by typing:
@@ -116,14 +118,14 @@ Performing a Custom Flash with Heimdall Frontend: 5. Before you can chose which partitions you want to flash with particular
files you MUST first select a PIT file. To do this click the "Browse"
button in the "PIT" section. This will open a dialogue allowing you to
- navigate to and select a valid PIT (.pit) file.
+ navigate to and select a valid PIT (.pit) file. - If you do not already have a valid PIT file stored on your computer you
- can download your device's PIT file from the "Utilities" tab.
-
- 6. If a valid PIT file has been selected then "Add" button below the
- "Partitions (Files)" list-box will become enabled. Press this button to
- add a partition to your flash.
+ If you do not already have a valid PIT file stored on your computer you + can download your device's PIT file from the "Utilities" tab. + + 6. If a valid PIT file has been selected then the "Add" button below the + "Partitions (Files)" list-box will be enabled. Press this button to add + a partition to your flash. 7. When you first add a partition you will see the "Partition Name" and
"Partition ID" be populated with information. Use the "Partition Name"
@@ -229,8 +231,7 @@ How to Create a Heimdall Firmware Package: create a package from scratch, or you can load an existing package, apply
modifications and then save the package. Creating a package from scratch
is the preferred approach, by taking this approach you're far less likely
- to run into file name length limitations. These are not Heimdall's own
- limitation but rather a limitation of the TAR archive format.
+ to run into file name length limitations.
Before you can access Heimdall Frontend's firmware creation functionality
(available from the "Create Package" tab) you must first specify which
@@ -254,14 +255,14 @@ How to Create a Heimdall Firmware Package: Firmware Name - This is the name of your particular firmware. An
example would be "Cyanogenmod".
- Firmware Version - This is the version identifier for your package. Any
- valid string will be accepted although a the inclusion of decimal
- point version number is preferred i.e. "7.1". If it makes sense
- then feel free to append a text string like "RC1" or "Beta 1" to
- the decimal point version.
+ Firmware Version - This is the version identifier for your package. Any + valid string will be accepted, although the inclusion of decimal + point version number is preferred i.e. "7.1". If it makes sense + then feel free to append a text string like "RC1" or "Beta 1" to + the decimal point version. - Platform Name - This is the name of the platform (or operating system)
- that your firmware is based on. In most cases this will simply be
+ Platform Name - This is the name of platform (or operating system) that
+ your firmware is based on. In most cases this will simply be
"Android".
Platform Version - This is the operating system version that your
@@ -295,8 +296,8 @@ How to Create a Heimdall Firmware Package: team name. Click "Add" and the developer will be added to the list
on the right. If you make a mistake you can select a developer from
the list and click "Remove". You can list as many developers as you
- like however visual constraints of the "Load Package" tab means
- only a few names will be visible. Where possible you may want to
+ like, however visual constraints of the "Load Package" tab means + only a few names will be visible. Where possible you may want to opt for team names over listing individual team members.
@@ -359,8 +360,9 @@ for the format in their own software. All Heimdall Firmware Packages must contain a file called firmware.xml. This
-file stores flash information and meta-data for the package as well as
-information about other files contained within the package.
+file stores flash information and meta-data for the package as well as +information about other files contained within the package. +
The format is fairly straight-forward so it won't be explained in great detail.
Nonetheless the following is an example of a valid firmware.xml file.
@@ -458,20 +460,28 @@ be included. -
Appendix B - Installing Heimdall from Source:
- 1. First make sure you have installed build-tools, pkgconfig, zlib-dev and
- libusb-1.0-dev (v1.0.8 or newer).
-
+ 1. First make sure you have installed build-tools, pkgconfig, zlib-dev and + libusb-1.0-dev (v1.0.8 or newer). + NOTE: Package names may not be absolutely identical to those above.
2. Open a terminal and navigate to the directory you downloaded,
or extracted, Heimdall to.
- 3. Enter the following commands to compile libpit.
+ 3. Enter the following commands to compile libpit:
cd libpit
+ ./configure + make + cd ..
+
+ If you have problems please consult http://www.libusb.org/
+
+ 4. Enter the following commands to compile libpit.
+
+ cd libusb-1.0
./configure
make
cd ..
@@ -486,11 +496,11 @@ Appendix B - Installing Heimdall from Source: sudo make install
cd ..
- NOTE: As an alternative to "sudo make install" you may chose to generate
- a package by typing the following:
-
- sudo checkinstall --pkgversion <version>
-
+ NOTE: As an alternative to "sudo make install" you may chose to generate + a package by typing the following: + + sudo checkinstall --pkgversion <version> + Where <version> is the current Heimdall release e.g. 1.3.0
5. Done
@@ -510,9 +520,9 @@ Appendix C - Installing Heimdall Frontend from Source: 4. Enter the following commands to compile and install Heimdall Frontend:
cd heimdall-frontend
- qmake heimdall-frontend.pro
+ qmake-qt4 heimdall-frontend.pro
make
- sudo make install
+ sudo make install NOTE: As an alternative to "sudo make install" you may chose to generate
a package by typing the following:
|