1 files changed, 2220 insertions, 0 deletions

diff --git a/libusb-1.0/libusb/os/linux_usbfs.c b/libusb-1.0/libusb/os/linux_usbfs.c
new file mode 100644
index 0000000..5c2a6e8
--- /dev/null
+++ b/libusb-1.0/libusb/os/linux_usbfs.c
@@ -0,0 +1,2220 @@
+/*
+ * Linux usbfs backend for libusb
+ * Copyright (C) 2007-2009 Daniel Drake <dsd@gentoo.org>
+ * Copyright (c) 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+#include <ctype.h>
+#include <dirent.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/utsname.h>
+#include <unistd.h>
+
+#include "libusb.h"
+#include "libusbi.h"
+#include "linux_usbfs.h"
+
+/* sysfs vs usbfs:
+ * opening a usbfs node causes the device to be resumed, so we attempt to
+ * avoid this during enumeration.
+ *
+ * sysfs allows us to read the kernel's in-memory copies of device descriptors
+ * and so forth, avoiding the need to open the device:
+ *  - The binary "descriptors" file was added in 2.6.23.
+ *  - The "busnum" file was added in 2.6.22
+ *  - The "devnum" file has been present since pre-2.6.18
+ *  - the "bConfigurationValue" file has been present since pre-2.6.18
+ *
+ * If we have bConfigurationValue, busnum, and devnum, then we can determine
+ * the active configuration without having to open the usbfs node in RDWR mode.
+ * We assume this is the case if we see the busnum file (indicates 2.6.22+).
+ * The busnum file is important as that is the only way we can relate sysfs
+ * devices to usbfs nodes.
+ *
+ * If we also have descriptors, we can obtain the device descriptor and active 
+ * configuration without touching usbfs at all.
+ *
+ * The descriptors file originally only contained the active configuration
+ * descriptor alongside the device descriptor, but all configurations are
+ * included as of Linux 2.6.26.
+ */
+
+/* endianness for multi-byte fields:
+ *
+ * Descriptors exposed by usbfs have the multi-byte fields in the device
+ * descriptor as host endian. Multi-byte fields in the other descriptors are
+ * bus-endian. The kernel documentation says otherwise, but it is wrong.
+ */
+
+static const char *usbfs_path = NULL;
+
+/* Linux 2.6.32 adds support for a bulk continuation URB flag. this basically
+ * allows us to mark URBs as being part of a specific logical transfer when
+ * we submit them to the kernel. then, on any error error except a
+ * cancellation, all URBs within that transfer will be cancelled with the
+ * endpoint is disabled, meaning that no more data can creep in during the
+ * time it takes to cancel the remaining URBs.
+ *
+ * The BULK_CONTINUATION flag must be set on all URBs within a bulk transfer
+ * (in either direction) except the first.
+ * For IN transfers, we must also set SHORT_NOT_OK on all the URBs.
+ * For OUT transfers, SHORT_NOT_OK must not be set. The effective behaviour
+ * (where an OUT transfer does not complete, the rest of the URBs in the
+ * transfer get cancelled) is already in effect, and setting this flag is
+ * disallowed (a kernel with USB debugging enabled will reject such URBs).
+ */
+static int supports_flag_bulk_continuation = -1;
+
+/* clock ID for monotonic clock, as not all clock sources are available on all
+ * systems. appropriate choice made at initialization time. */
+static clockid_t monotonic_clkid = -1;
+
+/* do we have a busnum to relate devices? this also implies that we can read
+ * the active configuration through bConfigurationValue */
+static int sysfs_can_relate_devices = -1;
+
+/* do we have a descriptors file? */
+static int sysfs_has_descriptors = -1;
+
+struct linux_device_priv {
+	char *sysfs_dir;
+	unsigned char *dev_descriptor;
+	unsigned char *config_descriptor;
+};
+
+struct linux_device_handle_priv {
+	int fd;
+};
+
+enum reap_action {
+	NORMAL = 0,
+	/* submission failed after the first URB, so await cancellation/completion
+	 * of all the others */
+	SUBMIT_FAILED,
+
+	/* cancelled by user or timeout */
+	CANCELLED,
+
+	/* completed multi-URB transfer in non-final URB */
+	COMPLETED_EARLY,
+
+	/* one or more urbs encountered a low-level error */
+	ERROR,
+};
+
+struct linux_transfer_priv {
+	union {
+		struct usbfs_urb *urbs;
+		struct usbfs_urb **iso_urbs;
+	};
+
+	enum reap_action reap_action;
+	int num_urbs;
+	unsigned int num_retired;
+	enum libusb_transfer_status reap_status;
+
+	/* next iso packet in user-supplied transfer to be populated */
+	int iso_packet_offset;
+};
+
+static void __get_usbfs_path(struct libusb_device *dev, char *path)
+{
+	snprintf(path, PATH_MAX, "%s/%03d/%03d", usbfs_path, dev->bus_number,
+		dev->device_address);
+}
+
+static struct linux_device_priv *__device_priv(struct libusb_device *dev)
+{
+	return (struct linux_device_priv *) dev->os_priv;
+}
+
+static struct linux_device_handle_priv *__device_handle_priv(
+	struct libusb_device_handle *handle)
+{
+	return (struct linux_device_handle_priv *) handle->os_priv;
+}
+
+static int check_usb_vfs(const char *dirname)
+{
+	DIR *dir;
+	struct dirent *entry;
+	int found = 0;
+
+	dir = opendir(dirname);
+	if (!dir)
+		return 0;
+
+	while ((entry = readdir(dir)) != NULL) {
+		if (entry->d_name[0] == '.')
+			continue;
+
+		/* We assume if we find any files that it must be the right place */
+		found = 1;
+		break;
+	}
+
+	closedir(dir);
+	return found;
+}
+
+static const char *find_usbfs_path(void)
+{
+	const char *path = "/dev/bus/usb";
+	const char *ret = NULL;
+
+	if (check_usb_vfs(path)) {
+		ret = path;
+	} else {
+		path = "/proc/bus/usb";
+		if (check_usb_vfs(path))
+			ret = path;
+	}
+
+	usbi_dbg("found usbfs at %s", ret);
+	return ret;
+}
+
+/* the monotonic clock is not usable on all systems (e.g. embedded ones often
+ * seem to lack it). fall back to REALTIME if we have to. */
+static clockid_t find_monotonic_clock(void)
+{
+	struct timespec ts;
+	int r;
+
+#ifdef CLOCK_MONOTONIC
+	/* Linux 2.6.28 adds CLOCK_MONOTONIC_RAW but we don't use it
+	 * because it's not available through timerfd */
+	r = clock_gettime(CLOCK_MONOTONIC, &ts);
+	if (r == 0)
+		return CLOCK_MONOTONIC;
+	usbi_dbg("monotonic clock doesn't work, errno %d", errno);
+#endif
+
+	return CLOCK_REALTIME;
+}
+
+/* bulk continuation URB flag available from Linux 2.6.32 */
+static int check_flag_bulk_continuation(void)
+{
+	struct utsname uts;
+	int sublevel;
+
+	if (uname(&uts) < 0)
+		return -1;
+	if (strlen(uts.release) < 4)
+		return 0;
+	if (strncmp(uts.release, "2.6.", 4) != 0)
+		return 0;
+
+	sublevel = atoi(uts.release + 4);
+	return sublevel >= 32;
+}
+
+static int op_init(struct libusb_context *ctx)
+{
+	struct stat statbuf;
+	int r;
+
+	usbfs_path = find_usbfs_path();
+	if (!usbfs_path) {
+		usbi_err(ctx, "could not find usbfs");
+		return LIBUSB_ERROR_OTHER;
+	}
+
+	if (monotonic_clkid == -1)
+		monotonic_clkid = find_monotonic_clock();
+
+	if (supports_flag_bulk_continuation == -1) {
+		supports_flag_bulk_continuation = check_flag_bulk_continuation();
+		if (supports_flag_bulk_continuation == -1) {
+			usbi_err(ctx, "error checking for bulk continuation support");
+			return LIBUSB_ERROR_OTHER;
+		}
+	}
+
+	if (supports_flag_bulk_continuation)
+		usbi_dbg("bulk continuation flag supported");
+
+	r = stat(SYSFS_DEVICE_PATH, &statbuf);
+	if (r == 0 && S_ISDIR(statbuf.st_mode)) {
+		usbi_dbg("found usb devices in sysfs");
+	} else {
+		usbi_dbg("sysfs usb info not available");
+		sysfs_has_descriptors = 0;
+		sysfs_can_relate_devices = 0;
+	}
+
+	return 0;
+}
+
+static int usbfs_get_device_descriptor(struct libusb_device *dev,
+	unsigned char *buffer)
+{
+	struct linux_device_priv *priv = __device_priv(dev);
+
+	/* return cached copy */
+	memcpy(buffer, priv->dev_descriptor, DEVICE_DESC_LENGTH);
+	return 0;
+}
+
+static int __open_sysfs_attr(struct libusb_device *dev, const char *attr)
+{
+	struct linux_device_priv *priv = __device_priv(dev);
+	char filename[PATH_MAX];
+	int fd;
+
+	snprintf(filename, PATH_MAX, "%s/%s/%s",
+		SYSFS_DEVICE_PATH, priv->sysfs_dir, attr);
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		usbi_err(DEVICE_CTX(dev),
+			"open %s failed ret=%d errno=%d", filename, fd, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	return fd;
+}
+
+static int sysfs_get_device_descriptor(struct libusb_device *dev,
+	unsigned char *buffer)
+{
+	int fd;
+	ssize_t r;
+
+	/* sysfs provides access to an in-memory copy of the device descriptor,
+	 * so we use that rather than keeping our own copy */
+
+	fd = __open_sysfs_attr(dev, "descriptors");
+	if (fd < 0)
+		return fd;
+
+	r = read(fd, buffer, DEVICE_DESC_LENGTH);;
+	close(fd);
+	if (r < 0) {
+		usbi_err(DEVICE_CTX(dev), "read failed, ret=%d errno=%d", fd, errno);
+		return LIBUSB_ERROR_IO;
+	} else if (r < DEVICE_DESC_LENGTH) {
+		usbi_err(DEVICE_CTX(dev), "short read %d/%d", r, DEVICE_DESC_LENGTH);
+		return LIBUSB_ERROR_IO;
+	}
+
+	return 0;
+}
+
+static int op_get_device_descriptor(struct libusb_device *dev,
+	unsigned char *buffer, int *host_endian)
+{
+	if (sysfs_has_descriptors) {
+		return sysfs_get_device_descriptor(dev, buffer);
+	} else {
+		*host_endian = 1;
+		return usbfs_get_device_descriptor(dev, buffer);
+	}
+}
+
+static int usbfs_get_active_config_descriptor(struct libusb_device *dev,
+	unsigned char *buffer, size_t len)
+{
+	struct linux_device_priv *priv = __device_priv(dev);
+	if (!priv->config_descriptor)
+		return LIBUSB_ERROR_NOT_FOUND; /* device is unconfigured */
+
+	/* retrieve cached copy */
+	memcpy(buffer, priv->config_descriptor, len);
+	return 0;
+}
+
+/* read the bConfigurationValue for a device */
+static int sysfs_get_active_config(struct libusb_device *dev, int *config)
+{
+	char *endptr;
+	char tmp[4] = {0, 0, 0, 0};
+	long num;
+	int fd;
+	size_t r;
+
+	fd = __open_sysfs_attr(dev, "bConfigurationValue");
+	if (fd < 0)
+		return fd;
+
+	r = read(fd, tmp, sizeof(tmp));
+	close(fd);
+	if (r < 0) {
+		usbi_err(DEVICE_CTX(dev), 
+			"read bConfigurationValue failed ret=%d errno=%d", r, errno);
+		return LIBUSB_ERROR_IO;
+	} else if (r == 0) {
+		usbi_err(DEVICE_CTX(dev), "device unconfigured");
+		*config = -1;
+		return 0;
+	}
+
+	if (tmp[sizeof(tmp) - 1] != 0) {
+		usbi_err(DEVICE_CTX(dev), "not null-terminated?");
+		return LIBUSB_ERROR_IO;
+	} else if (tmp[0] == 0) {
+		usbi_err(DEVICE_CTX(dev), "no configuration value?");
+		return LIBUSB_ERROR_IO;
+	}
+
+	num = strtol(tmp, &endptr, 10);
+	if (endptr == tmp) {
+		usbi_err(DEVICE_CTX(dev), "error converting '%s' to integer", tmp);
+		return LIBUSB_ERROR_IO;
+	}
+
+	*config = (int) num;
+	return 0;
+}
+
+/* takes a usbfs/descriptors fd seeked to the start of a configuration, and
+ * seeks to the next one. */
+static int seek_to_next_config(struct libusb_context *ctx, int fd,
+	int host_endian)
+{
+	struct libusb_config_descriptor config;
+	unsigned char tmp[6];
+	off_t off;
+	int r;
+
+	/* read first 6 bytes of descriptor */
+	r = read(fd, tmp, sizeof(tmp));
+	if (r < 0) {
+		usbi_err(ctx, "read failed ret=%d errno=%d", r, errno);
+		return LIBUSB_ERROR_IO;
+	} else if (r < sizeof(tmp)) {
+		usbi_err(ctx, "short descriptor read %d/%d", r, sizeof(tmp));
+		return LIBUSB_ERROR_IO;
+	}
+
+	/* seek forward to end of config */
+	usbi_parse_descriptor(tmp, "bbwbb", &config, host_endian);
+	off = lseek(fd, config.wTotalLength - sizeof(tmp), SEEK_CUR);
+	if (off < 0) {
+		usbi_err(ctx, "seek failed ret=%d errno=%d", off, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	return 0;
+}
+
+static int sysfs_get_active_config_descriptor(struct libusb_device *dev,
+	unsigned char *buffer, size_t len)
+{
+	int fd;
+	ssize_t r;
+	off_t off;
+	int to_copy;
+	int config;
+	unsigned char tmp[6];
+
+	r = sysfs_get_active_config(dev, &config);
+	if (r < 0)
+		return r;
+	if (config == -1)
+		return LIBUSB_ERROR_NOT_FOUND;
+
+	usbi_dbg("active configuration %d", config);
+
+	/* sysfs provides access to an in-memory copy of the device descriptor,
+	 * so we use that rather than keeping our own copy */
+
+	fd = __open_sysfs_attr(dev, "descriptors");
+	if (fd < 0)
+		return fd;
+
+	/* device might have been unconfigured since we read bConfigurationValue,
+	 * so first check that there is any config descriptor data at all... */
+	off = lseek(fd, 0, SEEK_END);
+	if (off < 1) {
+		usbi_err(DEVICE_CTX(dev), "end seek failed, ret=%d errno=%d",
+			off, errno);
+		close(fd);
+		return LIBUSB_ERROR_IO;
+	} else if (off == DEVICE_DESC_LENGTH) {
+		close(fd);
+		return LIBUSB_ERROR_NOT_FOUND;
+	}
+
+	off = lseek(fd, DEVICE_DESC_LENGTH, SEEK_SET);
+	if (off < 0) {
+		usbi_err(DEVICE_CTX(dev), "seek failed, ret=%d errno=%d", off, errno);
+		close(fd);
+		return LIBUSB_ERROR_IO;
+	}
+
+	/* unbounded loop: we expect the descriptor to be present under all
+	 * circumstances */
+	while (1) {
+		r = read(fd, tmp, sizeof(tmp));
+		if (r < 0) {
+			usbi_err(DEVICE_CTX(dev), "read failed, ret=%d errno=%d",
+				fd, errno);
+			return LIBUSB_ERROR_IO;
+		} else if (r < sizeof(tmp)) {
+			usbi_err(DEVICE_CTX(dev), "short read %d/%d", r, sizeof(tmp));
+			return LIBUSB_ERROR_IO;
+		}
+
+		/* check bConfigurationValue */
+		if (tmp[5] == config)
+			break;
+
+		/* try the next descriptor */
+		off = lseek(fd, 0 - sizeof(tmp), SEEK_CUR);
+		if (off < 0)
+			return LIBUSB_ERROR_IO;
+
+		r = seek_to_next_config(DEVICE_CTX(dev), fd, 0);
+		if (r < 0)
+			return r;
+	}
+
+	to_copy = (len < sizeof(tmp)) ? len : sizeof(tmp);
+	memcpy(buffer, tmp, to_copy);
+	if (len > sizeof(tmp)) {
+		r = read(fd, buffer + sizeof(tmp), len - sizeof(tmp));
+		if (r < 0) {
+			usbi_err(DEVICE_CTX(dev), "read failed, ret=%d errno=%d",
+				fd, errno);
+			r = LIBUSB_ERROR_IO;
+		} else if (r == 0) {
+			usbi_dbg("device is unconfigured");
+			r = LIBUSB_ERROR_NOT_FOUND;
+		} else if (r < len - sizeof(tmp)) {
+			usbi_err(DEVICE_CTX(dev), "short read %d/%d", r, len);
+			r = LIBUSB_ERROR_IO;
+		}
+	} else {
+		r = 0;
+	}
+
+	close(fd);
+	return r;
+}
+
+static int op_get_active_config_descriptor(struct libusb_device *dev,
+	unsigned char *buffer, size_t len, int *host_endian)
+{
+	if (sysfs_has_descriptors) {
+		return sysfs_get_active_config_descriptor(dev, buffer, len);
+	} else {
+		return usbfs_get_active_config_descriptor(dev, buffer, len);
+	}
+}
+
+/* takes a usbfs fd, attempts to find the requested config and copy a certain
+ * amount of it into an output buffer. */
+static int get_config_descriptor(struct libusb_context *ctx, int fd,
+	uint8_t config_index, unsigned char *buffer, size_t len)
+{
+	off_t off;
+	ssize_t r;
+
+	off = lseek(fd, DEVICE_DESC_LENGTH, SEEK_SET);
+	if (off < 0) {
+		usbi_err(ctx, "seek failed ret=%d errno=%d", off, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	/* might need to skip some configuration descriptors to reach the
+	 * requested configuration */
+	while (config_index > 0) {
+		r = seek_to_next_config(ctx, fd, 1);
+		if (r < 0)
+			return r;
+		config_index--;
+	}
+
+	/* read the rest of the descriptor */
+	r = read(fd, buffer, len);
+	if (r < 0) {
+		usbi_err(ctx, "read failed ret=%d errno=%d", r, errno);
+		return LIBUSB_ERROR_IO;
+	} else if (r < len) {
+		usbi_err(ctx, "short output read %d/%d", r, len);
+		return LIBUSB_ERROR_IO;
+	}
+
+	return 0;
+}
+
+static int op_get_config_descriptor(struct libusb_device *dev,
+	uint8_t config_index, unsigned char *buffer, size_t len, int *host_endian)
+{
+	char filename[PATH_MAX];
+	int fd;
+	int r;
+
+	/* always read from usbfs: sysfs only has the active descriptor
+	 * this will involve waking the device up, but oh well! */
+
+	/* FIXME: the above is no longer true, new kernels have all descriptors
+	 * in the descriptors file. but its kinda hard to detect if the kernel
+	 * is sufficiently new. */
+
+	__get_usbfs_path(dev, filename);
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		usbi_err(DEVICE_CTX(dev),
+			"open '%s' failed, ret=%d errno=%d", filename, fd, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	r = get_config_descriptor(DEVICE_CTX(dev), fd, config_index, buffer, len);
+	close(fd);
+	return r;
+}
+
+/* cache the active config descriptor in memory. a value of -1 means that
+ * we aren't sure which one is active, so just assume the first one. 
+ * only for usbfs. */
+static int cache_active_config(struct libusb_device *dev, int fd,
+	int active_config)
+{
+	struct linux_device_priv *priv = __device_priv(dev);
+	struct libusb_config_descriptor config;
+	unsigned char tmp[8];
+	unsigned char *buf;
+	int idx;
+	int r;
+
+	if (active_config == -1) {
+		idx = 0;
+	} else {
+		r = usbi_get_config_index_by_value(dev, active_config, &idx);
+		if (r < 0)
+			return r;
+		if (idx == -1)
+			return LIBUSB_ERROR_NOT_FOUND;
+	}
+
+	r = get_config_descriptor(DEVICE_CTX(dev), fd, idx, tmp, sizeof(tmp));
+	if (r < 0) {
+		usbi_err(DEVICE_CTX(dev), "first read error %d", r);
+		return r;
+	}
+
+	usbi_parse_descriptor(tmp, "bbw", &config, 0);
+	buf = malloc(config.wTotalLength);
+	if (!buf)
+		return LIBUSB_ERROR_NO_MEM;
+
+	r = get_config_descriptor(DEVICE_CTX(dev), fd, idx, buf,
+		config.wTotalLength);
+	if (r < 0) {
+		free(buf);
+		return r;
+	}
+
+	if (priv->config_descriptor)
+		free(priv->config_descriptor);
+	priv->config_descriptor = buf;
+	return 0;
+}
+
+/* send a control message to retrieve active configuration */
+static int usbfs_get_active_config(struct libusb_device *dev, int fd)
+{
+	unsigned char active_config = 0;
+	int r;
+
+	struct usbfs_ctrltransfer ctrl = {
+		.bmRequestType = LIBUSB_ENDPOINT_IN,
+		.bRequest = LIBUSB_REQUEST_GET_CONFIGURATION,
+		.wValue = 0,
+		.wIndex = 0,
+		.wLength = 1,
+		.timeout = 1000,
+		.data = &active_config
+	};
+
+	r = ioctl(fd, IOCTL_USBFS_CONTROL, &ctrl);
+	if (r < 0) {
+		if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		/* we hit this error path frequently with buggy devices :( */
+		usbi_warn(DEVICE_CTX(dev),
+			"get_configuration failed ret=%d errno=%d", r, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	return active_config;
+}
+
+static int initialize_device(struct libusb_device *dev, uint8_t busnum,
+	uint8_t devaddr, const char *sysfs_dir)
+{
+	struct linux_device_priv *priv = __device_priv(dev);
+	unsigned char *dev_buf;
+	char path[PATH_MAX];
+	int fd;
+	int active_config = 0;
+	int device_configured = 1;
+	ssize_t r;
+
+	dev->bus_number = busnum;
+	dev->device_address = devaddr;
+
+	if (sysfs_dir) {
+		priv->sysfs_dir = malloc(strlen(sysfs_dir) + 1);
+		if (!priv->sysfs_dir)
+			return LIBUSB_ERROR_NO_MEM;
+		strcpy(priv->sysfs_dir, sysfs_dir);
+	}
+
+	if (sysfs_has_descriptors)
+		return 0;
+
+	/* cache device descriptor in memory so that we can retrieve it later
+	 * without waking the device up (op_get_device_descriptor) */
+
+	priv->dev_descriptor = NULL;
+	priv->config_descriptor = NULL;
+
+	if (sysfs_can_relate_devices) {
+		int tmp = sysfs_get_active_config(dev, &active_config);
+		if (tmp < 0)
+			return tmp;
+		if (active_config == -1)
+			device_configured = 0;
+	}
+
+	__get_usbfs_path(dev, path);
+	fd = open(path, O_RDWR);
+	if (fd < 0 && errno == EACCES) {
+		fd = open(path, O_RDONLY);
+		/* if we only have read-only access to the device, we cannot
+		 * send a control message to determine the active config. just
+		 * assume the first one is active. */
+		active_config = -1;
+	}
+
+	if (fd < 0) {
+		usbi_err(DEVICE_CTX(dev), "open failed, ret=%d errno=%d", fd, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	if (!sysfs_can_relate_devices) {
+		if (active_config == -1) {
+			/* if we only have read-only access to the device, we cannot
+			 * send a control message to determine the active config. just
+			 * assume the first one is active. */
+			usbi_warn(DEVICE_CTX(dev), "access to %s is read-only; cannot "
+				"determine active configuration descriptor", path);
+		} else {
+			active_config = usbfs_get_active_config(dev, fd);
+			if (active_config == LIBUSB_ERROR_IO) {
+				/* buggy devices sometimes fail to report their active config.
+				 * assume unconfigured and continue the probing */
+				usbi_warn(DEVICE_CTX(dev), "couldn't query active "
+					"configuration, assumung unconfigured");
+				device_configured = 0;
+			} else if (active_config < 0) {
+				close(fd);
+				return active_config;
+			} else if (active_config == 0) {
+				/* some buggy devices have a configuration 0, but we're
+				 * reaching into the corner of a corner case here, so let's
+				 * not support buggy devices in these circumstances.
+				 * stick to the specs: a configuration value of 0 means
+				 * unconfigured. */
+				usbi_dbg("active cfg 0? assuming unconfigured device");
+				device_configured = 0;
+			}
+		}
+	}
+
+	dev_buf = malloc(DEVICE_DESC_LENGTH);
+	if (!dev_buf) {
+		close(fd);
+		return LIBUSB_ERROR_NO_MEM;
+	}
+
+	r = read(fd, dev_buf, DEVICE_DESC_LENGTH);
+	if (r < 0) {
+		usbi_err(DEVICE_CTX(dev),
+			"read descriptor failed ret=%d errno=%d", fd, errno);
+		free(dev_buf);
+		close(fd);
+		return LIBUSB_ERROR_IO;
+	} else if (r < DEVICE_DESC_LENGTH) {
+		usbi_err(DEVICE_CTX(dev), "short descriptor read (%d)", r);
+		free(dev_buf);
+		close(fd);
+		return LIBUSB_ERROR_IO;
+	}
+
+	/* bit of a hack: set num_configurations now because cache_active_config()
+	 * calls usbi_get_config_index_by_value() which uses it */
+	dev->num_configurations = dev_buf[DEVICE_DESC_LENGTH - 1];
+
+	if (device_configured) {
+		r = cache_active_config(dev, fd, active_config);
+		if (r < 0) {
+			close(fd);
+			free(dev_buf);
+			return r;
+		}
+	}
+
+	close(fd);
+	priv->dev_descriptor = dev_buf;
+	return 0;
+}
+
+static int enumerate_device(struct libusb_context *ctx,
+	struct discovered_devs **_discdevs, uint8_t busnum, uint8_t devaddr,
+	const char *sysfs_dir)
+{
+	struct discovered_devs *discdevs;
+	unsigned long session_id;
+	int need_unref = 0;
+	struct libusb_device *dev;
+	int r = 0;
+
+	/* FIXME: session ID is not guaranteed unique as addresses can wrap and
+	 * will be reused. instead we should add a simple sysfs attribute with
+	 * a session ID. */
+	session_id = busnum << 8 | devaddr;
+	usbi_dbg("busnum %d devaddr %d session_id %ld", busnum, devaddr,
+		session_id);
+
+	dev = usbi_get_device_by_session_id(ctx, session_id);
+	if (dev) {
+		usbi_dbg("using existing device for %d/%d (session %ld)",
+			busnum, devaddr, session_id);
+	} else {
+		usbi_dbg("allocating new device for %d/%d (session %ld)",
+			busnum, devaddr, session_id);
+		dev = usbi_alloc_device(ctx, session_id);
+		if (!dev)
+			return LIBUSB_ERROR_NO_MEM;
+		need_unref = 1;
+		r = initialize_device(dev, busnum, devaddr, sysfs_dir);
+		if (r < 0)
+			goto out;
+		r = usbi_sanitize_device(dev);
+		if (r < 0)
+			goto out;
+	}
+
+	discdevs = discovered_devs_append(*_discdevs, dev);
+	if (!discdevs)
+		r = LIBUSB_ERROR_NO_MEM;
+	else
+		*_discdevs = discdevs;
+
+out:
+	if (need_unref)
+		libusb_unref_device(dev);
+	return r;
+}
+
+/* open a bus directory and adds all discovered devices to discdevs. on
+ * failure (non-zero return) the pre-existing discdevs should be destroyed
+ * (and devices freed). on success, the new discdevs pointer should be used
+ * as it may have been moved. */
+static int usbfs_scan_busdir(struct libusb_context *ctx,
+	struct discovered_devs **_discdevs, uint8_t busnum)
+{
+	DIR *dir;
+	char dirpath[PATH_MAX];
+	struct dirent *entry;
+	struct discovered_devs *discdevs = *_discdevs;
+	int r = 0;
+
+	snprintf(dirpath, PATH_MAX, "%s/%03d", usbfs_path, busnum);
+	usbi_dbg("%s", dirpath);
+	dir = opendir(dirpath);
+	if (!dir) {
+		usbi_err(ctx, "opendir '%s' failed, errno=%d", dirpath, errno);
+		/* FIXME: should handle valid race conditions like hub unplugged
+		 * during directory iteration - this is not an error */
+		return LIBUSB_ERROR_IO;
+	}
+
+	while ((entry = readdir(dir))) {
+		int devaddr;
+
+		if (entry->d_name[0] == '.')
+			continue;
+
+		devaddr = atoi(entry->d_name);
+		if (devaddr == 0) {
+			usbi_dbg("unknown dir entry %s", entry->d_name);
+			continue;
+		}
+
+		r = enumerate_device(ctx, &discdevs, busnum, (uint8_t) devaddr, NULL);
+		if (r < 0)
+			goto out;
+	}
+
+	*_discdevs = discdevs;
+out:
+	closedir(dir);
+	return r;
+}
+
+static int usbfs_get_device_list(struct libusb_context *ctx,
+	struct discovered_devs **_discdevs)
+{
+	struct dirent *entry;
+	DIR *buses = opendir(usbfs_path);
+	struct discovered_devs *discdevs = *_discdevs;
+	int r = 0;
+
+	if (!buses) {
+		usbi_err(ctx, "opendir buses failed errno=%d", errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	while ((entry = readdir(buses))) {
+		struct discovered_devs *discdevs_new = discdevs;
+		int busnum;
+
+		if (entry->d_name[0] == '.')
+			continue;
+
+		busnum = atoi(entry->d_name);
+		if (busnum == 0) {
+			usbi_dbg("unknown dir entry %s", entry->d_name);
+			continue;
+		}
+
+		r = usbfs_scan_busdir(ctx, &discdevs_new, busnum);
+		if (r < 0)
+			goto out;
+		discdevs = discdevs_new;
+	}
+
+out:
+	closedir(buses);
+	*_discdevs = discdevs;
+	return r;
+
+}
+
+static int sysfs_scan_device(struct libusb_context *ctx,
+	struct discovered_devs **_discdevs, const char *devname,
+	int *usbfs_fallback)
+{
+	int r;
+	FILE *fd;
+	char filename[PATH_MAX];
+	int busnum;
+	int devaddr;
+
+	usbi_dbg("scan %s", devname);
+
+	/* determine descriptors presence ahead of time, we need to know this
+	 * when we reach initialize_device */
+	if (sysfs_has_descriptors == -1) {
+		struct stat statbuf;
+
+		snprintf(filename, PATH_MAX, "%s/%s/descriptors", SYSFS_DEVICE_PATH,
+			devname);
+		r = stat(filename, &statbuf);
+		if (r == 0 && S_ISREG(statbuf.st_mode)) {
+			usbi_dbg("sysfs descriptors available");
+			sysfs_has_descriptors = 1;
+		} else {
+			usbi_dbg("sysfs descriptors not available");
+			sysfs_has_descriptors = 0;
+		}
+	}
+
+	snprintf(filename, PATH_MAX, "%s/%s/busnum", SYSFS_DEVICE_PATH, devname);
+	fd = fopen(filename, "r");
+	if (!fd) {
+		if (errno == ENOENT) {
+			usbi_dbg("busnum not found, cannot relate sysfs to usbfs, "
+				"falling back on pure usbfs");
+			sysfs_can_relate_devices = 0;
+			*usbfs_fallback = 1;
+			return LIBUSB_ERROR_OTHER;
+		}
+		usbi_err(ctx, "open busnum failed, errno=%d", errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	sysfs_can_relate_devices = 1;
+
+	r = fscanf(fd, "%d", &busnum);
+	fclose(fd);
+	if (r != 1) {
+		usbi_err(ctx, "fscanf busnum returned %d, errno=%d", r, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	snprintf(filename, PATH_MAX, "%s/%s/devnum", SYSFS_DEVICE_PATH, devname);
+	fd = fopen(filename, "r");
+	if (!fd) {
+		usbi_err(ctx, "open devnum failed, errno=%d", errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	r = fscanf(fd, "%d", &devaddr);
+	fclose(fd);
+	if (r != 1) {
+		usbi_err(ctx, "fscanf devnum returned %d, errno=%d", r, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	usbi_dbg("bus=%d dev=%d", busnum, devaddr);
+	if (busnum > 255 || devaddr > 255)
+		return LIBUSB_ERROR_INVALID_PARAM;
+
+	return enumerate_device(ctx, _discdevs, busnum & 0xff, devaddr & 0xff,
+		devname);
+}
+
+static int sysfs_get_device_list(struct libusb_context *ctx,
+	struct discovered_devs **_discdevs, int *usbfs_fallback)
+{
+	struct discovered_devs *discdevs = *_discdevs;
+	DIR *devices = opendir(SYSFS_DEVICE_PATH);
+	struct dirent *entry;
+	int r = 0;
+
+	if (!devices) {
+		usbi_err(ctx, "opendir devices failed errno=%d", errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	while ((entry = readdir(devices))) {
+		struct discovered_devs *discdevs_new = discdevs;
+
+		if ((!isdigit(entry->d_name[0]) && strncmp(entry->d_name, "usb", 3))
+				|| strchr(entry->d_name, ':'))
+			continue;
+
+		r = sysfs_scan_device(ctx, &discdevs_new, entry->d_name,
+			usbfs_fallback);
+		if (r < 0)
+			goto out;
+		discdevs = discdevs_new;
+	}	
+
+out:
+	closedir(devices);
+	*_discdevs = discdevs;
+	return r;
+}
+
+static int op_get_device_list(struct libusb_context *ctx,
+	struct discovered_devs **_discdevs)
+{
+	/* we can retrieve device list and descriptors from sysfs or usbfs.
+	 * sysfs is preferable, because if we use usbfs we end up resuming
+	 * any autosuspended USB devices. however, sysfs is not available
+	 * everywhere, so we need a usbfs fallback too.
+	 *
+	 * as described in the "sysfs vs usbfs" comment, sometimes we have
+	 * sysfs but not enough information to relate sysfs devices to usbfs
+	 * nodes. the usbfs_fallback variable is used to indicate that we should
+	 * fall back on usbfs.
+	 */
+	if (sysfs_can_relate_devices != 0) {
+		int usbfs_fallback = 0;
+		int r = sysfs_get_device_list(ctx, _discdevs, &usbfs_fallback);
+		if (!usbfs_fallback)
+			return r;
+	}
+
+	return usbfs_get_device_list(ctx, _discdevs);
+}
+
+static int op_open(struct libusb_device_handle *handle)
+{
+	struct linux_device_handle_priv *hpriv = __device_handle_priv(handle);
+	char filename[PATH_MAX];
+
+	__get_usbfs_path(handle->dev, filename);
+	hpriv->fd = open(filename, O_RDWR);
+	if (hpriv->fd < 0) {
+		if (errno == EACCES) {
+			usbi_err(HANDLE_CTX(handle), "libusb couldn't open USB device %s: "
+				"Permission denied.", filename);
+			usbi_err(HANDLE_CTX(handle),
+				"libusb requires write access to USB device nodes.");
+			return LIBUSB_ERROR_ACCESS;
+		} else if (errno == ENOENT) {
+			return LIBUSB_ERROR_NO_DEVICE;
+		} else {
+			usbi_err(HANDLE_CTX(handle),
+				"open failed, code %d errno %d", hpriv->fd, errno);
+			return LIBUSB_ERROR_IO;
+		}
+	}
+
+	return usbi_add_pollfd(HANDLE_CTX(handle), hpriv->fd, POLLOUT);
+}
+
+static void op_close(struct libusb_device_handle *dev_handle)
+{
+	int fd = __device_handle_priv(dev_handle)->fd;
+	usbi_remove_pollfd(HANDLE_CTX(dev_handle), fd);
+	close(fd);
+}
+
+static int op_get_configuration(struct libusb_device_handle *handle,
+	int *config)
+{
+	int r;
+	if (sysfs_can_relate_devices != 1)
+		return LIBUSB_ERROR_NOT_SUPPORTED;
+
+	r = sysfs_get_active_config(handle->dev, config);
+	if (*config == -1)
+		*config = 0;
+
+	return 0;
+}
+
+static int op_set_configuration(struct libusb_device_handle *handle, int config)
+{
+	struct linux_device_priv *priv = __device_priv(handle->dev);
+	int fd = __device_handle_priv(handle)->fd;
+	int r = ioctl(fd, IOCTL_USBFS_SETCONFIG, &config);
+	if (r) {
+		if (errno == EINVAL)
+			return LIBUSB_ERROR_NOT_FOUND;
+		else if (errno == EBUSY)
+			return LIBUSB_ERROR_BUSY;
+		else if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle), "failed, error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+
+	if (!sysfs_has_descriptors) {
+		/* update our cached active config descriptor */
+		if (config == -1) {
+			if (priv->config_descriptor) {
+				free(priv->config_descriptor);
+				priv->config_descriptor = NULL;
+			}
+		} else {
+			r = cache_active_config(handle->dev, fd, config);
+			if (r < 0)
+				usbi_warn(HANDLE_CTX(handle),
+					"failed to update cached config descriptor, error %d", r);
+		}
+	}
+
+	return 0;
+}
+
+static int op_claim_interface(struct libusb_device_handle *handle, int iface)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	int r = ioctl(fd, IOCTL_USBFS_CLAIMINTF, &iface);
+	if (r) {
+		if (errno == ENOENT)
+			return LIBUSB_ERROR_NOT_FOUND;
+		else if (errno == EBUSY)
+			return LIBUSB_ERROR_BUSY;
+		else if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle),
+			"claim interface failed, error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+	return 0;
+}
+
+static int op_release_interface(struct libusb_device_handle *handle, int iface)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	int r = ioctl(fd, IOCTL_USBFS_RELEASEINTF, &iface);
+	if (r) {
+		if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle),
+			"release interface failed, error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+	return 0;
+}
+
+static int op_set_interface(struct libusb_device_handle *handle, int iface,
+	int altsetting)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	struct usbfs_setinterface setintf;
+	int r;
+
+	setintf.interface = iface;
+	setintf.altsetting = altsetting;
+	r = ioctl(fd, IOCTL_USBFS_SETINTF, &setintf);
+	if (r) {
+		if (errno == EINVAL)
+			return LIBUSB_ERROR_NOT_FOUND;
+		else if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle),
+			"setintf failed error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+
+	return 0;
+}
+
+static int op_clear_halt(struct libusb_device_handle *handle,
+	unsigned char endpoint)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	unsigned int _endpoint = endpoint;
+	int r = ioctl(fd, IOCTL_USBFS_CLEAR_HALT, &_endpoint);
+	if (r) {
+		if (errno == ENOENT)
+			return LIBUSB_ERROR_NOT_FOUND;
+		else if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle),
+			"clear_halt failed error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+
+	return 0;
+}
+
+static int op_reset_device(struct libusb_device_handle *handle)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	int r = ioctl(fd, IOCTL_USBFS_RESET, NULL);
+	if (r) {
+		if (errno == ENODEV)
+			return LIBUSB_ERROR_NOT_FOUND;
+
+		usbi_err(HANDLE_CTX(handle),
+			"reset failed error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+
+	return 0;
+}
+
+static int op_kernel_driver_active(struct libusb_device_handle *handle,
+	int interface)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	struct usbfs_getdriver getdrv;
+	int r;
+
+	getdrv.interface = interface;
+	r = ioctl(fd, IOCTL_USBFS_GETDRIVER, &getdrv);
+	if (r) {
+		if (errno == ENODATA)
+			return 0;
+		else if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle),
+			"get driver failed error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+
+	return 1;
+}
+
+static int op_detach_kernel_driver(struct libusb_device_handle *handle,
+	int interface)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	struct usbfs_ioctl command;
+	int r;
+
+	command.ifno = interface;
+	command.ioctl_code = IOCTL_USBFS_DISCONNECT;
+	command.data = NULL;
+
+	r = ioctl(fd, IOCTL_USBFS_IOCTL, &command);
+	if (r) {
+		if (errno == ENODATA)
+			return LIBUSB_ERROR_NOT_FOUND;
+		else if (errno == EINVAL)
+			return LIBUSB_ERROR_INVALID_PARAM;
+		else if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle),
+			"detach failed error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	}
+
+	return 0;
+}
+
+static int op_attach_kernel_driver(struct libusb_device_handle *handle,
+	int interface)
+{
+	int fd = __device_handle_priv(handle)->fd;
+	struct usbfs_ioctl command;
+	int r;
+
+	command.ifno = interface;
+	command.ioctl_code = IOCTL_USBFS_CONNECT;
+	command.data = NULL;
+
+	r = ioctl(fd, IOCTL_USBFS_IOCTL, &command);
+	if (r < 0) {
+		if (errno == ENODATA)
+			return LIBUSB_ERROR_NOT_FOUND;
+		else if (errno == EINVAL)
+			return LIBUSB_ERROR_INVALID_PARAM;
+		else if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+		else if (errno == EBUSY)
+			return LIBUSB_ERROR_BUSY;
+
+		usbi_err(HANDLE_CTX(handle),
+			"attach failed error %d errno %d", r, errno);
+		return LIBUSB_ERROR_OTHER;
+	} else if (r == 0) {
+		return LIBUSB_ERROR_NOT_FOUND;
+	}
+
+	return 0;
+}
+
+static void op_destroy_device(struct libusb_device *dev)
+{
+	struct linux_device_priv *priv = __device_priv(dev);
+	if (!sysfs_has_descriptors) {
+		if (priv->dev_descriptor)
+			free(priv->dev_descriptor);
+		if (priv->config_descriptor)
+			free(priv->config_descriptor);
+	}
+	if (priv->sysfs_dir)
+		free(priv->sysfs_dir);
+}
+
+static void free_iso_urbs(struct linux_transfer_priv *tpriv)
+{
+	int i;
+	for (i = 0; i < tpriv->num_urbs; i++) {
+		struct usbfs_urb *urb = tpriv->iso_urbs[i];
+		if (!urb)
+			break;
+		free(urb);
+	}
+
+	free(tpriv->iso_urbs);
+	tpriv->iso_urbs = NULL;
+}
+
+static int submit_bulk_transfer(struct usbi_transfer *itransfer,
+	unsigned char urb_type)
+{
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	struct linux_device_handle_priv *dpriv =
+		__device_handle_priv(transfer->dev_handle);
+	struct usbfs_urb *urbs;
+	int is_out = (transfer->endpoint & LIBUSB_ENDPOINT_DIR_MASK)
+		== LIBUSB_ENDPOINT_OUT;
+	int r;
+	int i;
+	size_t alloc_size;
+
+	if (tpriv->urbs)
+		return LIBUSB_ERROR_BUSY;
+
+	/* usbfs places a 16kb limit on bulk URBs. we divide up larger requests
+	 * into smaller units to meet such restriction, then fire off all the
+	 * units at once. it would be simpler if we just fired one unit at a time,
+	 * but there is a big performance gain through doing it this way. */
+	int num_urbs = transfer->length / MAX_BULK_BUFFER_LENGTH;
+	int last_urb_partial = 0;
+
+	if (transfer->length == 0) {
+		num_urbs = 1;
+	} else if ((transfer->length % MAX_BULK_BUFFER_LENGTH) > 0) {
+		last_urb_partial = 1;
+		num_urbs++;
+	}
+	usbi_dbg("need %d urbs for new transfer with length %d", num_urbs,
+		transfer->length);
+	alloc_size = num_urbs * sizeof(struct usbfs_urb);
+	urbs = malloc(alloc_size);
+	if (!urbs)
+		return LIBUSB_ERROR_NO_MEM;
+	memset(urbs, 0, alloc_size);
+	tpriv->urbs = urbs;
+	tpriv->num_urbs = num_urbs;
+	tpriv->num_retired = 0;
+	tpriv->reap_action = NORMAL;
+	tpriv->reap_status = LIBUSB_TRANSFER_COMPLETED;
+
+	for (i = 0; i < num_urbs; i++) {
+		struct usbfs_urb *urb = &urbs[i];
+		urb->usercontext = itransfer;
+		urb->type = urb_type;
+		urb->endpoint = transfer->endpoint;
+		urb->buffer = transfer->buffer + (i * MAX_BULK_BUFFER_LENGTH);
+		if (supports_flag_bulk_continuation && !is_out)
+			urb->flags = USBFS_URB_SHORT_NOT_OK;
+		if (i == num_urbs - 1 && last_urb_partial)
+			urb->buffer_length = transfer->length % MAX_BULK_BUFFER_LENGTH;
+		else if (transfer->length == 0)
+			urb->buffer_length = 0;
+		else
+			urb->buffer_length = MAX_BULK_BUFFER_LENGTH;
+
+		if (i > 0 && supports_flag_bulk_continuation)
+			urb->flags |= USBFS_URB_BULK_CONTINUATION;
+
+		r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urb);
+		if (r < 0) {
+			int j;
+
+			if (errno == ENODEV) {
+				r = LIBUSB_ERROR_NO_DEVICE;
+			} else {
+				usbi_err(TRANSFER_CTX(transfer),
+					"submiturb failed error %d errno=%d", r, errno);
+				r = LIBUSB_ERROR_IO;
+			}
+	
+			/* if the first URB submission fails, we can simply free up and
+			 * return failure immediately. */
+			if (i == 0) {
+				usbi_dbg("first URB failed, easy peasy");
+				free(urbs);
+				tpriv->urbs = NULL;
+				return r;
+			}
+
+			/* if it's not the first URB that failed, the situation is a bit
+			 * tricky. we may need to discard all previous URBs. there are
+			 * complications:
+			 *  - discarding is asynchronous - discarded urbs will be reaped
+			 *    later. the user must not have freed the transfer when the
+			 *    discarded URBs are reaped, otherwise libusb will be using
+			 *    freed memory.
+			 *  - the earlier URBs may have completed successfully and we do
+			 *    not want to throw away any data.
+			 *  - this URB failing may be no error; EREMOTEIO means that
+			 *    this transfer simply didn't need all the URBs we submitted
+			 * so, we report that the transfer was submitted successfully and
+			 * in case of error we discard all previous URBs. later when
+			 * the final reap completes we can report error to the user,
+			 * or success if an earlier URB was completed successfully.
+			 */
+			tpriv->reap_action = EREMOTEIO == errno ? COMPLETED_EARLY : SUBMIT_FAILED;
+
+			/* The URBs we haven't submitted yet we count as already
+			 * retired. */
+			tpriv->num_retired += num_urbs - i;
+
+			/* If we completed short then don't try to discard. */
+			if (COMPLETED_EARLY == tpriv->reap_action)
+				return 0;
+
+			for (j = 0; j < i; j++) {
+				int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, &urbs[j]);
+				if (tmp && errno != EINVAL)
+					usbi_warn(TRANSFER_CTX(transfer),
+						"unrecognised discard errno %d", errno);
+			}
+
+			usbi_dbg("reporting successful submission but waiting for %d "
+				"discards before reporting error", i);
+			return 0;
+		}
+	}
+
+	return 0;
+}
+
+static int submit_iso_transfer(struct usbi_transfer *itransfer)
+{
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	struct linux_device_handle_priv *dpriv =
+		__device_handle_priv(transfer->dev_handle);
+	struct usbfs_urb **urbs;
+	size_t alloc_size;
+	int num_packets = transfer->num_iso_packets;
+	int i;
+	int this_urb_len = 0;
+	int num_urbs = 1;
+	int packet_offset = 0;
+	unsigned int packet_len;
+	unsigned char *urb_buffer = transfer->buffer;
+
+	if (tpriv->iso_urbs)
+		return LIBUSB_ERROR_BUSY;
+
+	/* usbfs places a 32kb limit on iso URBs. we divide up larger requests
+	 * into smaller units to meet such restriction, then fire off all the
+	 * units at once. it would be simpler if we just fired one unit at a time,
+	 * but there is a big performance gain through doing it this way. */
+
+	/* calculate how many URBs we need */
+	for (i = 0; i < num_packets; i++) {
+		int space_remaining = MAX_ISO_BUFFER_LENGTH - this_urb_len;
+		packet_len = transfer->iso_packet_desc[i].length;
+
+		if (packet_len > space_remaining) {
+			num_urbs++;
+			this_urb_len = packet_len;
+		} else {
+			this_urb_len += packet_len;
+		}
+	}
+	usbi_dbg("need %d 32k URBs for transfer", num_urbs);
+
+	alloc_size = num_urbs * sizeof(*urbs);
+	urbs = malloc(alloc_size);
+	if (!urbs)
+		return LIBUSB_ERROR_NO_MEM;
+	memset(urbs, 0, alloc_size);
+
+	tpriv->iso_urbs = urbs;
+	tpriv->num_urbs = num_urbs;
+	tpriv->num_retired = 0;
+	tpriv->reap_action = NORMAL;
+	tpriv->iso_packet_offset = 0;
+
+	/* allocate + initialize each URB with the correct number of packets */
+	for (i = 0; i < num_urbs; i++) {
+		struct usbfs_urb *urb;
+		int space_remaining_in_urb = MAX_ISO_BUFFER_LENGTH;
+		int urb_packet_offset = 0;
+		unsigned char *urb_buffer_orig = urb_buffer;
+		int j;
+		int k;
+
+		/* swallow up all the packets we can fit into this URB */
+		while (packet_offset < transfer->num_iso_packets) {
+			packet_len = transfer->iso_packet_desc[packet_offset].length;
+			if (packet_len <= space_remaining_in_urb) {
+				/* throw it in */
+				urb_packet_offset++;
+				packet_offset++;
+				space_remaining_in_urb -= packet_len;
+				urb_buffer += packet_len;
+			} else {
+				/* it can't fit, save it for the next URB */
+				break;
+			}
+		}
+
+		alloc_size = sizeof(*urb)
+			+ (urb_packet_offset * sizeof(struct usbfs_iso_packet_desc));
+		urb = malloc(alloc_size);
+		if (!urb) {
+			free_iso_urbs(tpriv);
+			return LIBUSB_ERROR_NO_MEM;
+		}
+		memset(urb, 0, alloc_size);
+		urbs[i] = urb;
+
+		/* populate packet lengths */
+		for (j = 0, k = packet_offset - urb_packet_offset;
+				k < packet_offset; k++, j++) {
+			packet_len = transfer->iso_packet_desc[k].length;
+			urb->iso_frame_desc[j].length = packet_len;
+		}
+
+		urb->usercontext = itransfer;
+		urb->type = USBFS_URB_TYPE_ISO;
+		/* FIXME: interface for non-ASAP data? */
+		urb->flags = USBFS_URB_ISO_ASAP;
+		urb->endpoint = transfer->endpoint;
+		urb->number_of_packets = urb_packet_offset;
+		urb->buffer = urb_buffer_orig;
+	}
+
+	/* submit URBs */
+	for (i = 0; i < num_urbs; i++) {
+		int r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urbs[i]);
+		if (r < 0) {
+			int j;
+
+			if (errno == ENODEV) {
+				r = LIBUSB_ERROR_NO_DEVICE;
+			} else {
+				usbi_err(TRANSFER_CTX(transfer),
+					"submiturb failed error %d errno=%d", r, errno);
+				r = LIBUSB_ERROR_IO;
+			}
+
+			/* if the first URB submission fails, we can simply free up and
+			 * return failure immediately. */
+			if (i == 0) {
+				usbi_dbg("first URB failed, easy peasy");
+				free_iso_urbs(tpriv);
+				return r;
+			}
+
+			/* if it's not the first URB that failed, the situation is a bit
+			 * tricky. we must discard all previous URBs. there are
+			 * complications:
+			 *  - discarding is asynchronous - discarded urbs will be reaped
+			 *    later. the user must not have freed the transfer when the
+			 *    discarded URBs are reaped, otherwise libusb will be using
+			 *    freed memory.
+			 *  - the earlier URBs may have completed successfully and we do
+			 *    not want to throw away any data.
+			 * so, in this case we discard all the previous URBs BUT we report
+			 * that the transfer was submitted successfully. then later when
+			 * the final discard completes we can report error to the user.
+			 */
+			tpriv->reap_action = SUBMIT_FAILED;
+
+			/* The URBs we haven't submitted yet we count as already
+			 * retired. */
+			tpriv->num_retired = num_urbs - i;
+			for (j = 0; j < i; j++) {
+				int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, urbs[j]);
+				if (tmp && errno != EINVAL)
+					usbi_warn(TRANSFER_CTX(transfer),
+						"unrecognised discard errno %d", errno);
+			}
+
+			usbi_dbg("reporting successful submission but waiting for %d "
+				"discards before reporting error", i);
+			return 0;
+		}
+	}
+
+	return 0;
+}
+
+static int submit_control_transfer(struct usbi_transfer *itransfer)
+{
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_device_handle_priv *dpriv =
+		__device_handle_priv(transfer->dev_handle);
+	struct usbfs_urb *urb;
+	int r;
+
+	if (tpriv->urbs)
+		return LIBUSB_ERROR_BUSY;
+
+	if (transfer->length - LIBUSB_CONTROL_SETUP_SIZE > MAX_CTRL_BUFFER_LENGTH)
+		return LIBUSB_ERROR_INVALID_PARAM;
+
+	urb = malloc(sizeof(struct usbfs_urb));
+	if (!urb)
+		return LIBUSB_ERROR_NO_MEM;
+	memset(urb, 0, sizeof(struct usbfs_urb));
+	tpriv->urbs = urb;
+	tpriv->reap_action = NORMAL;
+
+	urb->usercontext = itransfer;
+	urb->type = USBFS_URB_TYPE_CONTROL;
+	urb->endpoint = transfer->endpoint;
+	urb->buffer = transfer->buffer;
+	urb->buffer_length = transfer->length;
+
+	r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urb);
+	if (r < 0) {
+		free(urb);
+		tpriv->urbs = NULL;
+		if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(TRANSFER_CTX(transfer),
+			"submiturb failed error %d errno=%d", r, errno);
+		return LIBUSB_ERROR_IO;
+	}
+	return 0;
+}
+
+static int op_submit_transfer(struct usbi_transfer *itransfer)
+{
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+	switch (transfer->type) {
+	case LIBUSB_TRANSFER_TYPE_CONTROL:
+		return submit_control_transfer(itransfer);
+	case LIBUSB_TRANSFER_TYPE_BULK:
+		return submit_bulk_transfer(itransfer, USBFS_URB_TYPE_BULK);
+	case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+		return submit_bulk_transfer(itransfer, USBFS_URB_TYPE_INTERRUPT);
+	case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+		return submit_iso_transfer(itransfer);
+	default:
+		usbi_err(TRANSFER_CTX(transfer),
+			"unknown endpoint type %d", transfer->type);
+		return LIBUSB_ERROR_INVALID_PARAM;
+	}
+}
+
+static int cancel_control_transfer(struct usbi_transfer *itransfer)
+{
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_device_handle_priv *dpriv =
+		__device_handle_priv(transfer->dev_handle);
+	int r;
+
+	if (!tpriv->urbs)
+		return LIBUSB_ERROR_NOT_FOUND;
+
+	tpriv->reap_action = CANCELLED;
+	r = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, tpriv->urbs);
+	if(r) {
+		if (errno == EINVAL) {
+			usbi_dbg("URB not found --> assuming ready to be reaped");
+			return 0;
+		} else {
+			usbi_err(TRANSFER_CTX(transfer),
+				"unrecognised DISCARD code %d", errno);
+			return LIBUSB_ERROR_OTHER;
+		}
+	}
+
+	return 0;
+}
+
+static int cancel_bulk_transfer(struct usbi_transfer *itransfer)
+{
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_device_handle_priv *dpriv =
+		__device_handle_priv(transfer->dev_handle);
+	int i;
+
+	if (!tpriv->urbs)
+		return LIBUSB_ERROR_NOT_FOUND;
+
+	if (tpriv->reap_action != ERROR)
+		tpriv->reap_action = CANCELLED;
+
+	for (i = 0; i < tpriv->num_urbs; i++) {
+		int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, &tpriv->urbs[i]);
+		if (tmp && errno != EINVAL)
+			usbi_warn(TRANSFER_CTX(transfer),
+				"unrecognised discard errno %d", errno);
+	}
+	return 0;
+}
+
+static int cancel_iso_transfer(struct usbi_transfer *itransfer)
+{
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_device_handle_priv *dpriv =
+		__device_handle_priv(transfer->dev_handle);
+	int i;
+
+	if (!tpriv->iso_urbs)
+		return LIBUSB_ERROR_NOT_FOUND;
+
+	tpriv->reap_action = CANCELLED;
+	for (i = 0; i < tpriv->num_urbs; i++) {
+		int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, tpriv->iso_urbs[i]);
+		if (tmp && errno != EINVAL)
+			usbi_warn(TRANSFER_CTX(transfer),
+				"unrecognised discard errno %d", errno);
+	}
+	return 0;
+}
+
+static int op_cancel_transfer(struct usbi_transfer *itransfer)
+{
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+	switch (transfer->type) {
+	case LIBUSB_TRANSFER_TYPE_CONTROL:
+		return cancel_control_transfer(itransfer);
+	case LIBUSB_TRANSFER_TYPE_BULK:
+	case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+		return cancel_bulk_transfer(itransfer);
+	case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+		return cancel_iso_transfer(itransfer);
+	default:
+		usbi_err(TRANSFER_CTX(transfer),
+			"unknown endpoint type %d", transfer->type);
+		return LIBUSB_ERROR_INVALID_PARAM;
+	}
+}
+
+static void op_clear_transfer_priv(struct usbi_transfer *itransfer)
+{
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+
+	switch (transfer->type) {
+	case LIBUSB_TRANSFER_TYPE_CONTROL:
+	case LIBUSB_TRANSFER_TYPE_BULK:
+	case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+		free(tpriv->urbs);
+		tpriv->urbs = NULL;
+		break;
+	case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+		free_iso_urbs(tpriv);
+		break;
+	default:
+		usbi_err(TRANSFER_CTX(transfer),
+			"unknown endpoint type %d", transfer->type);
+	}
+}
+
+static int handle_bulk_completion(struct usbi_transfer *itransfer,
+	struct usbfs_urb *urb)
+{
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	struct libusb_transfer *transfer = __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_device_handle_priv *dpriv = __device_handle_priv(transfer->dev_handle);
+	int urb_idx = urb - tpriv->urbs;
+
+	usbi_mutex_lock(&itransfer->lock);
+	usbi_dbg("handling completion status %d of bulk urb %d/%d", urb->status,
+		urb_idx + 1, tpriv->num_urbs);
+
+	tpriv->num_retired++;
+
+	if (tpriv->reap_action != NORMAL) {
+		/* cancelled, submit_fail, or completed early */
+		usbi_dbg("abnormal reap: urb status %d", urb->status);
+
+		/* even though we're in the process of cancelling, it's possible that
+		 * we may receive some data in these URBs that we don't want to lose.
+		 * examples:
+		 * 1. while the kernel is cancelling all the packets that make up an
+		 *    URB, a few of them might complete. so we get back a successful
+		 *    cancellation *and* some data.
+		 * 2. we receive a short URB which marks the early completion condition,
+		 *    so we start cancelling the remaining URBs. however, we're too
+		 *    slow and another URB completes (or at least completes partially).
+		 *
+		 * When this happens, our objectives are not to lose any "surplus" data,
+		 * and also to stick it at the end of the previously-received data
+		 * (closing any holes), so that libusb reports the total amount of
+		 * transferred data and presents it in a contiguous chunk.
+		 */
+		if (urb->actual_length > 0) {
+			unsigned char *target = transfer->buffer + itransfer->transferred;
+			usbi_dbg("received %d bytes of surplus data", urb->actual_length);
+			if (urb->buffer != target) {
+				usbi_dbg("moving surplus data from offset %d to offset %d",
+					(unsigned char *) urb->buffer - transfer->buffer,
+					target - transfer->buffer);
+				memmove(target, urb->buffer, urb->actual_length);
+			}
+			itransfer->transferred += urb->actual_length;
+		}
+
+		if (tpriv->num_retired == tpriv->num_urbs) {
+			usbi_dbg("abnormal reap: last URB handled, reporting");
+			if (tpriv->reap_action != COMPLETED_EARLY &&
+			    tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+				tpriv->reap_status = LIBUSB_TRANSFER_ERROR;
+			goto completed;
+		}
+		goto out_unlock;
+	}
+
+	if (urb->status == 0 || urb->status == -EREMOTEIO ||
+			(urb->status == -EOVERFLOW && urb->actual_length > 0))
+		itransfer->transferred += urb->actual_length;
+
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -EREMOTEIO: /* short transfer */
+		break;
+	case -EPIPE:
+		usbi_dbg("detected endpoint stall");
+		if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+			tpriv->reap_status = LIBUSB_TRANSFER_STALL;
+		goto cancel_remaining;
+	case -EOVERFLOW:
+		/* overflow can only ever occur in the last urb */
+		usbi_dbg("overflow, actual_length=%d", urb->actual_length);
+		if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+			tpriv->reap_status = LIBUSB_TRANSFER_OVERFLOW;
+		goto completed;
+	case -ETIME:
+	case -EPROTO:
+	case -EILSEQ:
+		/* These can happen on *any* urb of a multi-urb transfer, so
+		 * save a status and tear down rest of the transfer */
+		usbi_dbg("low level error %d", urb->status);
+		tpriv->reap_action = ERROR;
+		if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+			tpriv->reap_status = LIBUSB_TRANSFER_ERROR;
+		goto cancel_remaining;
+	default:
+		usbi_warn(ITRANSFER_CTX(itransfer),
+			"unrecognised urb status %d", urb->status);
+		if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+			tpriv->reap_status = LIBUSB_TRANSFER_ERROR;
+		goto cancel_remaining;
+	}
+
+	/* if we're the last urb or we got less data than requested then we're
+	 * done */
+	if (urb_idx == tpriv->num_urbs - 1) {
+		usbi_dbg("last URB in transfer --> complete!");
+		goto completed;
+	} else if (urb->actual_length < urb->buffer_length) {
+		usbi_dbg("short transfer %d/%d --> complete!",
+			urb->actual_length, urb->buffer_length);
+		if (tpriv->reap_action == NORMAL)
+			tpriv->reap_action = COMPLETED_EARLY;
+	} else
+		goto out_unlock;
+
+cancel_remaining:
+	if (tpriv->num_retired == tpriv->num_urbs) /* nothing to cancel */
+		goto completed;
+
+	/* cancel remaining urbs and wait for their completion before
+	 * reporting results */
+	while (++urb_idx < tpriv->num_urbs) {
+		/* remaining URBs with continuation flag are
+		 * automatically cancelled by the kernel */
+		if (tpriv->urbs[urb_idx].flags & USBFS_URB_BULK_CONTINUATION)
+			continue;
+		int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, &tpriv->urbs[urb_idx]);
+		if (tmp && errno != EINVAL)
+			usbi_warn(TRANSFER_CTX(transfer),
+				"unrecognised discard errno %d", errno);
+	}
+
+out_unlock:
+	usbi_mutex_unlock(&itransfer->lock);
+	return 0;
+
+completed:
+	free(tpriv->urbs);
+	tpriv->urbs = NULL;
+	usbi_mutex_unlock(&itransfer->lock);
+	return CANCELLED == tpriv->reap_action ?
+		usbi_handle_transfer_cancellation(itransfer) :
+		usbi_handle_transfer_completion(itransfer, tpriv->reap_status);
+}
+
+static int handle_iso_completion(struct usbi_transfer *itransfer,
+	struct usbfs_urb *urb)
+{
+	struct libusb_transfer *transfer =
+		__USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	int num_urbs = tpriv->num_urbs;
+	int urb_idx = 0;
+	int i;
+
+	usbi_mutex_lock(&itransfer->lock);
+	for (i = 0; i < num_urbs; i++) {
+		if (urb == tpriv->iso_urbs[i]) {
+			urb_idx = i + 1;
+			break;
+		}
+	}
+	if (urb_idx == 0) {
+		usbi_err(TRANSFER_CTX(transfer), "could not locate urb!");
+		usbi_mutex_unlock(&itransfer->lock);
+		return LIBUSB_ERROR_NOT_FOUND;
+	}
+
+	usbi_dbg("handling completion status %d of iso urb %d/%d", urb->status,
+		urb_idx, num_urbs);
+
+	if (urb->status == 0) {
+		/* copy isochronous results back in */
+
+		for (i = 0; i < urb->number_of_packets; i++) {
+			struct usbfs_iso_packet_desc *urb_desc = &urb->iso_frame_desc[i];
+			struct libusb_iso_packet_descriptor *lib_desc =
+				&transfer->iso_packet_desc[tpriv->iso_packet_offset++];
+			lib_desc->status = urb_desc->status;
+			lib_desc->actual_length = urb_desc->actual_length;
+		}
+	}
+
+	tpriv->num_retired++;
+
+	if (tpriv->reap_action != NORMAL) { /* cancelled or submit_fail */
+		usbi_dbg("CANCEL: urb status %d", urb->status);
+
+		if (tpriv->num_retired == num_urbs) {
+			usbi_dbg("CANCEL: last URB handled, reporting");
+			free_iso_urbs(tpriv);
+			if (tpriv->reap_action == CANCELLED) {
+				usbi_mutex_unlock(&itransfer->lock);
+				return usbi_handle_transfer_cancellation(itransfer);
+			} else {
+				usbi_mutex_unlock(&itransfer->lock);
+				return usbi_handle_transfer_completion(itransfer,
+					LIBUSB_TRANSFER_ERROR);
+			}
+		}
+		goto out;
+	}
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -ETIME:
+	case -EPROTO:
+	case -EILSEQ:
+		usbi_dbg("low-level USB error %d", urb->status);
+		break;
+	default:
+		usbi_warn(TRANSFER_CTX(transfer),
+			"unrecognised urb status %d", urb->status);
+		break;
+	}
+
+	/* if we're the last urb or we got less data than requested then we're
+	 * done */
+	if (urb_idx == num_urbs) {
+		usbi_dbg("last URB in transfer --> complete!");
+		free_iso_urbs(tpriv);
+		usbi_mutex_unlock(&itransfer->lock);
+		return usbi_handle_transfer_completion(itransfer, LIBUSB_TRANSFER_COMPLETED);
+	}
+
+out:
+	usbi_mutex_unlock(&itransfer->lock);
+	return 0;
+}
+
+static int handle_control_completion(struct usbi_transfer *itransfer,
+	struct usbfs_urb *urb)
+{
+	struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+	int status;
+
+	usbi_mutex_lock(&itransfer->lock);
+	usbi_dbg("handling completion status %d", urb->status);
+
+	if (urb->status == 0)
+		itransfer->transferred += urb->actual_length;
+
+	if (tpriv->reap_action == CANCELLED) {
+		if (urb->status != 0 && urb->status != -ENOENT)
+			usbi_warn(ITRANSFER_CTX(itransfer),
+				"cancel: unrecognised urb status %d", urb->status);
+		free(tpriv->urbs);
+		tpriv->urbs = NULL;
+		usbi_mutex_unlock(&itransfer->lock);
+		return usbi_handle_transfer_cancellation(itransfer);
+	}
+
+	switch (urb->status) {
+	case 0:
+		itransfer->transferred = urb->actual_length;
+		status = LIBUSB_TRANSFER_COMPLETED;
+		break;
+	case -EPIPE:
+		usbi_dbg("unsupported control request");
+		status = LIBUSB_TRANSFER_STALL;
+		break;
+	case -ETIME:
+	case -EPROTO:
+	case -EILSEQ:
+		usbi_dbg("low-level bus error occurred");
+		status = LIBUSB_TRANSFER_ERROR;
+		break;
+	default:
+		usbi_warn(ITRANSFER_CTX(itransfer),
+			"unrecognised urb status %d", urb->status);
+		status = LIBUSB_TRANSFER_ERROR;
+		break;
+	}
+
+	free(tpriv->urbs);
+	tpriv->urbs = NULL;
+	usbi_mutex_unlock(&itransfer->lock);
+	return usbi_handle_transfer_completion(itransfer, status);
+}
+
+static int reap_for_handle(struct libusb_device_handle *handle)
+{
+	struct linux_device_handle_priv *hpriv = __device_handle_priv(handle);
+	int r;
+	struct usbfs_urb *urb;
+	struct usbi_transfer *itransfer;
+	struct libusb_transfer *transfer;
+
+	r = ioctl(hpriv->fd, IOCTL_USBFS_REAPURBNDELAY, &urb);
+	if (r == -1 && errno == EAGAIN)
+		return 1;
+	if (r < 0) {
+		if (errno == ENODEV)
+			return LIBUSB_ERROR_NO_DEVICE;
+
+		usbi_err(HANDLE_CTX(handle), "reap failed error %d errno=%d",
+			r, errno);
+		return LIBUSB_ERROR_IO;
+	}
+
+	itransfer = urb->usercontext;
+	transfer = __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+	usbi_dbg("urb type=%d status=%d transferred=%d", urb->type, urb->status,
+		urb->actual_length);
+
+	switch (transfer->type) {
+	case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+		return handle_iso_completion(itransfer, urb);
+	case LIBUSB_TRANSFER_TYPE_BULK:
+	case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+		return handle_bulk_completion(itransfer, urb);
+	case LIBUSB_TRANSFER_TYPE_CONTROL:
+		return handle_control_completion(itransfer, urb);
+	default:
+		usbi_err(HANDLE_CTX(handle), "unrecognised endpoint type %x",
+			transfer->type);
+		return LIBUSB_ERROR_OTHER;
+	}
+}
+
+static int op_handle_events(struct libusb_context *ctx,
+	struct pollfd *fds, nfds_t nfds, int num_ready)
+{
+	int r;
+	int i = 0;
+
+	usbi_mutex_lock(&ctx->open_devs_lock);
+	for (i = 0; i < nfds && num_ready > 0; i++) {
+		struct pollfd *pollfd = &fds[i];
+		struct libusb_device_handle *handle;
+		struct linux_device_handle_priv *hpriv = NULL;
+
+		if (!pollfd->revents)
+			continue;
+
+		num_ready--;
+		list_for_each_entry(handle, &ctx->open_devs, list, struct libusb_device_handle) {
+			hpriv =  __device_handle_priv(handle);
+			if (hpriv->fd == pollfd->fd)
+				break;
+		}
+
+		if (pollfd->revents & POLLERR) {
+			usbi_remove_pollfd(HANDLE_CTX(handle), hpriv->fd);
+			usbi_handle_disconnect(handle);
+			continue;
+		}
+
+		r = reap_for_handle(handle);
+		if (r == 1 || r == LIBUSB_ERROR_NO_DEVICE)
+			continue;
+		else if (r < 0)
+			goto out;
+	}
+
+	r = 0;
+out:
+	usbi_mutex_unlock(&ctx->open_devs_lock);
+	return r;
+}
+
+static int op_clock_gettime(int clk_id, struct timespec *tp)
+{
+	switch (clk_id) {
+	case USBI_CLOCK_MONOTONIC:
+		return clock_gettime(monotonic_clkid, tp);
+	case USBI_CLOCK_REALTIME:
+		return clock_gettime(CLOCK_REALTIME, tp);
+	default:
+		return LIBUSB_ERROR_INVALID_PARAM;
+  }
+}
+
+#ifdef USBI_TIMERFD_AVAILABLE
+static clockid_t op_get_timerfd_clockid(void)
+{
+	return monotonic_clkid;
+
+}
+#endif
+
+const struct usbi_os_backend linux_usbfs_backend = {
+	.name = "Linux usbfs",
+	.init = op_init,
+	.exit = NULL,
+	.get_device_list = op_get_device_list,
+	.get_device_descriptor = op_get_device_descriptor,
+	.get_active_config_descriptor = op_get_active_config_descriptor,
+	.get_config_descriptor = op_get_config_descriptor,
+
+	.open = op_open,
+	.close = op_close,
+	.get_configuration = op_get_configuration,
+	.set_configuration = op_set_configuration,
+	.claim_interface = op_claim_interface,
+	.release_interface = op_release_interface,
+
+	.set_interface_altsetting = op_set_interface,
+	.clear_halt = op_clear_halt,
+	.reset_device = op_reset_device,
+
+	.kernel_driver_active = op_kernel_driver_active,
+	.detach_kernel_driver = op_detach_kernel_driver,
+	.attach_kernel_driver = op_attach_kernel_driver,
+
+	.destroy_device = op_destroy_device,
+
+	.submit_transfer = op_submit_transfer,
+	.cancel_transfer = op_cancel_transfer,
+	.clear_transfer_priv = op_clear_transfer_priv,
+
+	.handle_events = op_handle_events,
+
+	.clock_gettime = op_clock_gettime,
+
+#ifdef USBI_TIMERFD_AVAILABLE
+	.get_timerfd_clockid = op_get_timerfd_clockid,
+#endif
+
+	.device_priv_size = sizeof(struct linux_device_priv),
+	.device_handle_priv_size = sizeof(struct linux_device_handle_priv),
+	.transfer_priv_size = sizeof(struct linux_transfer_priv),
+	.add_iso_packet_size = 0,
+};
+