From c6ab7bf13e691e870eff8d3799a5ffa6675dda13 Mon Sep 17 00:00:00 2001
From: Daniel Plasa <dplasa@gmail.com>
Date: Thu, 28 May 2020 22:12:54 +0200
Subject: add Client example

---
 examples/LittleFSSample/LittleFSSample.ino | 124 -----------------------------
 1 file changed, 124 deletions(-)
 delete mode 100644 examples/LittleFSSample/LittleFSSample.ino

(limited to 'examples/LittleFSSample/LittleFSSample.ino')

diff --git a/examples/LittleFSSample/LittleFSSample.ino b/examples/LittleFSSample/LittleFSSample.ino
deleted file mode 100644
index b5dc797..0000000
--- a/examples/LittleFSSample/LittleFSSample.ino
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
-   This is an example sketch to show the use of the espFTP server.
-
-   Please replace
-     YOUR_SSID and YOUR_PASS
-   with your WiFi's values and compile.
-
-   If you want to see debugging output of the FTP server, please
-   select select an Serial Port in the Arduino IDE menu Tools->Debug Port
-
-   Send L via Serial Monitor, to display the contents of the FS
-   Send F via Serial Monitor, to fromat the FS
-
-   This example is provided as Public Domain
-   Daniel Plasa <dplasa@gmail.com>
-
-*/
-#ifdef ESP8266
-#include <ESP8266WiFi.h>
-#elif defined ESP32
-#include <WiFi.h>
-#endif
-
-#include <LittleFS.h>
-#include <espFtpServer.h>
-
-const char *ssid PROGMEM = "YOUR_SSID";
-const char *password PROGMEM = "YOUR_PASS";
-
-// tell the FtpServer to use LittleFS
-FtpServer ftpSrv(LittleFS);
-
-void setup(void)
-{
-  Serial.begin(74880);
-  WiFi.begin(ssid, password);
-
-  bool fsok = LittleFS.begin();
-  Serial.printf_P(PSTR("FS init: %S\n"), fsok ? PSTR("ok") : PSTR("fail!"));
-
-  // Wait for connection
-  while (WiFi.status() != WL_CONNECTED)
-  {
-    delay(500);
-    Serial.printf_P(PSTR("."));
-  }
-  Serial.printf_P(PSTR("\nConnected to %S, IP address is %s\n"), ssid, WiFi.localIP().toString().c_str());
-
-  // setup the ftp server with username and password
-  // ports are defined in esFTP.h, default is
-  //   21 for the control connection
-  //   50009 for the data connection (passive mode by default)
-  ftpSrv.begin(F("ftp"), F("ftp")); //username, password for ftp.  set ports in ESP8266FtpServer.h  (default 21, 50009 for PASV)
-}
-
-enum consoleaction
-{
-  show,
-  wait,
-  format,
-  list
-};
-consoleaction action = show;
-
-void loop(void)
-{
-  // this is all you need
-  // make sure to call handleFTP() frequently
-  ftpSrv.handleFTP();
-
-  //
-  // Code below just to debug in Serial Monitor
-  //
-  if (action == show)
-  {
-    Serial.printf_P(PSTR("Enter 'F' to format, 'L' to list the contents of the FS\n"));
-    action = wait;
-  }
-  else if (action == wait)
-  {
-    if (Serial.available())
-    {
-      char c = Serial.read();
-      if (c == 'F')
-        action = format;
-      else if (c == 'L')
-        action = list;
-      else if (!(c == '\n' || c == '\r'))
-        action = show;
-    }
-  }
-  else if (action == format)
-  {
-    uint32_t startTime = millis();
-    LittleFS.format();
-    Serial.printf_P(PSTR("FS format done, took %lu ms!\n"), millis() - startTime);
-    action = show;
-  }
-  else if (action == list)
-  {
-    Serial.printf_P(PSTR("Listing contents...\n"));
-    uint16_t fileCount = listDir("", "/");
-    Serial.printf_P(PSTR("%d files/dirs total\n"), fileCount);
-    action = show;
-  }
-}
-
-uint16_t listDir(String indent, String path)
-{
-  uint16_t dirCount = 0;
-  Dir dir = LittleFS.openDir(path);
-  while (dir.next())
-  {
-    ++dirCount;
-    if (dir.isDirectory())
-    {
-      Serial.printf_P(PSTR("%s%s [Dir]\n"), indent.c_str(), dir.fileName().c_str());
-      dirCount += listDir(indent + "  ", path + dir.fileName() + "/");
-    }
-    else
-      Serial.printf_P(PSTR("%s%-16s (%ld Bytes)\n"), indent.c_str(), dir.fileName().c_str(), (uint32_t)dir.fileSize());
-  }
-  return dirCount;
-}
-- 
cgit v1.2.3